Grinding Plant 8 T/hour

Breton

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 600 mm, total height: 4,300 mm, overall weight: 28,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 20,000 W, tool weight: 15,000 g, product length (max.): 4,798 mm, number of axes: 5, This 5-axis Breton Matrix k16 was manufactured in 2002. It features a working area of 2000 × 1600 × 800 mm with vertical spindle and a tool magazine with a 30-position capacity. The machine offers rapid traverse rates up to 40 m/min and a maximum spindle speed of 24,000 rpm. If you are looking to get high-quality milling capabilities, consider the Breton Matrix k16 machine we have for sale. Contact us for more information. • Working area: • With vertical spindle (Y / X / Z): 2000 × 1600 × 800 mm • With horizontal spindle (Y / X / Z): 1600 × 1200 × 800 mm • Axis travels: • C: 0° – 360° continuous • A: ±105° • Speeds: • Rapid traverse X/Y: 40 m/min • Rapid traverse Z: 20 m/min • C axis: 19.5 rpm • A axis: 12 rpm • Acceleration X/Y/Z: 2.5 m/s² Hodpjyf Iiiofx Aameh • Spindle (electrospindle): • Tool holder: HSK A63 / E63 • Max torque: 38 Nm • Max speed: up to 24,000 rpm • Tool magazine: • Capacity: 30 positions • Max tool diameter: 140 mm • Max tool length: • 200 mm (Ø 140 mm) • 300 mm (Ø 90 mm) • Max tool weight: • 15 kg at 16,000 rpm • 12 kg at 24,000 rpm

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 Hodoidi Ivspfx Aamoh - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: used, Year of construction: 2005, control Heidenhain x-travel 900 mm y-travel 900 mm z-travel 500 mm a-axis -30/+110 ° Hjdpfx Aajydqrksmeh c-axis 360 ° table diameter 800 mm table load 1.000 kg spindle tunring speed 18.000 U/min spindle drive 40 kW torque 137/100 Nm tool taper HSK-63 A number of tool places 30 Pos. max. tool diameter 90 mm max. tool length 300 mm max. tool weight 10 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine The machine has a wobble head and a 750mm diameter grinding disc. The machine can be used to polish the surfaces of hard stone and soft stone (marble). polished, satinized and bush-hammered with the appropriate tool. Hjdperpi E Aofx Aameh

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Hodpfx Aopgkmwoamjh Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT XCEEDER is een 5-assig geïnterpoleerd bewegend bewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking. - Maximale werkstukdiameter: 900 mm - Maximale afstand tussen spindel en tafel: 700 mm - Hydraulische klemming op tafel Hsdpfxex Twa Ie Aamjh - A-as: -30° / 110° - C-as: continu - max. koppel op de spindel: 18/16 Nm - Gereedschapswisselaar met 150 posities Opties die op deze machine worden gemonteerd: 1 - 40.000 tpm hogesnelheidsspindel 2 - tafel dia 700 mm met hydraulische klemming Gereedschapswisselaar met 3-150 posities 4 - spaantransportband 5 - koelsysteem met terugwinning 6 - Koelvloeistoftemperatuurregeling 7 - hoge drukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van een opmerkelijke winstmakerij, via het gietijzeren portaal, van alle trillende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt een thermische inertie en is een effectief bestanddeel tegen bewerkingen, wat resulteert in zeer nauwkeurige en onverwachte reacties op het bewerkingsproces. Table dimensions: dia 700 mm Max weight on the table: 1000 kg Admission in spindle (ISO): HSK-E40 Power on the spindle: 45/40 kW Number of axes: 5 AXIS simultaneous Toolchanger: yes Number of toolholders: 150 positions

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT De Ultrix 800 RT is een multifunctioneel bewerkingscentrum met 5 geïnterpoleerde assen en een beweegbare portaalconstructie voor snel frezen, draaien, slijpen, boren, tappen, afwerken, ontbramen en voorbewerken van complexe onderdelen. Bij gebruik voor draaien verticale draaibank: - Draaibereik: 1100 mm - maximaal gewicht van het werkstuk: 700 kg - 40/30 kW op de tafel Hodjxtgkaepfx Aamoh - Maximaal koppel op de tafel: 1500 Nm - Maximale snelheid van de tafel: 800 rpm!! - hydraulische klemming op tafel - gereedschapsconus voor draaien: KM63 - Gereedschapswisselaar met 150 posities, waarvan 24 voor draaien. Bij gebruik voor frezen, slijpen, boren, ... bewerkingscentrum: - X-as: 800 mm - Y-as: 900 mm - Z-as: 600 mm - A-as: -30° / 110° - C-as: continu - maximaal gewicht van het werkstuk: 700 kg - 55/40 kW op de spindel - maximaal koppel op de spindel: 18 / 16 Nm - maximaal 40.000 toeren per minuut - gereedschapsconus voor frezen: HSK-E40 - Gereedschapswisselaar met 150 posities en 126 gereedschapsposities voor frezen, slijpen en boren Lijst met opties die op de machine zijn gemonteerd: 1 - Hogesnelheidsspindel met 40.000 tpm 2 - tafeldiameter 700 mm met hydraulische klemming 3-150-positie gereedschapswisselaar 4 - spanentransportband 5 - koelsysteem met terugwinning 6 - regeling van de koelvloeistoftemperatuur 7 - hogedrukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - doos voor het verzamelen van chips 10 - Voorinstelsysteem en gereedschapsintegriteit: laser- en mechanische meetsonde voor meetinstrumenten 11 - Renishaw-sonde Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Hjdpfx Aowcqr Asamjh Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. Hedpstwww Hefx Aameh The machine needs to be adapted for different voltages and frequency. The machine is not available for North America.

Year of construction: 2010, condition: used, Levibreton KGP is a calibrating machine for levelling strips and tiles, which move on a conveyor belt, using a series of diamond tools. Hedpfxsvun T Ao Aamsh

Condition: excellent (used), Steton PF 530 E. Electric adjustment of the planing height -working width 53 cm -Ters knife shaft - length of the tops 275 cm -motor power 4kW / 380V -resistance set at an angle Hsdsipx Uqepfx Aamoh -electric brake The machine is in very good condition, runs quietly.

Condition: used, functionality: fully functional, GRINDING PLANT capacity 1 t/h with roll press, sieving in 3 granulometries with nutation screen and horizontal screens. Input: inlet grain size < 10 mm (marble, granite and quartz) with loading by big-bags on the included hopper. Output: 3 grain sizes (0-50, 50-100 and 100-300 microns). Hedpfxjx Agxvo Aameh 70% of 100-300 microns, 15% of 50-100 and 15% of 0-50 microns. Storage with propulsion system for sending to silos (silos not included)

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Hedpfsvtdztjx Aameh

Condition: good (used), The machine used for washing fruit and olives is in good condition Hedpfovtf T Dox Aameh

Condition: refurbished (used), functionality: fully functional, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table width: 2,300 mm, table height: 1,800 mm, table length: 4,500 mm, table load: 500 kg, input voltage: 400 V, power: 30 kW (40.79 HP), input frequency: 500 Hz, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) Hjdpfxoxbgvfe Aamsh - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions