Ice&Co Srl

Condition: used, Two-side evaporator Goedhart Iodpfx Aasxpughjbjtn -Type: DRS 52504 -Cooling capacity: 22.7 kW -Fin spinning: 4 mm -Fans: 2 x 500 mm -Dimensions: 2260 x 1600 x 530 mm -Stainless steel housing and block -Volume: 28 L -Quantity in stock: 5 -Reference number: CH 571 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Ijdpfjxpugbjx Aabstn Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Bar loader Tool presetter device Piece catcher attachment Misc. accessories MARCELS MASCHINEN CH

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Isdpfxjxpuf Ro Aabetn Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: like new (used), functionality: fully functional, Automatic divider-rounder for 4-5-6 rows, with a maximum output of 15,000 pieces/hour. Itsdpsxpuf Dofx Aabsn The electronic divider-rounder model ATHENA LARGE PLUS is designed for the production of round rolls, hamburger buns, pita bread, and pizza bases. The machine, suitable for working with soft and semi-firm doughs, is equipped with a Teflon-coated stainless steel hopper with an approximate capacity of 25 kg, and can be fed by a suitable dough feeder. The dough is gently handled by a star-shaped dosing system and compressed into the dividing chambers, which are precisely adjustable to achieve the desired weight. Once the weight has been set using the TOUCH SCREEN control panel, the dough pieces are ejected and enter the rounding drum, which can be easily exchanged according to the required weight range. During machine operation, it is possible to adjust both the rounding speed and production speed independently and simultaneously via the TOUCH SCREEN control panel. At the end of the process, the adequately rounded dough pieces are deposited on the 800 mm long discharge conveyors (standard equipment). The TOUCH SCREEN control panel with 50 programmable memory settings and PLC-based operation management allows weight, production speed, and rounding speed to be set. Hourly output is 1,000–2,500 pieces per row (42 cycles/min).

Condition: used, Year of construction: 2020, 30 FT container with Viesmann oil-gas boiler, type: VITOPLEX 200, serial number: 7438490000043 103, volume: 2420 liter, 230 V, 50 Hz, max 6 A, rated output for oil-gas: 1950 kW, combined rated input: 2120 kW, PS: 6 bar, TS: 110 °C. Ijdexpufwjpfx Aabotn

Condition: used, Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Ijdpfoxpufqjx Aabetn Weight: approx 2 T

Condition: excellent (used), mileage: 1,83,432 km, power: 315 kW (428.28 HP), first registration: 02/2022, fuel type: diesel, axle configuration: 4x2, fuel: diesel, wheelbase: 5,500 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 7,200 mm, loading space height: 2,500 mm, Year of construction: 2022, Equipment: air conditioning, cruise control, onboard computer, soot filter, tail-lift, trailer coupling, = Additional Options and Equipment = - Adaptive cruise control - Airbags - Heated mirrors - Power brake booster - Electric windows - Electrically adjustable exterior mirrors - Low noise operation - Enclosed cab - Speed limiter - Power steering - Air suspension seats - Fog lights - Particulate filter - Seat heating - Central locking system = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,677 cc AdBlue system: Yes Transmission: 12-speed automatic Maximum front axle load: 8,000 kg Maximum rear axle load: 11,500 kg Dimensions Measurements (L x W): 980 x 255 cm Weights Unladen weight: 9,530 kg Payload capacity: 10,970 kg gross vehicle weight (GVW): 20,500 kg Functional Tail lift: Rear gate, 2,000 kg Loading platform height: 110 cm Ijdpfx Ajxpufkoabjtn Maintenance, History, and Condition APK (General Technical Inspection): New TÜV upon delivery Technical condition: very good Optical condition: very good Additional Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for further information. = Company Information = hello

Condition: used, Year of construction: 2009, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: Itedsxpufdopfx Aabon Description SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Demag 210: Screw diameter Ø 50 mm

Condition: good (used), Year of construction: 1987, functionality: fully functional, turning height: 1,335 mm, workpiece weight (max.): 12,000 kg, turning diameter: 1,500 mm, table diameter: 1,250 mm, Equipment: 4 in one shovel, The machine is in good technical condition, connected to power and can be tested. CNC control system Mefi 859 DUAL. Itedpfx Aaoxpud Toben

Condition: excellent (used), Working travels 700 x 420 x 610 mm Table size 1260 x 490 mm Spindle taper HSK E50 Spindle speeds 50-36'000 U/min Tool changer 42 Pos. Control HEIDENHAIN iTNC 530 3D measuring tracer Tool breakage control Tool length and diameter measuring device Iedpfx Aoxpud Hsabotn MARCELS MASCHINEN CH

Condition: used, Year of construction: 1988, Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Iodpexpudyjfx Aabjtn Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) Iodpfjxpudtox Aabjtn - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: used, Year of construction: 2017, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 Designation: SGM Operating hours: 29,125 Cycle counter: 26,530 Total cycles: 3,562,329 Itjdpfx Aaoxpudmjbjn Cylinder heating, electric drives Sumitomo Demag IntElect 150/520-610 Demag 150: Screw diameter Ø 45 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 12,300 h, HITACHI crawler excavator type ZX 670 LCH-3 Year of construction: 2011 Hours: 12,300 hours Engine brand: ISUZU Iedsxpudaopfx Aabetn Engine power: 345 KW Excavator weight: 67 300 KG Supplied with a bucket in perfect condition. Operating status OK

Condition: used, mileage: 5,13,000 km, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, number of seats: 2, first registration: 10/2007, Equipment: crane, Mercedes-Benz Actros 3344 6x4 EPS transmission, 3rd pedal clutch 3-axle two-way tipper Bordmatik left side Rear tailgate Leaf suspension Removable rear crane PK 18002-C 4-fold extension 12.5m/1150kg Remote control 5th & 6th hydraulic circuit + rotator Year of manufacture: 2014 Subject to errors and typographical mistakes! Itjdjxpuc Nopfx Aaben

Condition: used, Column-Mounted Crane DEMAG type PK1 N-F Capacity: 125 kg Arm travel: 3500 mm Iedpfx Ajxpubxeabstn Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist Chain exit: length 2100 mm In good condition Voltage: 380 V Weight: approx 250 kg

Condition: excellent (used), Working travels 400 x 210 x 340 mm Table size 600 x 400 mm Spindle taper ISO40 Spindle speeds 40-2000 rpm Isdpexpubrjfx Aabetn digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2010, Arburg Allrounder 470 H 1000-170, year of manufacture 2010 Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Shot weight: 77 g Itedpfx Ajxpublsabsn With Arburg robot

Condition: used, Year of construction: 2009, Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Isdpfsxpubfjx Aabetn Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters

Condition: excellent (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, cutting height (max.): 160 mm, height adjustment type: hydraulic, Technical Description – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine offered is a double edger of the type PAUL KMEZ-750-L, year of manufacture 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Circuit protection: 80 A • Control voltage: 24 V DC Saw technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: • Infeed rollers for easy material feeding • Integrated alignment scanners for automatic positioning • Batten sleeve Iedsxpua Uspfx Aabetn • Waste block separator • Outfeed table for orderly material discharge This high-quality machine from PAUL is designed for continuous use in industrial wood processing and is equipped with practical additional features that enable efficient workflow.

Condition: good (used), mileage: 8,28,149 km, power: 552 kW (750.51 HP), fuel type: diesel, color: red, axle configuration: 8x2, tire size: 385/65R22.5, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, Equipment: air conditioning, differential lock, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Front windshield - Leather interior - Leather upholstery - Air suspension - Metallic paint - Pre-heating automatic system - Power take-off (PTO) = Remarks = Volvo FH16.750 8x2*6 - Palfinger PK15002 - Show truck + Trailer MY: 6-10-2016 / 24-8-2011 Mileage: 828,149 km VIN: YV2R0P0F8GA790307 / UMTP430TT1AMT2280 Crane: Palfinger PK15002 / S205-SK-A, Year 2006 (refurbished 2016) 8x2 - 3x steering axles Full air suspension Custom interior and exterior + MTDK Trailer - 4 axles = Further Information = General Information Year of manufacture: October 2016 Itjdpfexpua Iex Aabjn Drivetrain AdBlue system: Yes Transmission Transmission: I-Shift, 12 speeds, automatic Axle Configuration Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Left tire tread: 60% Front axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Steering; Left tire tread: 60% Rear axle 1: Tire size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 12,000 kg; Inner left tire tread: 60%; Outer left: 60%; Inner right: 60%; Outer right: 60% Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Steering; Left tire tread: 40% Weights Gross vehicle weight (GVW): 35,500 kg Functionality Crane: Yes Body brand: Palfinger PK15002 Interior Upholstery: Leather Condition Technical condition: Good Optical condition: Good Further Information Please contact VAEX The Truck Traders for more information.

Condition: like new (used), functionality: fully functional, power: 11.8 kW (16.04 HP), fuel type: electric, color: blue, overall weight: 3,900 kg, empty load weight: 3,900 kg, operation weight: 3,900 kg, maximum load weight: 3,600 kg, lifting power: 3,600 kg/m, lifting height: 8,000 mm, tire condition: 90 %, number of seats: 1, Year of construction: 2021, Equipment: UVV, additional headlights, adjustable boom, crane, head guard, low noise, traction control, === KEY SPECIFICATIONS === Year: 2021 Operating hours: On request Max. lifting capacity: 3,600 kg Max. lifting height: n/a (max. working height approx. 8.0 m) Boom outreach: approx. 6.8 m Power supply: Electric (80V – 300Ah battery) Remote control: Yes (radio-controlled) Jib: Optional (foldable mechanical or hydraulic jib) Attachments / Additional equipment: Hydraulic winch, foldable mechanical or hydraulic jib, optional lithium battery, ATEX conversion, Valla Connect system, non-marking tyres, variable tilt head, hook, radio remote control. Tyre type: Solid, non-marking rubber (standard) Tyre size: – Front: 2 × Cushion 22x8x16 – Rear: 2 × SE 16x6-8 Weight: 3,900 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE-certified with complete documentation Ijdpfx Aajxpuazsbetn Compact electric design – ideal for indoor use and sensitive environments Only 900 mm wide – fits through standard doors Full radio control and zero-emission performance === CONDITION === Excellent working condition – fully inspected, serviced, and tested by certified professionals. Low operating hours, available for immediate inspection. === LOCATION & DELIVERY === Located in Sittard, the Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) === MARKETING DESCRIPTION === The Valla V36R is a compact electric pick & carry crane with a lifting capacity of 3.6 tons and a total weight of only 3.9 tons. With radio remote control, non-marking tyres, and zero-emission electric drive, it is perfect for indoor applications, production halls, maintenance areas, and cleanrooms. The machine is only 900 mm wide and offers a maximum working height of around 8 meters, ensuring exceptional manoeuvrability and efficiency. Fully CE-certified and available with various options such as a hydraulic jib, lithium battery, or ATEX conversion. Ready for immediate use from our stock in Sittard. === DELIVERY === Crane loading available on request for smooth handling at departure. Flexible shipping options tailored to your destination and logistics needs. All transport is handled professionally by the Collé Rental & Sales logistics team.

Condition: used, Year of construction: 2024, as-new injection moulding machine from Dr Boy 50 E, year 2024, with only 2 operating hours Itodpfx Aasxpuaujbsn

Condition: used, Year of construction: 2017, Arburg 470S 1100-290, year 2017, 2-component machine. The machine has been idle for some time without a contract. It is from 2017 and has only around 21,600 operating hours. The machine features a clamping force of 1100kN; the lower unit is equipped with a 290 injection unit with a 35mm screw, while the upper unit has a 100 injection unit with a 30mm screw. Up to now, only ABS and TPE materials have been processed. The machine is equipped with an integrated hot runner system and three core pulls, as well as additional options. Included in the scope of delivery is a Kuka handling robot, which is operated via the machine’s Selogica control system, along with the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Itsdpfx Asxpuanoaben

Condition: excellent (used), Mesh belt continuous furnace CIEFFE Itsdpfx Aajxpuahjbon type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)