Hand Pallet Truck

Clark CPJ25 - 540X1150 mm *Neu

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Dujdpsxfyfbjfx Ag Rel Fork width: 540 mm Mast type: Standard Front wheel type: Polyurethane Front wheel condition: 80 - 100% Rear wheel type: Polyurethane Rear wheel condition: 80 - 100%

Condition: new, Working width 3500 mm Duedpsd Rzc Refx Ag Rel Working height 2300 mm Number of cylinders 4 St.

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Dusdpfx Aoxfyd Reg Rjl Front tyre type: Polyurethane Front tyre condition: 80 - 100% Rear tyre type: Polyurethane Rear tyre condition: 80 - 100%

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Front tyre type: Polyurethane Front tyre condition: 80 - 100% Dodjxfyd Djpfx Ag Rjul Rear tyre type: Polyurethane Rear tyre condition: 80 - 100%

Condition: excellent (used), Buderus SB 625 -185kw boiler Duedpju I Rx Ssfx Ag Rel

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Front tyre type: Polyurethane Front tyre condition: 80 - 100% Rear tyre type: Polyurethane Dujdpsxfygxjfx Ag Rjl Rear tyre condition: 80 - 100%

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Dodjxfyglspfx Ag Rsul Fork width: 540 mm Mast type: Standard Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Rear tire condition: 80 - 100%

Condition: repair required (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Duedpfx Asn R Diheg Rjl Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Djdpfxexfygfo Ag Rjul Front tyres type: Polyurethane Front tyres condition: 80 - 100% Rear tyres type: Polyurethane Rear tyres condition: 80 - 100%

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Front tyres type: Polyurethane Front tyres condition: 80 - 100% Rear tyres type: Polyurethane Dodpfx Aoxfyf Usg Rjul Rear tyres condition: 80 - 100%

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Djdpfsph Uk Nsx Ag Rsul Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Dsdpfx Agjxfydqs Rjul Rear tire condition: 80 - 100%

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Dedsxfydkopfx Ag Rjul Front tyres type: Polyurethane Front tyres condition: 80 - 100% Rear tyres type: Polyurethane Rear tyres condition: 80 - 100%

Condition: new, Year of construction: 2024, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Djdpfsr D Ntfex Ag Rsul Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 200 mm, mast type: simplex, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Fork width: 540 mm Mast type: Standard Front tyres type: Polyurethane Front tyres condition: 80 - 100% Rear tyres type: Polyurethane Rear tyres condition: 80 - 100% Dodsxfyddepfx Ag Roul