Murix

Year of construction: 1971, condition: ready for operation (used), A horizontal surface grinding machine Elb is available. Grinding process: peripheral grinding, table dimensions X/Y: 915mm/255mm, magnetic chuck dimensions X/Y: 600mm/310mm, grinding dimensions X/Y: 600mm/300mm, max. grinding height: 400mm, feed rate: 30m/min, speed: 2600rpm, machine dimensions X/Y/Z: approx. 2000mm/1600mm/2100mm, weight: approx. 2750kg. An on-site inspection is possible. Laodpjzghgisfx Afuoc

Year of construction: 1999, condition: ready for operation (used), A precision surface grinding machine Jung, overhauled in 1999, is available. Table dimensions X/Y: 600mm/250mm, grinding dimensions X/Y: 600mm/250mm, max. table-spindle center distance: 400mm, travel X/Y/Z: 500mm/400mm/200mm, table longitudinal feed: 20m/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2500mm/2000mm/1800mm, weight: approx. 2000kg, operating hours: approx. 8160h. An on-site inspection is possible. Laedjzghgcspfx Afuoc

Year of construction: 1986, condition: ready for operation (used), A horizontal precision surface and profile grinding machine Jung is available. Grinding width: 200mm, grinding length: 600mm, table dimensions X/Y: 520mm/200mm, max. workpiece weight: 100kg, table speed: 24m/min, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2000mm, weight: approx. 2300kg. An on-site inspection is possible. Ledpfozghf Sjx Afujac

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or Lodpfx Aozgci Ssfuoac 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2010, condition: ready for operation (used), A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible. Ledszf Nbljpfx Afueac

Condition: new, Year of construction: 2026, CORMAK OE4.0 TUNGSTEN ELECTRODE GRINDER – PRECISE TIG SHARPENING 1–4MM The CORMAK OE4.0 tungsten electrode grinder is a professional device designed for welding shops and industrial workshops, enabling fast, precise and repeatable preparation of TIG electrodes with diameters of 1–4mm. Thanks to its compact, solid construction and adjustable rotational speed, it ensures welding arc stability and the highest weld quality. Main advantages of the CORMAK OE4.0 grinder Versatile operation: one device for angle sharpening, end grinding and cutting the electrode to length. Precise sharpening angles: 15°, 18°, 22.5°, 30° ensuring repeatable results and a stable welding arc. Rotational speed adjustment: adaptation to the electrode diameter ensures process control and minimises the risk of overheating. Compact and mobile construction: easy to carry, ideal for workshops and service work. Low noise level and safety: fully compliant with EU standards, equipped with guards and occupational safety micro-switches. Complete consumables set: spare motor brushes included, increasing reliability and continuity of operation. Lajdpfszfgi Hox Afuoc Construction and technology of the device The CORMAK OE4.0 grinder has been designed for professional preparation of tungsten electrodes. A solid spindle bearing and precisely made housing construction minimise vibrations during operation. The 750W motor with rotational speed adjustment (up to 11,000rpm) allows the sharpening process to be adapted to the electrode diameter, ensuring repeatable results. The grinding disc cooling system and ergonomic electrode mounting guarantee safety and device durability. Precision and work efficiency Thanks to adjustable sharpening angles and the end grinding function, the CORMAK OE4.0 enables tungsten electrodes for TIG welding to be prepared in a repeatable and efficient way. Each electrode is sharpened according to the required specification, which directly translates into arc stability, reduced spatter and savings in welding material. The electrode cutting function allows the electrode length to be quickly adapted to the requirements of the welding station. Application of the tungsten electrode grinder The CORMAK OE4.0 device is used in: TIG welding, both AC and DC, in industrial and production plants, welding workshops, service departments and repair points, industrial installations requiring high precision and repeatability of welds, production processes where electrode preparation time and quality are crucial. Standard equipment CORMAK OE4.0 grinder with electrode sharpening, end grinding and cutting functions, Guards and micro-switches compliant with occupational safety standards, Spare motor brushes, User manual and CE and EC conformity documentation. Technical parameters – CORMAK OE4.0 Power supply 230V 50–60Hz Motor power 750W Rotational speed 11,000rpm Electrode diameter range 1.0–4.0mm Minimum electrode length 30mm Sharpening angles 15°, 18°, 22.5°, 30° Disc diameter Ø33.5 × Ø5 × 2.4mm Dimensions 340 × 76 × 76mm Weight 1.6kg

Condition: ready for operation (used), An internal and external cylindrical grinding machine Hille is available. Distance between centers: 1000mm, center height: 180mm, grinding length: 1000mm, max. workpiece diameter: 350mm, max. external grinding diameter: 350mm. Machine dimensions X/Y/Z: 3000mm/1300mm/1600mm, weight: approx. 4000kg. An on-site inspection is possible. Lsdpfx Afjzdumksueac

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Laedpfezcwfusx Afuoc Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Year of construction: 2017, condition: ready for operation (used), travel distance X-axis: 900 mm, controller manufacturer: SIEMENS, controller model: SINUMERIC TOUCH DITTLE control, overall weight: 40,000 kg, total width: 2,700 mm, total height: 2,500 mm, spindle motor power: 31,000 W, product length (max.): 11,500 mm, spindle speed (max.): 2,000 rpm, number of axes: 4, This 4-axis WALDRICH KLEINKNECHT WS III C 6.00 X 5000 CNC was manufactured in 2017. It features a maximum grinding length of 5,000 mm and a roll diameter capacity of approximately 600 mm. The machine is equipped with a modern CNC control system and includes essential safety equipment. If you are looking to get high-quality grinding capabilities, consider the WALDRICH KLEINKNECHT WS III C 6.00 X 5000 CNC cylindrical grinding machine we have for sale. Contact us for further details. Laedpfxszcniks Afuoc - Control Voltage: AC 230 V 50 Hz, DC 24 V, AC 24 V- Network System: TN- Mains Voltage: 3 AC 400 V ±5%- Mains Frequency: 50 Hz ± 1%- Solenoid Valve Voltage: DC 24 V- Coupling Relay Voltage: DC 24 V- Control Voltage for Monitor and PCs: AC 230 V 50 Hz- Ambient Temperature: > 5 and < 35°C- Relative Humidity: < 85%- Altitude: < 1000 m above sea level- Noise Level (Machine): < 75 dB (A)- Max. Grinding Diameter (with Ø 915 mm grinding wheel): 1,100 mm- Min. Grinding Diameter (with new grinding wheel 915 mm): 0 mm- Min. Grinding Diameter (with abraded grinding wheel 580 mm): 300 mm- Max. Workpiece Weight (in steady rests, limited by headstock framework size): 6,500 kg- Max. Workpiece Length (retracted faceplate): 5,450 mm- Center Height: approx. 750 mm- Max. Clearance Width (retracted faceplate and tailstock quill): 5,450 mm- Barrel Length: 5,150 mm- Connected Load: approx. 200 kVA (Connection power listed as 123 kW)- Machine Length: approx. 11,500 mm[- Machine Width: approx. 2,700 mm- Machine Height: approx. 2,500 mm- Machine Weight: approx. 40,000 kg- Headstock Motor Power: 22 kW- Headstock Drive: V-belt- Headstock Torque: 208 Nm- Headstock Speeds: 1-100 min⁻¹- Tailstock Center Sleeve Taper: Metric 80- Tailstock Movement: Motorized- Tailstock Clamping: Spring clamping cylinder- Tailstock Quill Travel: 270 mm- Tailstock Quill Movement: Manual and motorized- Z-Axis (Longitudinal Axis) Max. Speed: 0-6,000 mm/min- Z-Axis Motor Type: Siemens 1FT7- Z-Axis Rated Torque: 28 Nm- Z-Axis Stall Torque: 50 Nm- Z-Axis Motor Speed: 3,000 min⁻¹- X-Axis (Infeed Axis) Speed: 0-1,000 mm/min- X-Axis Motor Type: Siemens 1FT7- X-Axis Rated Torque: 3.7 Nm- X-Axis Stall Torque: 6.0 Nm- X-Axis Motor Speed: 6,000 min⁻¹- X-Axis Travel: 900 mm- X-Axis Infeed Accuracy: 1.0 µm- U-Axis (Eccentric Spindle) Speed: 50 mm/min- U-Axis Motor Type: Siemens 1FT7- U-Axis Rated Torque: 2.0 Nm- U-Axis Stall Torque: 3.5 Nm- U-Axis Motor Speed: 6,000 min⁻¹- U-Axis Travel: 3.0 mm- U-Axis Max. Crown (Radius): 1.5 mm- U-Axis Infeed Accuracy: 0.1 µm- Grinding Spindle Motor Type: Siemens 1PH8165-1DD00-2FA1- Grinding Spindle Motor Power: 31 kW (Optional upgrade to 71 kW motor at 1000 min⁻¹ and 673 Nm supported)- Grinding Spindle Motor Speed: 1,350 min⁻¹- Grinding Spindle Speed: 80-2,000 min⁻¹- Grinding Spindle Motor Torque: 257 Nm- Max. Cutting Speed (with corundum wheels): 45 m/s- Max. Cutting Speed (with CBN wheels, min. diameter 700 mm): 65 m/s- Grinding Wheel Max. Diameter: 914 mm- Grinding Wheel Min. Diameter: 580 mm- Grinding Wheel Bore: 508 mm- Grinding Wheel Max.

Year of construction: 2005, condition: used, machine/vehicle number: 120,372, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Lasdpfx Asza T Itofuec The equipment will be available for sale starting March 2027, as it is currently still in use within the production process

Condition: good (used), Professional SUHNER Rotofix workshop grinder equipped with a flexible working shaft. Robust industrial design intended for grinding, polishing, and metalworking. Device from the renowned SUHNER brand – manufactured in Germany/Switzerland. Technical condition: the device is fully functional. Visual condition: see photos – normal signs of use. Important: The grinder has cracks in the housing, visible in the photos. Additionally, one of the legs/mounting elements has been repaired previously. This does not affect the normal operation of the device – the equipment is functional and ready to use. Technical data: Manufacturer: SUHNER Model: Rotofix Motor: DKM 2 Power: 0.5 kW Power supply: 220/380V Rotational speed: 2800 rpm Frequency: 50 Hz cos φ 0.8 Protection class: IP41 Insulation class: E Included: SUHNER Rotofix grinder, flexible shaft, Lodpfxoy Uznfe Afujac working end visible in the photos. Ideal for: metalworking workshop, polishing, grinding, metalworking, industrial and manufacturing tasks.

Year of construction: 1985, condition: ready for operation (used), Offered is a conventional cylindrical grinding machine. Set to ZRO 40.10, protection class: IP54/IP32, control system: Erfurt electronic. Equipped with integrated control cabinet, workpiece feed system, separate control panel, coolant system. Weight: approx. 380kg, overall dimensions X/Y/Z: approx. 2500mm/1800mm/2000mm. Inspection possible by arrangement. Lsdjy Ulm Sopfx Afujac

Year of construction: 2009, condition: ready for operation (used), Offered is a precision internal grinding machine. Grinding range: max. Ø 357mm x 315mm, control system: CNC control system. Equipped with full enclosure, workpiece spindle head, grinding spindle carrier, separate control cabinet, extraction pipe routing. Weight: approx. 5200kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection possible by arrangement. Lsdpfxey Ulm Ee Afujac

Year of construction: 1995, condition: ready for operation (used), Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible. Ljdpfx Aoy Tx Sxjfusac

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3308294009, We offer this used Suhner Rotomax 1.5 F D10 grinding machine, manufactured in 2013, including the handpiece. Ljdpfoy Twuxox Afujac If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 235 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, controller manufacturer: SIEMENS, controller model: 840 D, overall weight: 2,600 kg, total width: 1,600 mm, total height: 2,100 mm, product length (max.): 1,900 mm, swivel angle C-axis (max.): 215 °, number of axes: 9, This 9-axis KIRNER K360HS cylindrical grinding machine was manufactured in 2009. It features a grinding spindle maximum speed of 8,500 rpm and a workpiece holder maximum diameter of 150 mm. The integrated loading robot allows for efficient automation, handling up to 1,020 pieces. If you are looking to get high-quality grinding capabilities, consider the KIRNER K360HS machine we have for sale. Contact us for further details. - X-Axis Resolution: 0.0000095 mm- X-Axis Rapid Traverse: 12 m/min- X-Axis Drive: Servomotor- Y-Axis Resolution: 0.0000095 mm- Y-Axis Rapid Traverse: 12 m/min- Y-Axis Drive: Servomotor- Z-Axis Resolution: 0.0000095 mm- Z-Axis Rapid Traverse: 12 m/min- Z-Axis Drive: Servomotor- A-Axis Rotation: Infinite- A-Axis Resolution: 0.000034°- A-Axis Speed: 100 1/min- A-Axis Drive: High-Torque Motor- B-Axis Swivel Range: 205°- B-Axis Resolution: 0.000035°- B-Axis Speed: 30 1/min- B-Axis Drive: High-Torque Motor- C-Axis Resolution: 0.000034°- C-Axis Speed: 30 1/min- C-Axis Drive: High-Torque Motor- Grinding Motor Torque: 9.5 Nm at max. 4500 1/min- Grinding Spindle Max Speed: 8,500 1/min- Grinding Wheels Dimensions: 60 x 160 mm (40 x 160 mm)- Workpiece Holder Max Diameter: 150 mm- Collet Types: K7 / W10 / W12 (optional W15)- Shank Diameter Range: 0.5 - 8 mm- Max Shank Length: 105 mm (155 mm for W10)- Loading/Unloading System: Integrated Loading Robot- Workpiece Capacity: Max. 1020 pieces (for head/shank diameter = 3 mm)- Application Range: Fully automatic complete machining of rotary burrs, dental cutters, and drills made of carbide or HSS in a single clamping- Connected Load: Approx. 12 kW Laodey S Dbiopfx Afujc

Year of construction: 1989, condition: used, machine/vehicle number: 73903, comprising: KOENIG & BAUER rough grinding machine, year 1977, serial no. 73903 and KOENIG & BAUER finish grinding machine, year 1989, serial no. 720500007, with electric workpiece feeding and loading system, BEKA UPE central lubrication system Lasdpfx Aey Sqh Nefujc

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Lasdoy R Drljpfx Afuec

Condition: used, Industrial Hydraulic Surface Grinder / Reciprocating Surface Grinding Machine Heavy duty industrial surface grinder in good original condition. Ideal for precision grinding, toolroom work, fabrication shops, engineering workshops and general machining applications. Complete machine with magnetic chuck, coolant setup and controls intact. Machine is mechanically complete and was previously workshop used. Solid cast construction throughout. Suitable for restoration, continued workshop use or export. Features: Hydraulic reciprocating table Magnetic chuck fitted Heavy duty industrial build Coolant extraction/pipework Laedpfx Afjy Rz Scjuec Manual and powered controls 415V industrial supply Condition: Used industrial condition with age-related cosmetic wear. Sold as seen. Loading available on site. Transport can be arranged at buyer’s cost. Please contact for further details, dimensions or viewing.

Year of construction: 2011, operating hours: 30,000 h, condition: ready for operation (used), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: FAGOR, controller model: 8070, number of axes: 3, This 3-axis DANOBAT CHROMA 30 was manufactured in 2011. It features a punching force of 30 t, a maximum sheet thickness of 6 mm, and a working area of 3000 x 1500 mm. The machine operates at a punching speed of 1000 strokes/min and includes a tooling system valued at €20,000. If you are looking to get high-quality punching capabilities, consider the DANOBAT CHROMA 30 cylindrical grinding machine we have for sale. Contact us for further details. • Punching force: 30 t (300 kN) • Max sheet thickness: 6 mm (currently up to 4 mm galvanized steel) • Stroke: 35 mm • Punching speed: 1000 strokes/min • X-axis speed: 120 m/min • Y-axis speed: 80 m/min • Working pressure: 6 bar • Working area: 3000 x 1500 mm • Clamping system: 3 clamps with automatic repositioning/change • Number of stations: 27 (including 4 auto-indexed stations) • Tooling system: GOITI Lasdjy Rzbkjpfx Afuec • Drive: Servo-electric (electric striker) • CNC: Fagor 8070 • Automatic clamp repositioning • Climate-controlled electrical cabinet • Apparent power: 7 kVA • Voltage: 400 V • Frequency: 50/60 Hz • Working hours: 30,000 • Maintenance: Annual inspections by manufacturer • Status: In operation • Demonstration: Can be seen running Additional equipment • Tooling set included (valued at €20,000)

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control Laodpfx Afsy H Ibisuoc We do not have any further technical data.

Condition: good (used), Year of construction: 1993, with oil filtration unit Lajdpfx Ajy H H Hqofuec Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: new, Year of construction: 2026, functionality: fully functional, Surface Grinding Machine – Column Type (Moving Column) Hardened and ground guideways in longitudinal and cross axes; counter-guides coated with Durcite-B ensure high rigidity and low friction. Longitudinal and cross movements run on V-flat guideways. Computer-controlled automatic feed including: rapid approach to workpiece, adjustable roughing and finishing feed, and automatic return to starting position after cycle completion. Preloaded axial and radial spindle bearings. Annealed machine base ensures high machining accuracy. Reinforced construction and thick-walled castings guarantee maximum rigidity. Adjustable limit stops for longitudinal and cross travel. Modern hydraulic system ensures smooth and stable table movement under heavy loads. PLC control (MITSUBISHI) with touchscreen allows programming of simple grinding cycles. Includes electronic handwheel. Standard Equipment: Touch control system Electronic handwheel Grinding wheel Wheel flange LED machine light Electromagnetic chuck Balancing stand Balancing arbor Safety guards Demagnetizer Cooling system Diamond dresser Machine feet Central lubrication system Tool kit Technical Specifications: Table size: 500 × 1200 mm T-slots: 1 / 14 mm Magnetic chuck: 500 × 1200 mm Longitudinal travel: 1140 mm Cross travel: 540 mm Max. distance spindle–table: 570 mm Max. workpiece weight: 800 kg Grinding wheel: 350 × 20–40 × 127 mm Table speed (hydraulic): 5–25 m/min Model: SGC512AHD Brand: MTP Drives & Spindle: Spindle motor: 5.5 kW Spindle speed: 1440 rpm Hydraulic motor: 2.2 kW Vertical feed motor: 0.75 kW Dimensions & Weight: Lasdpfx Afey Hr Uyjuoc Length: 3550 mm Width: 2250 mm Height: 2530 mm Weight: approx. 5200 kg Included Additional Equipment: Magnetic separator with paper filter Full machine enclosure Parallel dressing device Dust extraction system DRO (2-axis) Integrated magnetic chuck controller Frequency inverter 6 kW Diamond dresser Additional wheel flange

Year of construction: 1991, condition: ready for operation (used), A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible. Lodpfsy Hk Tzsx Afueac

Condition: ready for operation (used), A profile and surface grinding machine RBW is available. Grinding quality class: 6, rotary table diameter: 800mm, grinding diameter: 800mm, max. workpiece height: 300mm, max. workpiece weight: 1000kg. Documentation available. An on-site inspection is possible. Ledpfx Aoy Hk T Usfusac