FMT-Fertigungstechnik e. K.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomi SHI Demag FI-Exis SP 1000-6300 Redpfx Aajygk Eiezon

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8040-0008, Plastic Injection Moulding Machine | Demag Ergotech - Systec 280/630-840 (2800-840) Clamping Force [kN]: 2,800 Number of components: 1 Clamping platen width [mm]: 950 Clamping platen height [mm]: 950 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centering ring diameter [mm]: 160 Minimum mould height [mm]: 330 Rodpeygidwsfx Aazen Maximum mould height [mm]: 710 Maximum daylight opening [mm]: 675 Maximum ejector stroke [mm]: 200 Thread [M]: 20 Maximum mould weight [kg]: 3,700 Maximum mould weight, moving platen [kg]: 2,500 Screw diameter [mm]: EE1: 45 Max. shot weight [g] PS: EE1: 320 Injection unit arrangement: EE1: horizontal Equipment: 2-core pull, 6-fold cascade, with robot Inspection possible at any time by prior arrangement. Free loaded on truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGErgotech | Ergotec | Ergotech280

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Redpfeygib Nex Aazsn Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Rodjygiafopfx Aazsn Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: SYNERGY S-1750-460 Baujahr: 2004 Rodpoygdgmsfx Aazsn Schließkraft: 175 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 400 - 700 mm Öffnungsweg: 450 mm Schnecken DN: 50 mm Max. Hubvolumen: 314 cm³ Spritzteilgewicht in PS: 301 g 2 x Kernzug Schnittstelle Roboter Die Maschine wird ohne den abgebildeten SEPRO Roboter verkauft. Der SEPRO Roboter auf den Bildern ist nicht im Lieferumfang enthalten.

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery dealership. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Advantage for Used Machinery Starting from 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as with new equipment. Keyword: Growth Booster (§ 7 Sec. 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower, 2-Color/2-Component Machine Control System: MC6 Year of Manufacture: 2014 Machine No.: 61020507 Operating Hours: 47,137 h 1st Injection Unit: 750 horizontal Injection unit/screw diameter: 50 mm Shot volume: 393 ccm Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit: 180 vertical Injection unit/screw diameter: 30 mm Shot volume: 85 ccm Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max platen spacing: 900 mm Min. installation height of mould: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Weight: 9,000 kg Extras Nozzle side: Needle shut-off A+C; 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Cooling water BGS with 6 circuits each on nozzle and ejector sides BluePower Technology: up to 40% energy savings Redpsyf Uy Uofx Aazjn The machine has been very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: free loaded onto buyer's truck, or free delivered to site against reimbursement of freight costs. Further information about the machines we offer and our company: - All machines we sell are purchased from ongoing production for our own stock in Hannover. - Every machine is inspected and tested before dismantling. - We do NOT deal in insolvency assets, nor do we act as brokers dealing with third-party goods. - All machines come from successful enterprises where regular maintenance and servicing are the standard. - All machines offered can be inspected at our warehouse.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s Rodpoyf H Nnjfx Aazon • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm Rodpfjyf Htyex Aazjn • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Rodpfx Aaeyf Hfpozsn Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Rsdjyf Ha Hspfx Aazjn Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: ready for operation (used), Year of construction: 2006, operating hours: 98,495 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, displacement volume: 74 cm³, injection pressure: 2,500 bar, injection weight: 59 g, mold height (min.): 200 mm, ejector force: 22,600 N, ejector stroke: 100 mm, opening stroke: 600 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,910 mm, overall weight: 3,000 kg, heating capacity: 8.12 kW (11.04 HP), pump power: 11,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, We offer this used KraussMaffei 50-180 CX injection moulding machine, year 2006. KM Model: 50-180 CX International KM size designation: 180 CX/50 Year of manufacture: 2006 Machine serial number: 61009011 Machine weight: 3,000 kg Condition: ready for operation (used) Pump operating hours: 98,495 Automatic cycle hours: 83,046 Description: Screw diameter: 25 mm Clamping force: 500 kN Shot volume: 74 cm³ Maximum injection pressure: 2,500 bar Shot weight: 59 g Minimum mould height: 200 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 600 mm Tie bar spacing: 370 mm Location ring, injection side: Ø125 mm Location ring, ejector side: Ø125 mm Ejector force (forward/backward): 22.6 kN / 9.9 kN Ejector stroke: 100 mm Machine dimensions (LxWxH): 3,500 x 1,400 x 1,910 mm Machine weight: 3,000 kg Rjdpfxsyf E Dqj Aazon Heating capacity: 8.12 kW Pump motor power: 11 kW Power supply: 400V, 50Hz, standard industrial three-phase connection Equipment: documentation included If you have any additional questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,02,060 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, injection pressure: 2,429 bar, mold height (min.): 300 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,240 mm, total width: 1,510 mm, total height: 2,180 mm, overall weight: 7,800 kg, heating capacity: 10.97 kW (14.92 HP), pump power: 18,500 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, We are offering this used KraussMaffei 100-380 CX injection moulding machine, year of manufacture 2006. Injection moulding machine: KM 100-380 CX International size designation: KM 380 CX/100 Year of manufacture: 2006 Serial number: 61009013 Machine weight: 7,800 kg Condition: ready for operation (used) Pump operating hours: 102,060 Automatic mode operating hours: 87,744 Specification: Screw diameter: 35 mm Clamping force: 1,000 kN Injection volume: 154 ccm Maximum injection pressure: 2,429 bar Shot weight: 59 ccm Minimum mould height: 300 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 900 mm Distance between tie bars: 420 mm Locating ring, injection side: Ø125 mm Locating ring, ejector side: Ø125 mm Ejector force forward/backward: 22.6/9.9 kN Ejector stroke: 150 mm Machine dimensions (LxWxH): 4,240 x 1,510 x 2,180 mm Machine weight: 7,800 kg Heater capacity: 10.97 kW Pump motor power: 18.5 kW Redpfx Aajyf E Amozsn Input supply: 400V, 50Hz standard industrial three-phase Equipment: documentation included If you have any additional questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2025, KraussMaffei Injection Moulding Machine KM 320-2000 PA CN Year of manufacture: 2025 Machine equipped with a five-point, double toggle lever clamping unit (three-platen system) with a servo-electric drive. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing system Complete system for thermoplastics. Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar spacing (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Daylight: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Rjdpfx Aaeyft Nzezjn Installed heater capacity: 29.2 kW Number of heating zones (cylinder): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight incl. control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.

Condition: used, Year of construction: 2017, operating hours: 35,502 h, functionality: limited functionality, machine/vehicle number: 1207Q036, clamping force: 4,000 kN, screw diameter: 80 mm, clearance between the columns: 700 mm, displacement volume: 2,010 cm³, injection pressure: 162 bar, injection weight: 1,890 g, mold height (min.): 245 mm, ejector force: 1,11,000 N, ejector stroke: 205 mm, opening stroke: 655 mm, total length: 7,700 mm, total width: 1,950 mm, total height: 2,240 mm, overall weight: 15,500 kg, heating capacity: 24.5 kW (33.31 HP), pump power: 37,000 W, Equipment: documentation/manual, 400 Tonne Borche machine less than 10 years old. General good condition with some small wear on a couple of toggle pins. Report on machine status and video of the machine running available on request. Rodpfx Aasyftl Ajzen

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,646 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It features a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine includes a linear robot system and a 9-zone hot runner mold temperature control. Consider the opportunity to buy this DEMAG El Exis S250/630-2300 electrical injection moulding machine. Contact us for more information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 950 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Max daylight (open distance): 1505 mm • Opening stroke: 675 mm • Ejector: 200 mm stroke / 80 kN force • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) Redpfoyftamox Aazen • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating power: 14.8 kW • Hybrid drive power consumption: • Total installed power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Valve gate control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9‑zone hot runner integrated • Interfaces: Printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle: 2.00 s • Noise level: 74 dB(A) • Note from owner • Describes a hybrid high-speed machine with a larger injection unit (Type 2300 vs Type 840) than the referenced inventory machine above. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm Rodpfx Ajyfrb Neazjn • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm Rjdpfx Aasyfq Alezjn • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: excellent (used), Year of construction: 2004, clamping force: 1,250 kN, screw diameter: 45 mm, displacement volume: 275 cm³, injection pressure: 1,878 bar, injection weight: 250 g, mold height (min.): 300 mm, Krauss Maffei 125-520 C2 Rjdpeyfntusfx Aazsn General Information Model: 125-520 C2 Year of manufacture: 2004 Control system: MC4 Machine weight: 6,000 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping Unit Clamping force: 125 t Clamping system: 125 / … Platen size: 745 × 770 mm Tie bar spacing: 470 × 470 mm Opening stroke: 600 mm Max. platen distance: 900 mm Mold height: 300 mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit Injection unit: … / 520 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 275 ccm Shot weight: 250 g Specific injection pressure: 1,878 bar

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Rodpjyfnpvofx Aazjn Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130t Year of manufacture: 2008 Injection weight: 475.9g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Injection weight: 475.9 g Clamping force: 130 t Tool plate dimensions: 745 x 745 mm Distance between tie bars: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Maximum platen distance: 900 mm Weight: 8000 kg Year of manufacture: 2008 Control system: MC5 Equipment: - Accumulator - Euromap 67 interface - 2 x pneumatic valves - Hydraulic core on moving platen Rsdpsyfnghofx Aazen

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm Rodpfx Ajyfm Ahsazen 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Electric Hours: 34535 Rodpfsyfh Ulox Aazen Available 3 units (2020-2019)

Condition: excellent (used), Year of construction: 2020, clamping force: 300 kN, Clamping force: 300 t Screw diameter: 60 mm Distance between tie bars V: 720 mm Rjdpfxsyfh Rmj Aazon Distance between tie bars H: 720 mm Type: Horizontal Drive: Hybrid Hours: 23000

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Rodpfx Aeyff S Uoazen Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Operating hours: 36,061 Stunden Screw: 40 HVF mm Injection pressure: 2000 bar Rodpfx Ajyff S Isazon Stroke volume: 201 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz