Forklift
CLARK C55s

Name: CLARK C55s
Brand: CLARK
Price: 26990 EUR
Availability: InStock

ONO plus VAT

€26,990

Year of construction

2016

Condition

Used (fully functional)

Location

Warstein

Machine data

Machine type:: Forklift

Manufacturer:: CLARK

Model:: C55s

Year of construction:: 2016

Condition:: used

Functionality:: fully functional

Operating hours:: 1,137 h

Price & Location

ONO plus VAT

€26,990

Location:: Warstein, Germany

Call

Technical details

Load capacity:: 5,500 kg

Fuel type:: gas

Fork length:: 2,000 mm

Equipment:: cabin, sideshift

Details about the offer

Listing ID:: A22505397

Update:: 23.09.2026

Description

For sale is a very well-maintained Clark C55sL LPG forklift, manufactured in 2016.

The forklift is in good technical and optical condition and has only been used for 1,137 operating hours.

Ideal for use in industry, warehouses, production facilities, or outdoors.

Since the last maintenance, the forklift has only been operated for approximately 6 hours. Consequently, it is still in very good condition and ready for immediate use.
Nedszr H Szjpfx Ab Ujwl

Technical specifications:
Manufacturer: Clark
Model: C55sL
Year of manufacture: 2016
Drive: Gas (LPG)
Operating hours: 1,137 h
Load capacity: 5,500 kg at a 500 mm load center
Lifting height: 3,300 mm
Side shifter integrated
Full cabin
Work lights
Double gas cylinder holder
Tires: see pictures
Fork length: 2000 mm

Note:
The UVV (occupational safety) inspection expired in 2024, as the forklift has hardly been used since then.

For an additional fee, a new UVV inspection can be carried out, so that the forklift can be handed over ready for use.

Inspection and a test run are possible at any time by appointment.

All information has been provided to the best of our knowledge and belief. Errors, prior sales, and changes are subject to change. All information is provided without warranty; no liability is assumed for the accuracy, completeness, and currency of the information.

The sale is made with the exclusion of any liability for defects in the material, insofar as this is legally permissible.

The forklift can be inspected and tested after prior appointment.

The price is net plus 19% VAT.

Loading onto a suitable transport vehicle can be assisted upon agreement. The transport or collection is to be organized by the buyer.

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2023

13 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

These listings may also fit your interest.

Listing

Nattheim

6,764 km

Finger jointing line

Call

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Nwjdpjvvi Tyefx Ab Ujl Location: Customer

See details

Listing

Germany

6,627 km

Facing Lathe
ZERBSTDP 2600

Call

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm Nwjdpfx Abswtctye Uel max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

See details

Listing

LOADER (BRIDGE-FRAME) DOUBLE PICK-UP MEINERT (IMA Group) P 416 (D/B 3000/1300) Concept

Roreto

6,952 km

LOADER (BRIDGE-FRAME) DOUBLE PICK-UP
MEINERT (IMA Group)P 416 (D/B 3000/1300) Concept

Call

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Nedpfxefi Tg He Ab Uewl Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

See details

Listing

3-axle truck trailer, low-loader trailer, platform trailer with tarpaulin, sliding tarpaulin ETSCHA, Müller-Mitteltal

Hessisch Lichtenau

6,811 km

3-axle truck trailer, low-loader trailer, platform trailer with tarpaulin, sliding tarpaulin ETSCHA,
Müller-Mitteltal

€14,500

Fixed price plus VAT

Call

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Nwedpot N Antsfx Ab Uel Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

See details

Listing

50kVA emergency generator Newpower Generator NWR55 Ricardo Motor Newpower Generator

Hamburg

6,796 km

50kVA emergency generator
Newpower GeneratorNWR55 Ricardo Motor Newpower Generator

€6,847

Fixed price plus VAT

Call

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR55 Ricardo Motor Newpower Generator Generator set Maximum power: 40kW / 50 kVA Engine : Kofo RIcardo N4100ZDS-42, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2280x1030x1260 mm Weight: approx. 1020kg Diesel tank: 118 L. At 100% load: 8.5 L/h At 75% load : 6.5 L/h At 50% load : 4.4 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: Nwsdjmgbayspfx Ab Uol - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

See details

Listing

Table type boring mill Juaristi TS5 Juaristi TS5

Babberich

7,060 km

Table type boring mill Juaristi TS5
JuaristiTS5

Call

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Nodpfx Asy Hq Dyeb Uowl Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Wioska

6,373 km

KALMAR forklift
KalmarLMV 9-600

Call

Listing

Germany

6,848 km

Band saw
PanhansBSB 600

€6,650

Fixed price plus VAT

Call

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction Nwodpfxow Nablo Ab Uol · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

See details

Listing

San Giovanni Al Natisone

6,515 km

5 SPINDLES MOULDER
WEINIGPROFIMAT 23

Call

Listing

Germany

6,760 km

CNC Punching Machine
AmadaAC-2510 NT

Call

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Nwjdsza E S Dspfx Ab Ujl

See details

Advertise here

ForkliftCLARK C55s

Machine data

Price & Location

Technical details

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Forklift
CLARK C55s