Mos

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Codpfex Dipmsx Addeaa Position 3: Single Edgebanders BIESSE-STREAM B1 9.0

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding Cajdpfx Adex Dcn Nsdoa MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Cedpfx Adox A Tzqodoaa Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: used, machine/vehicle number: 008161, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Cjdpfsx A Tlcsx Addeaa Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Cjdpfx Asx A Ti Ioddsaa Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Csdpfxjx A Th Dj Addsaa Corner Rounding Unit: yes Operating Units: 7 nr

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Csdex A Thqepfx Addeaa Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Casdpfex A Tgysx Addsa Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008294, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 210 + ZHR 01 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 210 + ZHR 01 Cjdpfx Adsx A Tf Nsdoaa

Condition: excellent (used), Year of construction: 2014, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 25.12.004.14, - Very good edge banding machine for sale due to purchase of a new one. - New jointing cutters were installed only 2 months ago. - Low total operating meters! - The machine is still in operation and can be tested. - The edge finish is still very good. Features: - Jointing up to 2mm Cedpsx A S N Hofx Addjaa - End trimming unit - Multi-radius flush trimmer - R2 radius scraper - Surface scraper - Buffing unit Price includes VAT. Sale excludes any warranty! If you have questions, please call 0175/5429734. Available from the end of January 2026.

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Application Types Edge Banding Codpjx A I E Dsfx Addoaa

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Cajdex A Hi Ijpfx Addja Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05

Condition: used, machine/vehicle number: 008093, Type of edging: Thin edge, Thick edge Cedpfxox A Hgas Addsaa Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, 2 x Biesse Akron 1440 Edge Banders Edgebanders are 2017 + 2018 Extra Glue Pot available for each Homag Returns included in sale Machines are in production and ready for use Cajdpfx Aex A E Ipoddja Price is per machine

Condition: like new (used), Year of construction: 2022, - TOP condition (as new) - 21" SMART-Touch - Panel thickness: 8 - 60 mm - Edgebanding tape thickness: 0.4 - 3 mm - Solid edging: 0.8 - 12 mm - Guillotine shears for tape material up to 3 mm - Minimum workpiece length: 140 mm - Feed speed: 12 m/min - Automatic lubrication for feed chain and guideways - Pneumatically controlled infeed stop for workpiece spacing - Upper pressure unit motor-adjustable via PLC with double-row smooth upper pressure rollers - Segmented, rubberized support pads on the transport chain with quick-change system - Motorized infeed fence adjustable to jointing dimensions via PLC - Extendable workpiece support - Jointing unit with plunge-controlled milling, 2 x 2.2 kW - Jointing cutter D=80 mm, SB=64 mm with DIA indexable inserts - Teflon-coated gluing unit with synchronized glue roller, switchable for with/against feed direction, suitable for processing EVA and PUR adhesives - Pneumatically controlled pressure unit with 1 driven pressure roller and 2 conical follow-up rollers - Edge thickness adjustment via PLC - End trimming unit with 2 motors - Flush/chamfer/radius milling unit (top/bottom) with position control via PLC - Corner rounding unit with motorized adjustment for post and soft-forming profiles, operation-controlled - Radius scraper unit R2/R3 - Surface scraper unit, pneumatically controlled with nesting execution - Buffing unit - Separator agent spraying Casdjx A E Hlepfx Addoa - Sliding agent spraying - Cleaning agent spraying

Condition: excellent (used), Catalogue number 7843 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Min. workpiece length: 120mm - Min. workpiece width: 90mm - Workpiece thickness range: 10-45mm - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Feed speed: 6.4m/min - Power consumption: 2.3kW - Required air pressure: 0.7 Mpa - Spindle speed: 10,000 rpm - Extraction connector: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm - Weight: 360kg ADVANTAGES – Unpainted – With polisher – Used machine, in very good condition Cajdpfxox A Dt Dj Addja Net price: 12,000 PLN Net price: 2,860 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Year of manufacture: 1992 Cajdpfx Ajx Avcdeddja For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty.

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Caedpex Aqx Tsfx Addja Fully automatic edge magazine for roll and strip material GLU-JET cartridge glue application station + PU gluing Adhesive application via nozzle technology Sensing nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness With pneumatic tilt adjustment from 0-10° for the trimming saws Milling unit: flush trimming 6 mm, radius trimming, bevel trimming - 15° Corner copying unit - 3 mm edge thickness Scraper unit for bevels and radii with 2 scraper holders Flat scraper unit - finish Buffing unit Spraying device in infeed and outfeed area as well as for PU Machine comes with all processing tools Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: used, Year of construction: 2007, NC Control System TS 10: Windows CE operating system USB port Consisting of a chain track and overhead pressure belt ensuring optimal clamping of the workpiece during processing. Glue Unit, Edgebanding Application and Pressing Unit VC-710: Tekno glue system: Glue roller that can run with or against feed direction Quick-change glue pot for easy cleaning or glue colour/type change Automatic edge feeding for coil material or solid strips: Ø900 mm disc for coil material Magazine for solid strips with cooling system and manual vertical adjustment Knives for cutting coil material up to 3 mm thickness with automatic pressure adjustment Pressing unit: Large motorised Teflon-coated roller with individually adjustable pneumatic pressure 5 × Ø60 mm Teflon-coated rollers with pneumatic adjustment; first two are reverse-tapered Machine supplied with full sound-insulated safety enclosure. Technical Data: Workpiece height: 10–60 mm Workpiece height with corner rounding: 10–35/60 mm Edge material height: 14–64 mm Coil edge thickness: 0.4–3 mm Solid strip thickness: 0.4–15 mm Workpiece overhang from chain: 25 mm Minimum workpiece length: 140 mm Minimum workpiece width (length 140 mm): 85 mm Minimum workpiece width (length 250 mm): 50 mm Feed speed: 10–14–20 m/min Electronic NC-controlled positioning of pressure beam Lighting inside safety enclosure Infeed plate spacer with capacitive sensor RPT Akron 800 pressure rollers with timed insertion IN-701V pneumatic tilting of end-trimming motors in 4 positions 3 pneumatic exclusions of machining units Quick selection of 2 positions from control panel for CR-202 or CR-401 8000058 – Quick Selection of 4 Positions (Replaces the 2-position quick selection) 8000037 – Heated Infeed Fence For removing moisture from the bonding surface. 8000100 – Glue Pre-Heating Unit QM-701 Facilitates glue colour/type change Refills glue pot automatically Glue melted at 180°C and transferred to glue pot 8000300 – Pre-Milling Unit FI-701 – 1800 W Prepares the workpiece before edge application: Horizontal and vertical movement of 2 motors on linear guides Independent automatic engagement of each motor Independent copying shoes with manual adjustment and mechanical digital displays Auto-Set system positions cutters according to panel thickness Includes 3 mechanical high-precision digital displays 1 set Dia cutters for panel thickness 12–22 mm Motor Power Increase to 3500 W for Pre-Milling Unit End Trim Unit IN-701-V Cajdpfx Aex Ah Ixsddea Top/Bottom Trimming Unit RS-701 – 800 W CNC-controlled pneumatic switching between 2 trimming offsets, incl. pneumatic exclusion. Tiltable Top/Bottom Trimming Unit RI-701 – 650 W NC-Controlled Multi-Function System (4 operations) 4-position revolver head with multi-function knives and independent pneumatic exclusion of motors. 4-Motor Multi-Function Corner Rounding Unit CR-401 Fast change between thin and thick edges (0.4 mm ↔ 3 mm) via FAST 2-position system Equipped with R=3 mm, motors at 12,000 rpm Corner rounding speed 18 m/min, trimming 20 m/min Edge Scraper RB-701 Glue Scraper RCC-701 Brushing Unit SP-700 Hot Air Blower PH-700

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2459, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure - Machine length 4,300 mm - Machine width 1,400 mm - Weight approx. 1,250 kg - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) Cajdpfxsx Ahmuo Addea - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing

Condition: like new (used), Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 0-261-20-4425, total length: 4,860 mm, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, total height: 60 mm, overall weight: 1,690 kg, type of input current: three-phase, compressed air connection: 6 bar, input voltage: 400 V, power: 10.5 kW (14.28 HP), operating pressure: 6 bar, Few working hours. Machine is still conected. Cedpfx Ajxz Uyreddoaa

Condition: like new (used), pre-milling unit granulate glue station pneumatic pre-cut guillotine pressure zone with three rollers unit with two precision trimming saw blades top/bottom milling unit with profiling cutters profile scraper top/bottom flat scraper automatic conveyor lubrication Cjdpfxexz Rgho Addsaa year of manufacture: 2012

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Fully functional , Csdpfx Adjxz Icgjdoaa Can be tested ,

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Edgebander , Felder G330 , Exelent , 2017/18 , Low working hours , Teflon Gluepot , Quck system adjustment , Flat scraping for finisin Unit , Codpsxz Ia Ssfx Addeaa

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Well-maintained, machine has been serviced regularly Equipment and technical specifications: - Jointing unit - Glue application system with glue pot and roller - Crosscut saw - Crosscut shear - Pressure zone - Extendable workpiece support - Quick-heating glue pot - Combination milling unit - Surface scraper - Chassis Cjdpexz Iafefx Addoaa Availability: Approx. mid-April 2026 Storage location: Hesse