Borak Solutions

Condition: used, Year of construction: 2018, operating hours: 3,550 h, functionality: fully functional, Used machine Year of manufacture: 2018 Technical Specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0–100 mm Speeds 1st unit, frequency-controlled: 5–15 m/sec 2nd unit, frequency-controlled: 6–17 m/sec Feed speed, frequency-controlled: 0.2–8 m/min Electrical Main motor 1st unit – W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit – W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Dust extraction per unit Required capacity with 100 mm connection: 6,100 m³/h Machine weight: 3,750 kg Accessories / Special features Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction unit Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Incl. H14 filter - Incl. EX version for aluminum - Incl. sludge container Iodpfx Ajx I Ed Rjanjtr

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Iedpfxex I Abmj Aanjtr

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm Itedpfx Aex H Tvfjaner dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Condition: used, Year of construction: 2023, machine/vehicle number: SN056444, 12 months warranty. Itsdpfx Aasx Hua Sonjr

Condition: used, Year of construction: 2007, working width 1100 mm workpiece height max 150 mm Itedpfx Aex Hp Anoanor sanding belt measurements 1120 x 2150 mm feed speeds 1,0 - 10,0 m/min weight 3.000 kg dimensions 2300 x 1500 x 2300 mm Equipment/Accessories: - W=sanding belt unit - B=brush unit (

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 14000 kg This AGTOS blasting system was manufactured in 2018. Designed as a deburring machine, it efficiently removes burrs from various materials, enhancing surface finish and part accuracy. Ideal for operations requiring precise deburring. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery Iedpfx Aajx D Rm Tonstr

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1400 mm Measurements depth 2600 mm Measurements height 1800 mm Machine weight 2000 kg Additional Equipment Aperture Width: 1000 mm Material Throughput: Automatic Adjustment Medium: Electrical brush block Iodpfxjx D R Iqe Aanstr This LISSMAC SBM-M 1000 B2 deburring machine was manufactured in 2012. It features an automatic material throughput with an aperture width of 1000 mm and can handle sheet thicknesses up to 20 mm. The machine is equipped with a powerful brushing motor and offers an infinitely variable feed adjustment. Weighing 2000 kg, it's designed for robust and precise deburring operations. If you are looking to get high-quality deburring capabilities consider the LISSMAC SBM-M 1000 B2 machine we have for sale. Contact us for more information. Application Types Grinding

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 5300 kg This TIMESAVERS 41serie 900 WRD N was manufactured in 2006. It features a 900 mm working width and can handle sanding heights up to 60 mm. The table adjusts from 0 to 80 mm, supporting various material sizes. Ideal for consistent deburring applications. Contact us for more information. Application Types Other Sheet Metal Machinery Itodpfx Aaox D S A Nener

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1400 Iedpfxox D Sbxj Aanjtr Measurements depth 3100 Measurements height 1800 Machine weight 2300 Main Drive Spindle speed range 1415 Maximum sheet thickness 20 mm This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information. Application Types Other Sheet Metal Machinery

Condition: ready for operation (used), Year of construction: 2010, This TIMESAVERS 42-serie-1350-RB was manufactured in 2010. It features a working width of 1350mm and is equipped with rotary brushes, a vacuum table, and a wet extraction unit. If you are looking to get high-quality deburring capabilities, consider the TIMESAVERS 42-serie-1350-RB machine we have for sale. Contact us for more information. Iodpfx Aaox D R Rlenotr Application Types Other Sheet Metal Machinery

Condition: ready for operation (used), Year of construction: 2000, working width: 1,300 mm, total height: 2,240 mm, overall weight: 2,300 kg, product length (max.): 2,070 mm, General Data Machine weight 2300 kg Measurements height 2240 mm Dimensions Machine Length 2070 mm Technical Specification Iedpsx D E Hzofx Aanstr Working Width 1300 mm This Fladder 300 Gyro was manufactured in 2000. It features a working width of 1300 mm, six brush heads, and a rotating and oscillating sanding unit. Equipped with two vacuum fans and a vacuum conveyor belt, it ensures efficient material handling. The motor power is 7.5 kW, and it offers an infinitely variable feed speed of 2 - 8 m/min. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 2025, machine/vehicle number: SN075105, 12 months warranty Itsdpox A Tpzsfx Aansr

Condition: used, Year of construction: 2024, machine/vehicle number: SN071679, 12 months warranty, 1800 operating hours Itjdpfxox A Tgme Aaner

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, overall weight: 7,000 kg, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Working width: 950 mm Working height: 0.5–120 mm MACHINE DETAILS Iedpfsx Ahm Ijx Aanstr Control system: CNC Motor power: 39.0 kW Dimensions & Weight Dimensions (L x W x H): 3,940 mm × 1,980 mm × 2,010 mm Weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: used, Year of construction: 2017, controller model: , _____ Description: Year of manuf. : 2017 Material thickness : 100 mm Material size : 1350 mm Working area Maximum clear passage width:1350 mm Sheet thickness range:0.3 to 100 mm Stepless adjustable feed speed:0.5 to 10 m/min :Electric sheet thickness adjustment :Electric tool positioning Power supply Operating Voltage:Three-phase 400 V with neutral and protective earth (3 x 400 V/N/PE) Frequency:50 Hz Power Consumption:36 kW Supply Line Fuse:63 A Supply Cable Cross-Section:16 mm² Control Voltage:24 V DC Short-Circuit Current Rating:10 kA Machine Iodpfsxy Dmfsx Aanotr Weight:approx. 3,500 kg Dimensions (W/D/H):approx. 2,120 x 3,093 x 2,400 mm Aggregates / Units / Stations Contact Roller Unit:Adjustable working speed from 3 to 18 m/s Multi-Rotation Brush R2:Equipped with 3 brush heads, each with 2 brushes Conveyor Belt Cleaning:Dry cleaning system Vacuum System:Integrated vacuum with a 5.5 kW blower Workpiece Thickness Measurement:Automatic height detection Extraction System:No extraction unit included

Condition: excellent (used), Year of construction: 2018, operating hours: 1,950 h, Model: Timesavers Grindingmaster 81-Series-2100-W Year: 2018 Operating Hours: 1,950 h Configuration: High-performance wide belt grinding with fixed table and Siemens control. Itjdpfx Asxxznksansr Capacity & Working Dimensions Min. Dimensions (LxWxH): 600 x 600 x 10 mm. Max. Dimensions (LxWxH): 1680 x 1830 x 30 mm. Max. Workpiece Weight: 250 kg. Machine Opening: 1 - 100 mm. Grinding Unit (Head 1) Contact Roller: Ø 280 mm, 70° Shore Ni 37 45. Main Motor: 90 kW. Belt Speed: 8 - 22 m/sec (frequency controlled). Rotation: 2 directions. Belt Dimensions: Length 2620 mm x Width 2130 mm. Oscillation: Electronic, adjustable (2130, 1600, or 1380 mm).

Condition: used, Year of construction: 2020, Opportunity to purchase this LISSMAC deburring machine (Y2020) with working width of max. 1500 mm and sheet metal thickness from 0,5 mm to 50 mm. This machine is in very good condition with 2900 working hours and it can be inspected under power upon appointment. Additional equipment: o dry vacuum unit Ijdexxykqopfx Aanjtr o 2 x 2000 m conveyor belts Availability: 11/2025 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Max. thickness: 0.5 - 50.0 mm Operating voltage: 400 V 50 Hz Max. width: 1500 mm Speed: 0-4 m/min Rated current: 82 A Rated power: 44.5 kW Operating hours: 2900 Weight: 4200 kg Machine dimensions (LxWxH): 3600 x 2100 x 2000 mm

Condition: used, Year of construction: 2023, intake manifold diameter: 250 mm, power: 4 kW (5.44 HP), Used extraction system with 4 kW power, in very good condition and inspected by the manufacturer. All filters have been replaced. Isdpfxsxw Ik As Aanotr

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,100 mm, sheet thickness (max.): 100 mm, The 32 RB series offers the solution for manufacturers delivering premium-quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive lamella brushes, which evenly deburr and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB) for consistent deburring and finishing of flat sheet metal parts. All-around processing in a single pass, providing the part's surface with a non-directional finish. Equipped with one (or more) abrasive belt units (W) for pre-deburring and final finishing. - Abrasive belt unit Itjdpfxoxw Ikco Aanor - Rotary brush unit (self-calibrating) - Abrasive belt unit

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) Itsdexw Ih Uspfx Aanor - Rotary brush unit with 8 brushes (self-calibrating)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, nominal power: 11 kW (14.96 HP), Wet extraction for metallic dusts with 11kW and approx. 6000 m³/h. Demonstration machine in very good condition. Ijdpexw Ib Ijfx Aanetr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Passage width: 1500 mm Iedpfjxwuhzox Aanetr Sheet thickness: 0.5–50 mm Load capacity: 300 kg/m Infinitely variable feed: 0–4 m/min Control: NC Total power requirement: 33 kW Machine weight approx.: 4,200 kg Space requirements approx.: 3600x2100x2000 mm Accessories: - Lissmac extraction system

Condition: not inspected (used), 41 Series WRD untested, available at a low price. Iedpfx Aoxwbb Ueanetr

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - Itedpexuu Dkefx Aanjr 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: good (used), Year of construction: 2015, functionality: fully functional, working width: 1,350 mm, Used Costa sheet deburring machine, working width 1350MM. 2 rows with brushes, many wear parts included. Isdpfoxrrwvex Aanstr