Mayerhofer Rimm Maschinenbau GmbH

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Dcsdpfx Aioz I Sbke Ssn Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Dcedpfx Aoz I R U Aji Sen Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm Dcsdjz Iyldopfx Ai Son • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Dcodpfx Aoz Iq Iisi Ssn Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of construction: 1999 Dsdpfez Iq Hfsx Ai Sjcn Injection unit: Screw diameter: 35mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - clean production conditions Euromap 12 Robot interface Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Dcodpfxjz Iq E Uj Ai Sen Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 with the sprue picker anvil+long leg Year of construction: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control system with air valve Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Dcedpfx Aez Iq Enoi Sen Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 320K 700-100 Year of construction: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Distance between tie bars: 320x320 mm Size of the clamping platens: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - bimetal Central lubrication Original Arburg mold crane, 2 lifting speeds, lifting capacity 100 kg Dimensions: Weight: 2170 kg Length/width/height: 2.94x1.45x1.99 m Drive: Pump/motor: 11 kW Heating output: 4.9 kW Total output: 15.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Dcjdpfx Aoz Iq Dkoi Sen Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Dcedpjz Iq Ddsfx Ai Sjn Price: Upon request

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 Dedpfx Aijz Iq A Tj Secn injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Dcedpfsz Iq Agox Ai Sen

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker Dcsdpfjz Iqz Nsx Ai Son - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Arburg 320C 500-170 e² / Hybrid Machine Year of manufacture: 2014 Dcodpez Iqzvsfx Ai Son Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air valve x 2 Core pull control Controller with 8 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor with inverter – energy-saving Proportional valve on the injection unit – for precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 320S 500-60 Year of manufacture: 2003 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA Additional Equipment: Euromap 12 Robot interface Air valve x 1 Controller with 6 hot runner zones Hardened injection unit - bimetallic Dimensions: Weight: 2,350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pump/Motor: 11 kW Heating capacity: 4 kW Dcjdpfx Aiez Iqyxo Sen Total power: 15 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-100 / Excellent technical condition Year of construction: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Injection pressure: 2000 bar Metering volume: 49 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition and was used for testing injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from the Sensor Kistler brand - mold pressure measurement It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Dimensions Weight: 2300 kg Length/width/height: 3.18x1.47x1.99 m Drive: Pump/motor: 15 kW Dcjdpfx Aez Iqyrsi Sen Heating output: 4.9 kW Total output: 19.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Dcsdpez Iqyfofx Ai Sen Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 320A 500-170 with the sprue picker / electric machine Year of manufacture: 2005 Injection unit: Screw diameter: 35 mm injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit : clamping force: 50 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: electric clamping unit: toggle lever Control system: SELOGICA Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface injection unit hardened - bimetal Central lubrication Djdpfjz Iqxhox Ai Sjcn Machine with the built-in conveyor belt Arburg and original sorting flap Dimensions: Weight: 3500 kg Length/width/height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating power: 5,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Djdpfx Aez Iqxbji Sjcn Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Arburg 270C 400-70 Year of manufacture: 11.2015 Injection unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Dedpfx Aisz Iqwqe Socn Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/width/height: 3.18x1.43x1.98 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Dcjdpfxjz Iqvme Ai Sjn Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Hot runner control Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Screw diameter change possible Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Dcsdjz Iqvaspfx Ai Son

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Dcodpfx Aez Iquvsi Ssn Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Dcedpfx Aioz Iqt Eo Sjn Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Dsdpsz Iqruofx Ai Secn Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Dodpfxjz Iqqqj Ai Sjcn Price: Upon request