Multihead Weigher

AMTEC MHW 10HD 08-SV

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing Dcsdpfeqt Dmysx Addor - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 1999, condition: excellent (used), Rovema VPI 260E vffs machine with powder auger filler. Dcedpeiwdgpjfx Addjr Optionally with full new electronics.

Year of construction: 2015, condition: excellent (used), Syspal Tote Bin Lifter / Tipper Tipping height 1400 Fully stainless steel Mobile on lockable castors Electrohydraulic operation Built-in battery power pack Complete with plug in charger Dcedpsim Ivvefx Addor Charge lasts for 1 week, depending on usage In excellent condition

Condition: good (used), Year of construction: 2005, functionality: fully functional, Machine was used to pack potato chips at Sibell in France. It can come with Safeline drop through metal detector and Markem X65 coder and MBP 14-head weigher from 2006. Bagger and weigher were used together before. It can come with three sizes of forming shoulders: 80,110 and 160 mm. One is included in the offered price. Dcsdpfx Adsr Hdimedor

Condition: good (used), Year of construction: 2017, REF: MM5724 Complete automatic volumetric filling and bagging system with PLC control panel, suitable for packing many dried snack-type products such as nuts, seeds, grains, dried fruit, etc, into pillow-packs. The product moves from the opper via a vibrating tray / chute into a turning bowl with cup openings. The amount per cup is then dropped into the funnel through the forming tube into the bag. The size of the cups determines the filling amount. The turning bowl is adjustable in height so even with the same size cup there are various filling sizes possible.  Model - MWM-900 Automatic Form Fill Seal Machine.  Sealing jaws: Horizontal - 260mm. Vertical - 300mm.  Pack size range - Length: 50mm - 320mm. Width: 140mm (with current forming tube/shoulder).  Speed - up to 30 packs/minute, depending on product size.  Dodpfxot Sw Elo Addocr Filler - volumetric, 20g-1000g range. Can double drop for larger pack sizes.  Electric supply - 440 V / 50 hz / 3 phase. Features a metal detector at the bottom of the filling tube / inside the forming assembly and has hot foil stamping for printing on pouch. Previously used for packing popcorn. 

Condition: ready for operation (used), Screening machine Hein Lehmann Brand: Hein Lehmann Type: flip/flop Surface : 5300 x 1500mm – 1 Decks Driving: 11 kW E-Motor Incl.: Chassis. Dcsdpsi A Ayzefx Addjr

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/1998, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 1 mm, total length: 2,550 mm, total width: 1,600 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 5,400 mm, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container lock, U-protection, pneumatic adjustable drawbar, aluminum side wheel guards, twin tyres, storage box, removable drop sides Wheelbase: 5400 mm Body: Trailer for roll-off containers in lengths 6m-6.75m SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stop. The trailer can also be used as a flatbed! Aluminum side walls 600 mm high are included with the trailer! Drive-on ramps available for an extra charge of 900.00€ net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dodpsi Rpxwefx Addscr - .

Condition: good (used), Backsaver Van Oirschot Mobile Dolav Bin Lifter / Tipper Fully stainless steel Lifting capacity 2 ton pallet boxes Fork width: 550 mm, maximum box width: 1050 mm Total dimensions: 1100 mm x 1500 mm x 1200 mm. Dcsdportadksfx Addor Complete with battery charger

Condition: used, Stainless steel Pipe screw screw conveyor feed screw conveyor screw Manufacturer: WAM Type: Pipe screw TX 250 Length screw ribbon 4400mm Dcjdpfx Aewyfvqjddor Diameter screw ribbon 250mm Motor power: 3kW Increasing pitch 175mm - 275mm Diameter inner pipe 114mm C.o.h. inlet outlet 4000mm Diameter inlet outlet 270mm Length drive 910mm 2 Pieces in stock See our other advertisements VMA Wekerom

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft Dodpfx Adowld Tfedecr - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm