Vertical form, fill and seal machine

Bosch SVZ 2500 A (2733)

Year of construction: 2005, condition: like new (used), functionality: fully functional, empty load weight: 1,600 kg, maximum load weight: 1,000 kg, inner dimension height: 1,200 mm, inner dimension length: 1,390 mm, inner dimension width: 1,390 mm, nominal power: 64,000 kW (87,015.68 HP), pump capacity: 500 l/min, pump pressure: 4,50,000 bar, water tank capacity: 800 l, machine/vehicle number: 25191, A machine for industrial cleaning of machinery and parts. It has 3 washing chambers, one main and 2 auxiliary. The technical condition of the equipment is excellent - used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main parts of the machine: Door to washing chamber (on cylinders). Upper washing nozzle Lower washing nozzle Pressure piping Control cabinet Washing pump Auxiliary pump 1 Auxiliary pump 2 Water heater (for each chamber) Gcjdpfx Ahjrkz Ste Doa Drain valve Water level sensor Basket for washing elements Oil separator Steam vent Water pressure indicators Automatic water filling and chemical dosing system In addition, we offer a reverse osmosis water filter in the set.

Condition: excellent (used), Gas condensing boiler Viessmann Vertomax 285kw Gcjdsigql Dspfx Ah Dja

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Gjdpfxjd Nuu He Ah Djca Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Year of construction: 2025, condition: new, functionality: fully functional, NEW - NEW Unox Bakertop Plus 6 Baking Station NEW - NEW Unox TOP model Convection oven for 6 trays 60x40 cm Top extraction hood with steam condenser Prover below for 6 trays 60x80 cm or 12 trays 60x40 cm Oven is mobile Connection: 400V, 32A CEE plug Water connection: 3/4 inch, water outlet: DN 40 Dimensions: 865 x 1100 x 2000 mm (W x D x H) Godpjxckaqsfx Ah Dsca Oven NEW with warranty + spare parts service Quality from a professional supplier! Benefit from over 35 years of experience! Option: Pure water filter Baking trays Ethernet connection DDC.App Spray & Rinse cleaner Service package Maintenance contract Delivery service Instruction & commissioning Visit our Unox demonstration bakery!

Condition: used, Year of construction: 1974, Please contact ATS Norway for more information Please provide reference number upon request: 20713 Specifications: 1974 model Gcsdpfx Aowq Uygsh Doa Hourly rate is uncertain Weight: 10,400 kg Tires (see pictures) Chains Okay bucket Width: approx. 2.5 m Maintenance is taken care of by owner Ready for delivery Notes: Bad battery Owner says it works, but probably needs some maintenance. Own weight: 10400 Total Weight: 10400 Width: 250 Model: LM 846

Condition: excellent (used), Year of construction: 2008, operating hours: 56,000 h, For sale: Arburg 570-2000-800 injection moulding machine, year 2008. In very good technical and visual condition, operates very quietly, no oil leaks. Selogic control system. Bimetallic injection unit, 45 mm diameter. 1 x air, 2 x hydraulic core, robot interface. The machine is sold without material or colour additive feeders. Gcodpeukirbofx Ah Dea

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping Godolc Dwvspfx Ah Doca 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: good (used), used boring machine Gjdpfx Aheh Ryc Hj Djca Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Construction year 2011 We can offer you this robot overhauled too! Godpfx Aheim Si As Djca

Year of construction: 2024, condition: new, Machine provides fully automatic filling process for webbed Bag in Box bags. After inserting the first bag, machine removes the cap, fills the liquid and caps the bag. Then it releases the filled bag and takes another one for filling. This way the filling process is continuous and operator only needs to take the filled bag out of machine. To fill separate Bag in Box or Pouch bags, insert a package into the filler and press START button – machine automatically removes the tap, vacuums the bag, fills it with liquid and closes the bag. Capacity: ~2000 l/h Gcedpjq Nl A Refx Ah Dja -Perfect for filling various liquids: from juice, wine, milk to broth, oil, soap, etc. -Easy-to-use mechanism does all the work automatically. In addition to that, bags can be supplied to machine manually (separate bags or pouches) or automatically (bags in web). -Suitable for both hot and cold filling. -Machine fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. -Machine fills packages with tap closure. It is also possible to fill packages with different closures on request. -Laser safety mechanism protects limbs by automatically stopping & cancelling the filling process in case of an accident. -Machine is made from stainless steel materials (AISI 304). -Touch-screen control panel and multi-language menu grant easier work. -The error of repeatability of volumes is only ± 0,3 %. -Additional filling table is possible, which slides beneath the main table for filling bags of bigger volume (from 20 to 30 L). -The filler is easy to clean after work with external and CIP cleaning. -Working surface of the table consists of conveyor rollers which are exceptionally easy to clean. -All parts have IP 65 water protection.