Bilse OOD

Year of construction: 1997, condition: good (used), machine/vehicle number: 792-235, Offer 25370 Iijdpfx Ajxph Tuoabsh Technical Data: - Machine for producing complete profiles from SCHÜCO - Aluminium half-shells from various SCHÜCO series. - Polyamide or polythermide insulating bars are used as connecting elements. - Angle adjustment for profiles intended for façades and skylight structures - Max. profile cross-section: - Profile depth up to 250 mm - Profile height up to 300 mm (at a maximum insulating bar spacing of 300 mm) - Working direction: right to left (not reversible) - Foiling unit - Foiling device for 3 sides on façade profiles - Straightening roller set - Infeed roller conveyor – outfeed roller conveyor - Various profile roller sets - Pneumatic connection: 8 bar - Power supply: 2 x 400 V - Space requirement: approx. W 16,500 x H 1,250 x D 1,600 mm - Weight: approx. 2,000 kg

Year of construction: 2009, condition: good (used), Mitre Saw Elumatec, Type: MGS 105, Year: 2009, with stop and measuring system Elumatec Type: AMS 200 Serial No.: 1050126568 Swivel range: Manual, 22.5° left and right, with digital display Tilt range: Pneumatic, from 90° to 45° Saw blade diameter: 420 mm Saw blade speed: 2,800 rpm Power output: 4 kW Electrical connection: 230/400 V, 3Ph, 50 Hz Compressed air connection: 7 bar Air consumption: 20 l without misting, 32 l with misting Dimensions (L x W x H): 1,400 x 1,500 x 1,880 mm Weight: 750 kg Stop and measuring system AMS 200 For precise cutting-to-length of aluminium profiles Serial No.: 1050126568 Length: 4,500 mm Positioning accuracy: +/-0.1 mm per meter Electrical connection: 230 V; 1 Ph, 50/60 Hz Pneumatic position locking Matrix display 5.7" with membrane keypad and navigation dial for operating menus Memory for 1,000 records The memory can store set number, length measurement, profile number, angle position, and quantity. USB interface (front) Roller conveyor Ijdpfexn Umlsx Aaboih (Changes and errors in technical data as well as prior sale reserved)

Condition: used, Max. saw blade diameter: 400 mm Iodpsxn Nwljfx Aaboih Pneumatic material clamp Manual feed

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) Iijdpfx Aasxn Iq Djbjh 1000 kg

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Iiedpfx Aaexl Dz Tjbeh Pneumatic material clamps Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: good (used), Year of construction: 2009, Ideal for processing insect protection systems! For saw blade D 500 mm, cutting length 5,000 mm Double mitre saw with pneumatically outward swiveling heads, designed for cutting aluminum and PVC profiles. The movable right saw unit automatically positions itself to the profile length entered in the control system. In addition to all required safety devices, the scope of delivery includes both vertical and horizontal clamping devices. Swiveling of the heads The units swivel via pneumatic cylinders. Mitre cuts from 90° to 22.5° outward are possible. Intermediate angles can be set manually using a corresponding stop. The cutting area is equipped with protective hoods that open and close automatically. Profile support roller conveyor at the movable unit with clamping device Spray mist system Macro function included Isdpfoxgpvrex Aabeih A suitable extraction system is also currently available as an option!

Year of construction: 1995, condition: used, Max. saw blade diameter: 400 mm Iodpsxf Hb Nefx Aabeih Pneumatic material clamps

Condition: good (used), Year of construction: 1998, machine/vehicle number: 25320, Offer 25282 Technical data: Iiodpfx Aaoxcwk Asbsh - Saw blade diameter: 600 mm - Cutting range at 90°: 190 x 190 mm / 100 x 310 mm - Mitre cut at 45°: 170 x 170 mm / 100 x 220 mm - Saw blade speed: 2800 rpm - Drive power: approx. 4.5 kW - Required space (approx.): W 1470 x H 1800 x D 1550 mm - Weight (approx.): 450 kg - Digital angle position indicator - Pneumatic system with pneumatic clamping cylinder - Saw blade - Outfeed roller conveyor with length stop and digital display, 5000 mm

Year of construction: 2025, condition: new, The TAS-4 Cross-Cut Saw with a 400 mm blade is a robust and efficient machine, designed for longitudinal cutting of profiles, aluminum and PVC sheet metal with maximum precision and safety . 400 mm cutting disc with 3 HP motor , ideal for demanding jobs. Iijdpfexcvkzsx Aabjh Adjustable cutting width , adaptable to different profiles and materials. Lighting in the cutting area for greater precision and visibility. Chip collection drawer , which facilitates cleaning and maintenance of the work area. Cooling system with coolant spray , which optimizes aluminum cutting and extends the life of the disc. Mechanical height sensors , which guarantee accuracy in each cycle. Horizontal and vertical presser kits , along with rolling paths to facilitate the entry and exit of profiles.

Year of construction: 2014, condition: used, Automatic cutting machine for PVC profiles Ijdjxb U N Hepfx Aabsih loadingtabel for 6500 mm lenght unloading table Labelprinter Sawblade diameter 500 mm cuttinge angles -45°/90°/+45°

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 420 mm, saw blade speed: 2,800 rpm, air pressure: 7 bar, Double-head saw for cutting aluminium and PVC profiles. Features a short-length stop, E555 electronics, two sliding profile holders. Rollers on the movable head. Lubricators for blade lubrication when cutting aluminium. Iiedpfoxb Anqjx Aabeh

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 450 mm, type of input current: three-phase, input voltage: 380 V, length stop: 4,000 mm, Cold circular saw Eisele PSU 450, well-maintained and fully functional condition, with electro-pneumatic length stop, including various segment and solid steel saw blades. Iedjw U Ahropfx Aabjih

Condition: used, Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum quantity spray device Table can be rotated on both sides with locking points at 45° Iiodpfx Ajw Tyzaeabsh Roller conveyor and stops on request

Year of construction: 1992, condition: used, Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spray device Pneumatic material clamps Iiedpsw Tbkijfx Aabjh Miter cuts possible on both sides 2-hand operation

Year of construction: 2018, condition: good (used), functionality: fully functional, This double-head sawing machine is operational and in good condition. It is suitable for processing aluminium and PVC profiles. Technical specifications: • Manufacturer: FomIndustrie • Type: BLITZ ALVA 500 • Category: Sawing machine • Year of manufacture: 2018 Iedpfsw Tarxex Aabsih • Saw blade diameter: 500 mm • Tool speed: 2,800 rpm • Maximum workpiece length: 6 metres Viewing can be arranged upon request.

Year of construction: 2006, condition: used, Max. saw blade diameter: 250 mm Iedpfxow S I Ewj Aabjih Manual material tensioner Saw blade lubrication

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offer – Double Mitre Saw Emmegi Norma 400 We are pleased to offer you the Emmegi Norma 400 double mitre saw – a precise and reliable machine for professional cutting of aluminium and PVC profiles. Technical Data: Iiedpfx Aew R T Tqoabsh - Saw blade diameter: Ø 400 mm - Cutting length: up to approx. 4,000 mm, minimum length approx. 485 mm - Saw head swivel range: ± 45° (inwards/outwards) - Drive: Hydropneumatic feed, motor power 2.2 kW per head, braking time approx. 10 s - Workpiece clamping: Pneumatic, horizontal and vertical, with 'low pressure' safety feature - Cooling: Oil-water micro-mist system

Condition: good (used), Year of construction: 2019, machine/vehicle number: 252-19, Offer 25269 Technical specifications: Ijdpfx Ajw R S Nwjabsih - Saw blade speed, frequency-controlled for ultra-fine cutting - Saw blade diameter: 200 mm - Automatic work cycle - Pressure stop with SICO counter for setting glass contact pressure – simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand Iedpjw Nhumofx Aabjih

Year of construction: 1998, condition: used, functionality: fully functional, Rapid dgl the saw blades automatically adjust to the desired dimension, control via touch panel, blade diameter 500 mm rotation speed 2710 cutting angle 45-90° cutting length approx. 3000 mm pneumatic clamping Iodpjw I Hz Ajfx Aabeih air requirement 200 NI the saw is in excellent condition, ready for immediate use, testing possible, invoice issued

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Iijdpew Iwaiofx Aabeh Dimensions without roller tables: 71 x 100 x 140 cm.

Year of construction: 1999, condition: used, Saw blade diameter: 300 mm Manual material tensioner Ijdpfx Aasw Im Trjboih Minimum quantity spray device 120 kg

Condition: excellent (used), functionality: fully functional, Length stop Graule RLH 3 m Iiedpfew Icqmjx Aaboh

Year of construction: 2021, condition: like new (used), The MAESTRO glazing bead saw is designed for cutting aluminum and PVC glazing bead profiles. The pneumatic feed carriage ensures smooth and precise cutting with 4 blades set at 45°. The machine is equipped with a quick height adjustment system to reduce tooling time. TECHNICAL SPECIFICATIONS: • No. 2 blades Ø200 mm • No. 2 blades Ø116 mm, thickness 4 mm • No. 2 motors, 1.1 kW each • Fixed blade angle at 45° • No. 2 vertical pneumatic clamps • Side support Iodpfx Aajw D Dq Uoboih • Two-hand safety control

Year of construction: 1999, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Iiodpjw Dplkefx Aabeh Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-hand operation 800 kg