Unitu S.r.o.

Condition: excellent (used), Year of construction: 2016, DR.BOY 55 A DUROPLAST (7.278 h) (S&P 3725) Year: 2016 Operating hours: 7.278 h Screw: 32 Duroplast mm Injection pressure: 2127 bar Injection volume: 96 ccm Clamping force: 55 t Tiebare distance: 360 x 335 mm Mouldheight: 250 mm Daylight max.: 650 mm Size: 3200 x 1200 x 2000 mm Kodpfx Aexqfzfeabonc Weight: 2430 kg Power: 11 kW Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2017, ARBURG A 1500 T 1600-170 Drehtisch (28.900 h) (S&P 3780) Manufacture year: 2017 Operating hours: 28,900 Stunden Screw: 30 mm Knjdpsxqfy Ijfx Aabsc Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 160 t Tie bar distance: 1500 Tischdurchmesser mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 2100 x 2400 mm Eeight: 11350 kg Connected load: 18,5 + 9,4 = 27,9 kW 2 station rotary table, 4 x corepuller, 1 x airvalve, 9 x hotrunner etc...price when new approx. 250.000,- Euro price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Knsdpfx Aexqfi Ajaboc Type : horizontal Drive : hydraulic Hours : 138000 h

Condition: good (used), Year of construction: 1998, Arburg 420 C 800-250 Clamping force : 80 t Screw diameter : 30 mm Knjdpfxjxqd Tmj Aabec Distance between tie bars : 420 x 420

Condition: good (used), Year of construction: 2001, Arburg 320 C 600-250 Kedpfx Aexqd Sveabsnc Clamping force: 60 t Screw diameter: 35 mm Shot weight: 100 g Distance between tie bars V: 320mm Distance between tie bars H: 320 mm Type: Horizontal Drive: Hydraulic Working hours : 10500 h

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: Knedpexqd Iwsfx Aabjc - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Knjdsxqdxijpfx Aabjc Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 75 g Clamping force: 500 kN Knjdpoxqdtaefx Aabec Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg

Condition: excellent (used), operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts Knodpfxexqc Hfs Aaboc interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, warehouse no.: 503615 manufacturer: ARBURG type: Allrounder 375 V 500-170 controller: Selogica-direkt year of construction: 2013 operation hours: 36163 h clamping force: 500 kN min. mould height: 200 mm max. mould height: 550 mm Knedjxqc A Tjpfx Aabec max. open daylight: 302 mm opening stroke: 225 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2500 bar equipment included: screen text german rotary table Anti vibration mounts measures of machine l x w x h: 2.524m x 1.48m x 3.53m total weight: 3111KG

Condition: good (used), Year of construction: 2013, operating hours: 32,768 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, clearance between the columns: 635 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, Equipment: documentation/manual, warehouse no.: 503581 manufacturer: BOY type: 90 E controller: Procan ALPHA 2 year of construction: 2013 operation hours: 32768 h clamping force: 900 kN Kjdpfx Aaexqc Ayebenc distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german screen text english screen text french Screentext Multi-Language Screen text Spanish Anti vibration mounts interface for ethernet interface robot EUROMAP 67 interface RS 232 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: new, Year of construction: 2023, Fanuc ROBOSHOT α-S30iB (2023) Knsdpfsxqaidex Aabec Model: FANUC ROBOSHOT α-S30iB Clamping Force: 300 kN Max. / Min. Mold Height: 330 mm / 150 mm Tie Bar Distance (HxV): 310 x 290 mm Platen Diameter: Ø 100 mm Injection Speed: 600 mm/s Screw Diameter: Φ16 mm Screw Volume: 11 ccm Resin Compatibility: Glass fiber content up to 30% Machine Type: Fully Electric Injection Molding Machine

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Knsdsxpyt Hspfx Aabec Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2000, operating hours: 31,843 h, General Data Machine weight 11000 Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 350 y This Krauss Maffei 350-2700 C2 was manufactured in 2000. It's a hydraulic injection moulding machine with a clamping force of 350 tons and a screw diameter of 80 mm. It features a new control system from 2018. Despite some wear, consider the opportunity to buy this Krauss Maffei 350-2700 C2 hydraulic injection moulding machine. Contact us for more information. Knedpfxexpywro Aabsc Application Types Injection Moulding

Condition: used, Year of construction: 2024, as-new injection moulding machine from Dr Boy 50 E, year 2024, with only 2 operating hours Knedjxpuauepfx Aabec

Condition: good (used), Year of construction: 2008, operating hours: 49,673 h, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, displacement volume: 154 cm³, injection pressure: 2.429 bar, ejector force: 22,000 N, ejector stroke: 100 mm, plate length: 740 mm, plate width: 640 mm, installation height: 300 mm, total length: 5,350 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 6,500 kg, type of input current: three-phase, input frequency: 50 Hz, clear span: 790 mm, Equipment: documentation/manual, warehouse no.: 503232 manufacturer: KRAUSS MAFFEI type: KM 80-380 EX controller: MC5 year of construction: 2008 operation hours: 49673 h Knedpfoxpt Nhox Aabec clamping force: 800 kN distance between tie-bars h x v: 520 x 420 mm size of mould plates h x v: 640 x 740 mm min. mould height: 300 mm max. open daylight: 790 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 2429 bar equipment included screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB Schuko-socket 10A mould heating 24x measures of machine l x w x h: 5.35m x 1.7m x 2m total weight: 6500KG

Condition: excellent (used), Year of construction: 2015, operating hours: 35,900 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 24 mm, clearance between the columns: 280 mm, Type BOY 35E ALPHA 2 Year of manufacture 2015 Operating hours 35,900 hours Screw diameter 24 mm HRW Max. injection pressure 2,231 bar Max. shot volume 41 cm³ Clamping force 35 t Max. tie bar distance 280 x 254 mm Minimum mould height 200 mm Max. distance between platens 500 mm Dimensions 2,300 x 800 x 1,700 mm (L x W x H) Weight 1,300 kg Equipment • Procan ALPHA 2 Kjdpfx Aajxphrdebenc • Pneumatic air valve • Euromap 67 • Individual air program • Econ plasticizing unit

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 5850 kg Control Unit Brand ENGEL Model n/a Injection Unit Screw diameter 18 mm Stroke volume 25 cm³ Injection pressure 2200 bar Knedpoxnd Rgefx Aabec Plasticising rate max 36 cm³/s Screw speed 450 r/min Nozzle pressure 28.3 kN Clamping Unit Clamping force 400 kN Opening stroke 338 mm Ejector force for / back 20.1 kN Media Pump drive power 15 kW This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Kedjxl Tz Aepfx Aabonc

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Knedjxl Tzcopfx Aabsc Immediately available!

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Knsdpfx Ajxl Tp Tjaboc Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 2000 Knodpfjxl H D Djx Aabsc Control Unit Brand FANUC Injection Unit Screw diameter 22 mm Clamping Unit Clamping force 300 kn Opening stroke 230 mm Distance between bars 310 × 290 mm Size of mold platens 440 x 420 mm This FANUC Roboshot alpha-i30B was manufactured in 2023. It features a clamping force of 300 KN, a screw diameter of 22 mm, and a maximum injection speed of 600 mm/s. Ideal for precision in electrical injection moulding, it offers a compact platen size of 440x420 mm and efficient energy consumption. If you are looking to get high-quality moulding capabilities, consider the FANUC Roboshot alpha-i30B machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Screw diameter: 25 mm Knedpfexl Hpgjx Aabsc Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2002, operating hours: 70,000 h, Control Unit Brand KRAUSS MAFFEI Main Drive Number of axis 3 Injection Unit Screw diameter 90 mm Injection pressure 1742 bar Clamping Unit Clamping force 800 kN Additional Equipment Hydraulic pulley: 4 Case service: 5x hydraulic, 8x pneumatic Robot type: Remak RD30CNC Crane runway: 50000 kN Distance from crane to boom with chain: > 2150 mm This 3-axis Krauss Maffei 800-5000MC4 was manufactured in 2002. It features a clamping force of 800 kN, a screw diameter of 90 mm, and a maximum shot volume of 2863 cc. The machine includes a Remak RD30CNC robot and supports a crane runway capacity of 50,000 kN. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 800-5000MC4 machine we have for sale. Contact us for more information. Ksdpfjxlu Uqjx Aabsnc Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand FANUC Injection Unit Screw diameter 52 mm Clamping Unit Clamping force 350 This FANUC Roboshot S300iA was manufactured in 2018. It features a clamping force of 350 tons, tiebar spacing of 810 x 710 mm, and a screw diameter of 52 mm. Ideal for precision electrical injection molding. Contact us for more information. Application Types Knedpexllnhefx Aabec Injection Moulding