RUKU Sauna-Manufaktur GmbH & Co. KG

Condition: ready for operation (used), A Poltech chamber blasting system with manual blasting media application is available. Blast chamber dimensions X/Y/Z: approx. 6000mm/4000mm/3000mm. Documentation available. An on-site inspection is possible. Gedpfxjzdkpue Albjuc

Year of construction: 2008, operating hours: 21,330 h, condition: used, functionality: fully functional, machine/vehicle number: 1013813, We are offering this used Wheelabrator HB 10/12 shot blasting machine for cast parts, manufactured in 2008. Manufacturer: Wheelabrator Type: HB 10/12 Serial number: 103813 Year of manufacture: 2008 Rated voltage: 3 x 400 V Rated power: 20 kW Rated frequency: 50 Hz Rated current: 40 A Weight of main module: 4,500 kg (according to drawing); estimated weight of other parts: 3,000 kg. The system was assembled in the following modules: - Blasting chamber as the main element - Crane system in front of it - Guard rails - Bucket elevator It should also be possible to disassemble it into these 4 units. The complete documentation, including electrical diagrams, drawings, and operating manual, is available in German. Godpszc H Hbofx Albouc Drawing with dimensions, see PDF. A series of images is also attached here as a PDF. We also have a video; please contact us, and we can provide it to you. The system should be disassembled by you. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2023, condition: ready for operation (used), A Thielenhaus microfinish/superfinish machine for precision surface finishing of rotationally symmetrical components such as shafts, camshafts, crankshafts, and similar precision parts is available. Application range: shaft machining, max. machining length: 750mm, max. workpiece diameter: 100mm, max. travel: 650mm. Machine dimensions X/Y/Z: approx. 2100mm/1450mm/2050mm, weight: approx. 1800kg. Including SL50 belt finishing unit, Elbaron RON 60 SV oil mist extraction system, and workpiece holder. Documentation available. An on-site inspection is possible. The machine was used for sample machining and has hardly run. Guedpfszcyqajx Albec

Condition: excellent (used), Year of construction: 2019, Entrance dimensions: max. width: approx. 2 250 mm max. height: approx. 1 700 mm - Passage dimensions: max. width: 2 000 mm max. height: 1 500 mm - Main blast area width: 1 500 mm height: 1 200 mm Godpszcfmgjfx Albsuc - Plates: max. width: 2 000 mm max. thickness: 50 mm min. thickness: 6 mm, ≤ 6 mm only on auxiliary constructions - Profiles: up to max. IPB 1 000 - Minimum length: approx. 3 000 mm in case of roller pitch of approx. 1 000 mm Small, light parts, small flat profiles, plates thinner than 6 mm etc. and pipes have to be transported on support constructions Roller conveyor load max.: 1 000 kg/m

Year of construction: 2018, condition: like new (used), OTEC Special Purpose Machine SF 170/270/1000 for Camshaft Bearings For sale is an OTEC special purpose machine for the machining and surface finishing of camshaft bearings. The system is suitable for machining both short and long camshaft bearings and has been designed for industrial series applications. Technical data: Manufacturer: OTEC Machine type: SF 170/270/1000 Application: Machining and surface finishing of camshaft bearings Machine dimensions: • Length: approx. 2,586 mm • Width: approx. 798 mm • Height: approx. 1,785 mm • Loading height: approx. 920 mm Weight: • Machine weight: approx. 1,200 kg • Transport weight: approx. 1,400 kg Electrical connection data: • Voltage: 3 x 400 V • Frequency: 50/60 Hz Gjdpezb Abxsfx Albsuc • Fuse rating: 32 A • Connected load: 12.5 kVA • Max. power consumption: 10 kW Compressed air connection: • Operating pressure: 6 bar • Connection: DN 7.2 (R 1/4”) Water connections: • Inlet: 3/4” (Ø 16 mm) • Outlet: 1 1/4” (Ø 31 mm) Workpiece dimensions: Long camshaft bearing: • Length: approx. 177.5 mm • Inner diameter: approx. 89 mm Short camshaft bearing: • Length: approx. 89 mm • Inner diameter: approx. 89 mm Special features: • Robust industrial design • Compact footprint • Automated machining process • Suitable for series production • Integrated media connections for compressed air and water Location: Germany Inspection possible by appointment.

Condition: refurbished (used), Shot blasting machine, Turntable Shot Blas Machine, abrasive blasting machine, surface treatment machine, Wheelabrator-Berger, Used Machine Manufacturer: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG Machine No.: 8502 Order No. (Kom. Nr.): 80305 Overall Dimensions Width: 2000 mm Depth: 2150 mm Height: 3900 mm Dust Collector Dimensions Width: 1400 mm Depth: 1270 mm Height: 3500 mm Dust Collector Manufacturer: Abrasiv Technical Specifications Automatic cleaning process with air blow-off Total electrical power: 15 kW Guedpfszbqp Dsx Alboc Refurbished shaft and belt pulley Two electric motors have been rewound

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, pressure: 58 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Internal dimensions (W x D x H): 1,200 x 800 x 600 mm Pressure range: approx. 58 bar Air consumption: approx. 1,000 to 3,000 l/min Guodpfxezaqu Ds Albsc EQUIPMENT Blasting process: Compressed air blasting Turntable Workpiece mounting: Rotary table Operation: Glove-box operation Blasting hose: High-pressure blasting hose Blasting media circuit: Recycling system included Extraction: External unit External reference: 758

Condition: good (used), Storage location number: 3109 Manufacturer: Econoline Machine number: Gsdpjzaavwjfx Albsuc Type/Model: 101698G-A Table surface: 1,000 x 1,000 mm Internal height: 800 mm Accessories/Equipment: Dust extraction system LEESON 0.3 kW Condition: good Dimensions: 1,100 x 1,400 x 2,000 mm Weight: 230 kg

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Gusdpjy T N Iqefx Albjc

Year of construction: 2018, condition: used, The year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to a maximum of L x W x H: 8,000 x 2,000 x 2,000 mm, maximum crossbeam load: 2,000 kg/carriage, material: steel. Pos. 1: Washing booth, Jumbo-Clean with stainless steel interior for degreasing/phosphatizing of steel, either automated or with manual spray lance. Pos. 2: 1 set of belt filters. Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing booth, including a central lance. Pos. 4: 1 fresh water treatment system. Pos. 5: 1 manual conveyor with 1 electric cross-travel carriage. Pos. 6: 1 lifting/lowering station, Jumbo-Lift 2000, integrated into the cross-travel carriage. Pos. 7: 1 indirect gas-heated flash-off oven/powder drying oven/wet coating drying oven, door opening W x H: 2,800 x 3,100 mm, clear length: 9,500 mm, overall W/H/L approx.: 4,000/5,000/10,000 mm. Guedpfx Aley T Nzdjbsc Pos. 8: 1 end-face powder coating extraction system for an on-site painting booth for spraying and drying operations. Pos. 9: 1 manual coating unit, OptiFlex(R)2. Pos. 10: 1 structure for on-site steel construction. Pos. 11: Control cabinet.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, Complete industrial chrome and nickel plating installation, fully automatic, in perfect operational condition, including its own automated wastewater treatment plant, designed and scaled specifically for the line (with a treatment capacity of 12,000 liters per cycle), as well as a bath heating boiler with coil circuit. The line was originally commissioned in 2000 and has been continuously refurbished, modernized, and maintained, with a notable conversion to trivalent chrome carried out in 2024, making it fully compliant with current environmental regulations. Total volume of process baths: 43,600 liters, distributed among nickel stripping, pickling and degreasing, nickel Watch, acid copper, semi-bright nickel, bright nickel, trivalent chrome, and trivalent chrome passivation. Guedpjy Sw Suefx Albsc

Condition: used, machine/vehicle number: 121-1-0-30, Separate control and switch cabinet system, nonwoven filter unit Gedpfx Asy Sqitolbouc

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 123168, Like-new equipment; currently located at the subsidiary plant. Guedpfsy R Ah Eox Albsc plasma.com/low-pressure-plasma-tetra-30/

Condition: used, Manufacturer: Kuderer Maschinenbau GmbH Model: AZ-2 Year: 1992 Belt Grinder Overall dimensions: 1000 x 440 x 1080 mm Belt size: 150 x 1440 mm Power: 1.5 kW Godpoy N Nw Rsfx Albouc Extractor Overall dimensions: 560 x 560 x 690 mm

Year of construction: 2013, condition: ready for operation (used), A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible. Gedpfxey Nm Uto Albeuc

Year of construction: 2005, condition: used, functionality: fully functional, We are offering this used Technical Nowa Sól OWPS 4.3x3.8x3.0 wheel blast machine, year of manufacture 2005. The equipment is fully functional and complete (currently disconnected from the power supply) and includes a dust extraction filter for the blasting chamber. Gsdpfey I Rq Njx Albeuc Maximum weight of treated workpieces: 250 kN Maximum workpiece dimensions during table rotation and wheel blasting: φ3500×2000 mm Maximum load length without table rotation and with pneumatic blasting: 4300 mm Maximum load width without table rotation and with pneumatic blasting: 3800 mm Maximum load height without table rotation and with pneumatic blasting: 3000 mm Number of blast wheels: 4 pcs Capacity per blast wheel: 350 kg/min Drive power per blast wheel: 22 kW Recommended blasting media: cast steel shot or stainless steel shot Recommended media granulation: 0.2–2.0 mm Pneumatic apparatus tank capacity: 200 liters Pneumatic apparatus nozzle diameter: 11 mm Compressed air pressure: 0.4–0.6 MPa Compressed air requirement for the shot blaster: 0.4 m³/h Compressed air requirement for dust collector regeneration: 10 m³/h Compressed air requirement for pneumatic cleaning: 8 m³/h Type of dust collector: dry bag filter (fabric), regenerated with compressed air pulse Installed power (excluding dust collector fan): 130 kW Supply voltage: 400/230 V Frequency: 50 Hz If you have any questions or require further information, please send us a message or contact us by phone.

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 with heating 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Technical data: Max. load weight: 20 kg Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Gsdpfxey I Nr Ej Albouc Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Operating manual + wiring diagrams The machine can be inspected under power.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 690 mm, total length: 600 mm, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, space requirement height: 900 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 30 Watt (Optional: 20 Watt, 50 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures Guodey I Nbmspfx Alboc - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: good (used), Small sandblasting unit Internal dimensions: 1.2 x 1.2 x 0.6 m (L x W x H) Operating pressure: 8 bar Equipped with extraction system, loading table, and spare parts (see photos) Transport and loading can be organized across Europe for an additional fee upon request. Gusdpfx Aey H Idwolbec Prices quoted are exclusive of VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For more information or contact options, please reach us via the contact form.

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc Godpfx Aey H D Acolbjuc - Maximum plate format: 50 x 65 cm - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Gujdpfsy E S Evox Albec

Condition: used, functionality: fully functional, High-precision industrial multi-wire cutting machine designed for cutting hard and brittle materials. Guedpfx Aley Ey I Sebec

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 60180, Republic Lagun VBM vertical spindle surface grinding machine 1000-F Gusdpfx Aljy Ey Dtobec

Condition: used, functionality: fully functional, machine/vehicle number: 113509, High-precision surface grinding machine Willis, 460V, industrial grinder Gedpfjy Eyt Uox Albjuc

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 2706CNC00217, The JAINNHER CNC cylindrical grinding machine is designed for grinding the external surfaces of cylindrical and conical parts in automatic and manual modes using longitudinal and plunge grinding. Gsdsy Exi Ijpfx Albjuc