Cm Industrie

Condition: good (used), Year of construction: 2004, functionality: fully functional, Colchester CNC lathe Model Tornado T 220 S Year : 2004 Ncedpoy T E Tcofx Aqvjt Turning lenght : 540 mm. Turning diameter : 290 mm. Sving over bed : 510 mm. RPM : 3500 Spindle borer : 66 mm. Tools in revolver :12 stk. Control : FANUC 21i - TB Chuck - Toolholder - Interface RS-232 C - Coolant

Operating hours: 68,816 h, condition: ready for operation (used), functionality: fully functional, overall weight: 5,500 kg, total length: 4,500 mm, total width: 1,950 mm, total height: 1,750 mm, torque: 263 Nm, turning diameter: 290 mm, bar diameter (max.): 72 mm, bar passage: 72 mm, chuck outer diameter: 200 mm, feed length X-axis: 212 mm, feed length Z-axis: 640 mm, quill diameter: 80 mm, quill stroke: 100 mm, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 10 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, swing diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, turning length: 640 mm, type of input current: three-phase, machine/vehicle number: 310142, Equipment: documentation/manual, Basic Data Manufacturer: Gildemeister Type: CTX 400 Machine No.: 310142 Year of Manufacture: Not specified, presumably early 1990s Control System: Gildemeister EPL / Grundig Operating Hours: 68,816 h Weight: 5,140 kg Dimensions L x W x H: 4,527 x 1,940 x 1,730 mm Connection: 400 V / 50 Hz Power: 45 kVA Turning Data Minimum Spindle Speed: 25 rpm Maximum Spindle Speed: 5,000 rpm Maximum Torque: 210 / 263 Nm Turning Diameter: 290 mm Turning Diameter over the Way Rest: 500 mm Turning Diameter over the Facing Slide / Facing Guide Cover: 290 mm Turning Length: 640 mm Bar Diameter / Spindle Bore: 72 mm Chuck Outer Diameter: 200 mm Axes / Travels Feed Travel X-axis / Facing Travel: 212 mm Feed Travel Z-axis / Longitudinal Travel: 640 mm Rapid Traverse X-axis: 10 m/min Rapid Traverse Z-axis: 15 m/min Y-axis: Not available / leave blank Tailstock Quill Diameter: 80 mm Ncodpfjy Tx Awsx Aqvjt Quill Stroke: 100 mm Quill Taper: MK 4 Maximum Quill Pressure: 800 daN Tool Holder Tool Stations: 12 Tool Holder: VDI 30 Powered Tools: Not available / do not enter C-axis: Not available / do not enter

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 70 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, rotational speed (min.): 70 rpm, rotational speed (max.): 3,800 rpm, total height: 1,800 mm, total length: 3,900 mm, total width: 1,800 mm, For sale is a robust and reliable Okuma CNC lathe, model LB15, with an integrated Okuma robot and automatic material feed. The machine is ideally suited for automated series production and impresses with its high reliability and stable design. The machine is in working condition and can be inspected under power by arrangement. Technical data: * CNC control: OSP 5000L-G CNC system (German) * Data transmission: RS232 * Tool turret: 12 positions * Spindle speed: 70–3800 rpm * Spindle power: 11 kW (30 min) / 7.5 kW continuous operation * Spindle bore: Ø 75 mm Njdpfsy Tp D Sex Aqvsct * X-axis travel: 400 mm * Z-axis travel: 500 mm * Feed rate XZ: 12,000 mm/min * Power supply: 3 × 400 V * Rated machine power: 21 kVA * Maximum load current: 36 A * Machine dimensions: approx. 2.9 m length approx. 3.9 m with chip conveyor approx. 1.8 m width approx. 1.72 m height * Machine weight: approx. 4,500 kg Equipment: * Integrated Okuma robot * Automatic part feeding * Ideal for series and automated turned parts * Stable and durable design Particularly interesting for: * Series production * Unmanned production * Automated turned parts * Production expansion or export Loading and transport can be arranged. Price: Negotiable plus VAT. Location: Germany If interested, please contact us. All information is non-binding, subject to prior sale. Machines/machine parts are sold without warranty claims and remain our property until full payment.

Condition: used, Year of construction: 2013, turning diameter over cross slide: 300 mm, turning length: 1,000 mm, overall weight: 2,300 kg, 1 CNC flatbed lathe CK6150 max. turning diameter over bed 500 mm, with various turning tools, carbide insert drills, carbide inserts, chucks, collets, and a side table AREBOS Description CNC lathe CK6150 – max. turning diameter over bed Ø 500 mm, max. turning diameter over slide approx. Ø 250–300 mm, center distance depending on the model 1000 mm, spindle bore Ø 82 mm, spindle nose A2-8, spindle speed approx. 150–1500 rpm, bed width approx. 400 mm, main motor approx. 7.5 kW, tailstock MK5, weight depending on the model approx. 2.3 t Color: as shown in the pictures, according to the images and upon inspection Ncjdey Thhvopfx Aqvjt Year of manufacture: 2013 Machine number: SN: 220414 Dimensions L/W/H: 245 x 145 x 175 cm Weight in kg approx.: 2300 Condition: used

Condition: excellent (used), Year of construction: 1999, 1 Nakamura-Tome WT-250 CNC lathe with dual spindle and dual turret 4 axes Ncodoy Ta Iujpfx Aqvst Year 1999 CNC: Fanuc Series 18i-T Supplied with 8 tool positions And all tooling and tool holders 1 Iemca MASTER 880/38/P bar feeder

Condition: excellent (used), Year of construction: 1998, 1 Nakamura-Tome WT-250 CNC lathe with dual spindles and dual turrets 4 axes Year 1998 Ncedpfx Aqjy Ta Ihovjt CNC: Fanuc Series 18i-T Supplied with 5 tool stations And all tooling and tool holders 1 Iemca MASTER 880/38/P bar feeder

Condition: used, Year of construction: 1988, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1988, compliant with CE standards FANUC 10-T CNC control Flat guides ASA 5" Bar capacity: 42mm Maximum turning diameter over the bed: 450mm Maximum turning diameter: 250mm Maximum turning length: 400mm Maximum spindle power: 7.5Kw Weight approximately: 2,600 Kg Complete with: Hydraulic tool holder Tailstock 12-position automatic turret Presetting system Chip conveyor Ncsdpey S R E Ujfx Aqvst Bar feeder interface Part catcher

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 178979, turning length: 309 mm, turning diameter: 280 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, controller model: Mazatrol 640T Nexus, No reserve price – guaranteed sale to the highest bidder! The technical data is sourced from the manufacturer's information. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Max. turning diameter: 280 mm Max. machining length: 309 mm Swing diameter: 550 mm X-axis travel: 190 mm Z-axis travel: 330 mm Spindle bore: 61 mm Rapid traverses X/Z: 30/33 m/min MACHINE DETAILS Control: Mazatrol 640T Nexus Main power circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current: 31 A Main motor voltage: 400 V Rated power: 24 kVA Weight: 3,500 kg Nsdpfjy Sln Rex Aqvect Note: The bar feeder is not included in the offer.

Condition: good (used), Year of construction: 2002, functionality: fully functional, FOR SALE: DAEWOO Lynx 210L CNC Lathe Compact and robust machine, ideal for the production of precision components. Technical Specifications Control System: FANUC Series 21i-T. Turret: 12 tool stations. Clamping Device: Hydraulic 3-jaw chuck. Workpiece Support: Hydraulic tailstock included. Machining Dimensions (standard Lynx 210L): Max. turning diameter: ~280 mm. Max. turning length: ~500 mm. Njdpfxey Sgnfo Aqvect Manufacturer Data (Source: IMG_8345.jpeg) Model: Lynx 210L (Lynx 200 Series). Serial No.: L2002339. Total Weight: 4,240 kg.

Condition: used, Year of construction: 2012, Lathe fully functional. Nodpfx Aqoy R Rdnevoct

Condition: good (used), Year of construction: 2010, turning length: 650 mm, turning diameter: 400 mm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, ATTENTION: ONSITE SALE IN 74219 MÖCKMÜHL!!! CNC Turning & Milling Center Spinner TC600 52MC Year of manufacture: 2010 Control: Sinumerik 840D Spindle speed: 0–4,000 rpm Drive power: 34KW / 325Nm Chuck size: 210mm – SMW Autoblock Bar capacity: 52mm Travel: X-axis: 275mm Z-axis: 700mm Driven tool speed: 6,000 rpm Drive power: 12KW Tool holder: VDI 30 Number of turret stations: 16 NC tailstock as Z2 axis Accessories: Ncjdpjy N S Swjfx Aqvst - Chip conveyor - Renishaw manual tool measurement - Coolant system - Extensive accessories included

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 500 mm, turning diameter: 250 mm, spindle bore: 71 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,800 mm, total length: 4,000 mm, total width: 1,900 mm, overall weight: 5,000 kg, CNC Fanuc 18i - T CAPACITY: Max bar working diameter: mm 54 Max turning diameter (re-chucking): mm 250 Max turning length: mm 500 Max swing diameter: mm 520 MAIN SPINDLE: Speed range: rpm 40 – 4,000 Spindle nose: ASA 6’’ Spindle bore: mm 80 Chuck diameter: mm 250 Motor power: kW 11/15 (50%) SUB-SPINDLE: Speed range: rpm 40 – 4,000 Spindle nose: ASA 5’’ Spindle bore: mm 52 Chuck diameter: mm 165 Motor power: kW 5.5/7.5 (50%) BI-DIRECTIONAL TURRET: Number of stations: 12 Indexing time: sec 0.6 LIVE TOOLS: Number of stations: 6 Speed range: rpm 50 – 3,000 Motor power: kW 3.7 (50%) C AXIS: Type: CS (direct) Minimum programmable increment: 0.001° Max rapid speed: rpm 80 AXES: X axis travel: mm 210 + 5 Z axis travel: mm 500 + 10 B axis travel: mm 510 + 5 Rapid traverse X: m/min 20 Rapid traverse Z: m/min 20 Rapid traverse B: m/min 24 COOLANT: Tank capacity: L 200 Pump flow rate: L/min 100 DIMENSIONS: Overall dimensions with chip conveyor: mm 4,000x1,900x1,800 h Weight with chip conveyor: kg 5,000 Machine equipped with: • Drilling kit with B-axis sub-spindle operating simultaneously with turning • 9 bar pump • Part catcher L 150 mm • Monitoring system • Spindle bore mm 71 • Collet holder, simple cone 42 • Chuck diameter mm 165 Nodpfx Aqey I A Imevjct • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 5,000 rpm, quill diameter: 60 mm, quill stroke: 80 mm, ATTENTION: A total of 3 machines available. There are 2 additional identical machines with the same equipment (chip conveyor, etc.). EQUIPMENT - Chip conveyor for side mounting and chip bin - Short bar loader magazine - Interface for bar feeder device - Workpiece catch tray (parts catcher) - Chuck confirmation switch (open/close) - C-axis indexing - Driven tools - Programmable tailstock - Linear guides - Manuals Control: Fanuc 0i-TD Control power-on hours: 30,811 h Machining time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Milling spindle motor power: 3.7/2.2 kW Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm X-axis travel: 170 mm Z-axis travel: 335 mm Ncedpfjy Hrngex Aqvjt Rapid traverse X/Z-axis: 36 m/min Main spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity diameter: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper bore/tailstock mounting: MT 4 Milling Spindle Max. spindle speed: 5,000 rpm Bar feeder magazine Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Ncjdpfx Aqey Ex T Tjvjt Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Max. bar capacity main spindle: 61 mm Turning length: 490 mm Spindle speed main/sub spindle: 4700 / 6000 rpm 12-position turret with driven tools C-axis Y-axis Parts catcher Nodpfxsy Aympj Aqvect Workpiece ejector Chip conveyor Various tool holders

Condition: good (used), Year of construction: 2006, Parts shown by hand not come with machine. Njdpfx Aqoyzyhqjvect

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 330 mm, turning diameter: 229 mm, spindle bore: 47 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 138 mm, controller model: Fanuc GE 18i-T, Hardinge Conquest T42 CNC turning center (2000) Controller: GE Fanuc Series 18-T, live tooling, C-axis option noted, tailstock included, Ncedpfoyzbivsx Aqvjt 12-station turret, Spindle bore 47.6 mm, spindle speed 5,000 rpm, Max turning/machining diameter 229 mm, Max turning length 333 mm, X travel 138 mm, Z travel 350 mm.

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Ncjdpfx Ajyyxzmjqvot Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, turning diameter 320 mm turning length 600 mm control Fanuc Oi-TD spindle bore diameter 74 mm number of controlled axis 2 turning speed range 3000 U/min rapid speed 20 m/min number of tapers in turret head 12 direkt tail stock Ja power requirement 15 kW weight 5,0 t dimensions 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis Ncedpfoyxr Htjx Aqvst - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T spindle bore diameter 51 mm number of controlled axis 2 Nedpfx Aqsyxr Hgovect turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 tail stock Ja dimensions 3,9 x 1,6 x 2,1 m weight 4,0 t weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Njdpeyvy Utsfx Aqvect Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: excellent (used), Year of construction: 2022, Like-new condition; has not yet been used in production Control: CNC linear path control SIEMENS SINUMERIK 828 D TECHNICAL DATA Main Spindle Turning diameter 270 mm Turning length 291 mm Chuck diameter 210 mm Spindle bore 76 mm Max. drive power 10.5/20.0 kW Nsdpfx Aqsyrd Uhovsct C-axis (resolution) 0.001° Speed range up to 45-4,500 rpm Turret (Tool Carrier) Number of stations 12 Driven stations 12 Speed of driven tools 5,000 rpm Tool interface BMT 45 X-axis 175 mm Z-axis 350 mm Tailstock Quill diameter 65 mm Quill stroke 80 mm EQUIPMENT/ACCESSORIES  Hohlspannzylinder (hollow clamping cylinder) main spindle  C-axis main spindle  Tailstock  Turret drive unit  Coolant system  ICS = internal coolant supply 10 bar  Chip conveyor  Rinsing gun  Parts catcher  3-jaw chuck SAMCHULLY MH-208 BVI max. Ø 210 mm incl. set of clamping jaws  Documentation

Condition: used, Year of construction: 2001, turning diameter 290 mm turning length 850 mm swing diameter 600 mm control Siemens type 840 D mm spindle passage 103 mm turning speeds 3000 U/min live tooling 3000 U/min rapid travel - grinding spindle 25 m/min total power requirement 65 kW weight of the machine ca. 11 t Serial No. 1130.2011-30 Equipment: Main spindle / counter spindle 2 power chucks 2 tool turrets C-axis Cabin Chip conveyor Coolant system 22 bar Nodpfxsyqv Aue Aqvsct Offer price without tools Optional accessories available for purchase: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Ncjdpfxoyp Iduo Aqvst Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm 8-position turret Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 600 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Counter-spindle speed: 59–4,500 rpm Bar capacity main spindle: 65 mm Bar capacity counter-spindle: 51 mm Travel X1/X2 axis: 195 mm Travel Y axis: ± 41 mm Travel Z axis: 600 mm Max. workpiece diameter: 250 mm Max. turning length: 555 mm Number of tool stations upper turret: 12 Number of tool stations lower turret: 12 All tools driven Main spindle nose: A 2-6 Counter-spindle nose: A 2-5 Feed power X1/X2/Y axis: 1 kW Feed power Z1/Z2 axis: 2.1 kW Maximum loading length: 6,200 mm MACHINE DETAILS Control model: Fanuc 18 IT Main spindle power: 18.5 kW / 15 kW Counter-spindle power: 11 kW / 7.5 kW Bar feeder Max. bar length: 6 m 8 channels with diameters: 22 mm, 27 mm, 32 mm, 37 mm, 42 mm, 47 mm, 57 mm, 67 mm Nsdpfjynhihjx Aqvsct 8 pushers with pusher cone Intermediate sizes can also be loaded Unload magazine Max. bar length: 2 m EQUIPMENT Coolant tank Chip conveyor from 10/2021 Last overhaul of bar feeder 09/2020 (channel replacement, replacement of various bearings, replacement of push rods and spindle liners, including maintenance)