B&N Maschinenhandel GmbH

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Fanuc control, milling spindle, turret, sub-spindle, chip conveyor, Blum probe, robot, short bar loader, toolholder package Kodpfxoya I D Ns Adwjdg

Condition: used, Hurco Hawk Model 5D, with Dynapath Delta CNC control, 70-3800 RPM, 1000mm x 330mm table. Bt 40 Spindle. Immaculate condition from University. Kjdpfxeya Hrrs Adwodg

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Max. swing diameter: 750 mm Max. machining diameter: 420 mm Max. machining length: 1,539 mm Max. milling speed: 4,500 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 102 mm Machine equipped with: - CNC CONTROL Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-212, diameter 304 mm Kdodpfxjya Du Rs Adwog - Tool Eye - C-axis - Y-axis - NC tailstock - Hydraulic SMW steady rest - Main spindle with 102 mm bar capacity - Reinforced coolant pump - Chip conveyor, side discharge - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2011, Takisawa TMM 250 M3, year of manufacture 2011, Fanuc 160 is TB control, main spindle bar capacity up to 76 mm, sub spindle bar capacity up to 51 mm, 15-position turret, driven tools, C axis, sub spindle, max. turning length 1,230 mm, high-pressure coolant 8 bar, milling spindle B axis with Capto C6, 60-position Capto tool magazine, B axis swiveling +/- 115°, B axis clamping in 1° increments, B axis 7.5 kW / 8,000 rpm, Y axis +/- 130 mm. B axis overhaul in 2024 for €20,000. Kdsdpfx Adoyazwpewsg

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (min.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Ksdpfx Adeyazdpswedg Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: like new (used), Year of construction: 2008, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: 20,000 - 25,000 euros. * Year: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Subspindle. * 12-station turret, all positions driven. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Subspindle integrated motor: 15 kW. * Direct drive motor for driven tools: 5.5 kW. * Motor starting torque: 640 Nm. Kdjdjyaxmuepfx Adwog * Beltless and gearless motors. * Main spindle nose size: A2-8. * Subspindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Subspindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Driven tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. * Conversational automatic programming system: Mapps 4. * Automatic load control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret index change time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS-232. * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening/closing of main and subspindle chucks. * Side-mounted hinge-type chip conveyor. * Extensive set of static and driven tool holders. * Electrical transformer. * Documentation included: parts list, electrical schematics, programming and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * Precision videos must be checked. * Only used for prototyping AOG aeronautical components in aluminum. * Immediate delivery unless sold prior.

Condition: used, Year of construction: 2002, x-travel 750 mm Kdjdjyatyispfx Adwsg y-travel 500 mm z-travel 400 mm spindle taper ISO 40 spindle speed: 20-8000 1/min rapid travel x/y/z 25.000 mm/min feed range 1-5000 mm/min Size of table plate 1000 x 500 mm tool change unit 20 Control Heidenhain TNC 530 Number of working hours 25754 h table load 400 kg workpiece length 300 mm total power requirement 7,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 2,3 x 2,6 x 2,56 m WEMAS VZ 750 machining centre, 3 axes, 4th axis prepared Good condition, few operating hours, only samples and prototypes, mainly aluminium. Control system 30,397 hours Machine 25,754 hours Programme run 8,683 hours

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,500 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 1,550 mm, total height: 3,200 mm, overall weight: 22,000 kg, controller manufacturer: FANUC, controller model: 16i-TA, number of axes: 9, This 9-axis Nakamura-Tome STW-40 was manufactured in 2000, featuring a max. turning diameter of 570 mm and a turning length up to 1550 mm. It boasts spindle speeds up to 3500 rpm and rapid traverse rates of 25 m/min on X-axes and 30 m/min on Z-axes. Ideal for complex machining tasks, it includes a 80-fold WZG magazine and a hinged belt chip conveyor. Contact us for more information about this machine. Additional equipment • 12000 rpm for upper WZG spindle with 11/7.5 kW drive power and 79/47 Nm torque • 80-fold WZG magazine • Automatic start-up and shut-down of the machine with warm-up program function • WZG breakage control with scanning flag for upper WZG spindle • 2 HD - Brinkmann pumps for upper WZG spindle and lower turret (pump capacity = 45 liters per minute) • Hinged belt chip conveyor with ejection to the right Machine Benefits Technical Machine Benefits • Max turning diameter upper wzg spindle: 570 mm // max turning diameter turret lower left and right: 400 mm • Standard turning diameter: 300 mm • Max turning length turret-bottom left and right: 500 mm • Max turning length upper wzg spindle: 1550 mm • Distance between spindle noses: 1900 mm • Distance between 2 3-jaw chucks: 1500 mm • Power requirement: total connected load of 160 kva • Air consumption: approximately 500 liters per minute • C1 + c2: 400 rpm • B-axis: 12. 5 r/min Extra Information Left / Right spindle: Driving power and torque: 22/15 kW Torque: 500/794 Nm Spindle speed: 30-3500 rpm Kedpfx Adeyaqpuewedg Spindle nose: A1-8 Inside diameter in front bearing: 130 mm Spindle bore: 85 mm Max bar capacity: 71 mm Max chuck size: 315 mm C - Axis 3 axes simultaneous: X, Z, C Switch-on time: 0.5 sec Rapid traverse speed: 400 rpm (144000 °/min) Feed rate: 1 - 4800 °/min Graduation accuracy: 0.011° (30 angular sec) Repeatability: ± 0.006° (± 20 angular sec) Spindle disk brake torque: 25 kgfm Milling and Bphr drive for upper WZG spindle: CAPTO-C6 Drive power: 15/11 kW from 800 rpm Motor speed: 60 to 6000 rpm Torque: WeldonS, 10, 12, 14, 16, 20, 25 Clamping fixtures attached tools: ER-25/ER-32 collet chuck Dimensions Machine Depth 6200 mm

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 Kdsdpjyaqgysfx Adweg - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations Kdjdpfxsyaqczo Adwsg - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,695 h, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm and a turning spindle speed of 2800rpm. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex 400 IV machine we have for sale. Contact us for more information about this machine. Additional equipment • Options Screen: Picture available Machine Benefits Technical Machine Benefits • Power on: 40373 hours /cutting hours: 20695 hours Ksdpjyap Ucofx Adwsdg • Chuck size: 12 inches / steady rest: 70-230 mm slu 3. 1-zs • Milling spindle speed: 12000 rpm / turning spindle speed: 2800 rpm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Kdodpeyap Shsfx Adweg Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: good (used), Year of construction: 2023, Spinner TC 600, year 2023, Fanuc 32 i TB control, X/Z travel 275/700 mm, chip conveyor, tailstock, 16-position turret, VDI 40, C-axis, driven tools, 3-jaw chuck Ø 250 mm. Kedpfx Adeyap H Sewjdg

Condition: good (used), Year of construction: 2008, Spinner TC 65, year of manufacture 2008, control Fanuc 21 iTB, travel X/Z 230/740 mm, tailstock, quill stroke 120 mm, spindle speed up to 4,500 rpm, 12-position turret, all stations driven, C axis, VDI 30, tailstock, three-jaw chuck, bar capacity up to 65 mm. Ksdpfoyapziex Adwodg

Condition: good (used), Year of construction: 2005, Spinner Tc 65 MC, year of manufacture 2005, Fanuc control, X/Z travel 230/740 mm, 12-position turret, C axis, driven tools, tailstock, chip conveyor, parts catcher, postprocessor, tool measuring arm. Kjdpeyapitsfx Adwjdg

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW Kdedpfx Aoyam D Uedwsg - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6" hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • There are 2 units available Technical Machine Benefits Kedpfx Adjyalpijwodg • Chuck type: 6" hydraulic chuck with bar capacity max /spindle speed: 4000 rpm max /power: 30 kw / 22 kw continuous/ max torque: 500 nm /spindle nose: a2-8/ acceleration time: 5. 1 seconds • Type: 6" hydraulic chuck max speed: 4000 rpm max power: 26 kw / 22 kw continuous /max torque: 724 nm /spindle nose: a2-8 /acceleration time: 2. 7 seconds • Max speed: up to 20000 rpm (optional) /max power: 18. 5 kw/ max torque: 119 nm/ taper type: km63, capto c6, bt40 • X-axis: 410 mm/ y-axis: ±70 mm (total 140 mm) /z-axis: 805 mm/ b-axis (milling head): 210° rotation/ c-axis (spindle): 0. 0001° resolution (full contouring) • Max turning diameter: approx. ø545 mm/ max turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 /changer type: high-speed cam-driven system • Heavy-duty construction with linear guides “done in one” multi-tasking concept for single-setup machining/ cnc control: mazatrol matrix with 3d simulation/ intelligent thermal shield for automatic thermal compensation

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 26,000 W, travel distance X-axis: 100 mm, overall weight: 6,900 kg, controller manufacturer: FANUC, controller model: FANUC 18i-TB, number of axes: 8, This 8-axis Biglia B470 YSM was manufactured in 2007. A robust turn-mill centre featuring dual spindles, each with significant power (main spindle 26 kW, sub-spindle 11 kW), and a maximum spindle speed of 3200 RPM. It includes a FANUC 18i-TB control unit, two 12-position live-tool capable turrets, and a bar feeder for enhanced productivity. If you are looking to get high-quality turning capabilities consider the Biglia B470 YSM machine we have for sale. Contact us for more information. Additional equipment • Chip Conveyor: Yes (belt type) • Part Catcher + Exit Conveyor: Yes • Bar Feeder: Iemca Master 880 MP 33L (Year 2019) Machine Benefits Technical Machine Benefits • Max. Turning length: 320 mm • Max. Turning diameter: 240 mm • Max. Bar capacity: 80 mm • Turrets: 2 × 12-position, all live-tool capable • Tool size: 20×20 mm (turning), Ø32 mm (boring) • Live tool speed: 4000 rpm • Live tool motor power: 3. 7 kw Extra Information Ksdpfx Adoyalmnswjdg Machine still under power

Condition: good (used), Year of construction: 1990, Johnford 5 VH Milling machine by Johnford with Fagor digital readout, year of manufacture 1990, in good condition CE-compliant!! Technical data: Year of manufacture: 1990 Working area Table clamping surface: 1370 mm x 250 mm Maximum table load: 350 kg Travel distances X-axis travel: 800 mm Y-axis travel: 390 mm Z-axis travel: 380 mm Vertical milling head Spindle speed (vertical): 70 rpm - 3600 rpm Ksdpfx Ajyalc Aedwjdg Spindle taper: SK40 DIN 2080 Quill stroke: 127 mm Feed Quill feeds (3): 0.04; 0.08; 0.15 mm/rev Drive power Main drive motor output: 3.75 kW Dimensions and weights Dimensions (L x W x H): 2.54 m x 2.16 m x 2.24 m Weight: 1590 kg About the machine: This versatile universal milling machine combines all the advantages of the world’s best-selling milling machine with additional stability. Belonging to the category of conventional milling machines, it stands out as the top model of the 5 VH series with an SK 40 tool taper and a 30% higher net weight. Both the X and Y axes are equipped with infinitely variable feed units. The swiveling vertical milling head offers a wide speed range for machining steel and non-ferrous metals. Further features include a four-stage automatic quill feed, pneumatic tool clamping, and a large table for workpieces and clamping devices. Further milling machines from well-known manufacturers can be found on our website.

Condition: ready for operation (used), Year of construction: 2000, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Kdodpfx Adsyailzewog Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, total height: 2,600 mm, overall weight: 7,800 kg, controller manufacturer: SIEMENS, controller model: CELOS with Siemens 840D sl Operate, number of axes: 3, This 3-axis DMG MORI CTX 2500/1250 Horizontal turning machine was manufactured in 2018. Ideal for complex machining tasks, it combines turning and milling capabilities in one machine. Consider the opportunity to buy this DMG MORI CTX 2500/1250 Horizontal turning machine. Contact us for more information. Additional equipment • Counter spindle turnMASTER 6 inch, ISM 36, Y-axis / C-axis and spindle brake (hydr.) / Reinforced coolant pump (5 - 20 bar) / Hinged belt chip conveyor / Tool measuring device in the work area (automatic, Ø 315 mm) / 12-station star turret, VDI 40 with quick-change system (TRIFIX) / Tool revolver completely replaced in December 2024 / Machine comes without chuck • Turret: Number of tool stations: 12 / Number of driven tool stations: 12 / Max. speed: up to 6000 rpm /Max. power (100% ED): 10 kW • Shank diameter according to DIN 69880: 40 mm • Off-center turning and milling / Milling of gearing using the hobbing process / Alternating speed technology cycle / Polygon turning (machining of elliptical and polygonal shapes) / Program status control / Gear skiving (technology cycle for gears) / Multi-thread cycle 2.0 (position-oriented threads) / Easy Tool Monitor 2.0 (tool monitoring system) / Energy meter for Siemens 840D sl OP CELOS / Hydraulic hollow clamping device Ø77 mm Machine Benefits Technical Machine Benefits • Torque (100% ed): 410 nm / max. Torque (40% ed): 525 nm • Circumferential diameter above bed: 710 mm / face travel: 260 mm / longitudinal stroke: 1345 mm • Max. Chuck diameter: 315 mm Dimensions Machine Depth 5400 mm Kdedpfx Aoyailusdwog

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 401932 in 401950, spindle bore: 42 mm, bar passage: 42 mm, For sale: 2 INDEX ABC 42 machining centers, year 2004, each equipped with an FMB automatic bar feeder. The lathes feature two turrets (both with live tooling) and a counter-spindle. Spindle bore diameter: Ø42 mm. Both machines are additionally equipped with powered secondary finishing tools. The machines come with a large amount of extra equipment. Both machines have been regularly maintained and are in very good condition. One machine has a completely overhauled synchronous spindle – the price for this unit is €30,000. The price for the second unit is €25,000. Kdsdpfx Adeyahixjwog If both are purchased together, the total price is €50,000.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: R7A V09, spindle bore: 65 mm, bar passage: 65 mm, For sale: two CNC machining centers EMCO HYPERTURN 665, year 2005, complete with bar feeder. Lathes equipped with two turrets (both with driven tools) and counter spindle. Spindle bore Ø65 mm. Includes a large amount of additional equipment (tool heads, driven tools, etc.). Machines have been regularly maintained and are in good condition. Kdedpfoyahiljx Adwog Price of machine with FMB bar feeder: €23,000. Price of machine with Hydrobar bar feeder: €20,000. If both are purchased together, the total price is €40,000.

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm Ksdpoyab Egofx Adwodg 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Gantry loading system LG-10AI

Condition: like new (used), Year of construction: 2019, operating hours: 1,550 h, functionality: fully functional, With the EMCO short bar loader SL 1200, EMCO offers the perfect solution for the automatic feeding and reloading of pre-cut bars up to a maximum bar length of 1200 mm. The advantage: small footprint and short loading times due to reduced stroke lengths. The control system is perfectly adapted to the machine interface. - Automatic feeding and reloading of pre-cut bars - Maximum bar length: 1200 mm - Compact design for minimal footprint - Short loading times thanks to shorter strokes Kdodpeyabuzofx Adwsg - Control system perfectly matched to the machine interface Technical features / specifications: - Product type: short bar loader - Model: SL 1200 - Manufacturer: EMCO - Maximum bar length: 1200 mm