PET blow molding and bottling line

Conteno LINIA DO WYDMUCHU I BUTELKOWANIA PET

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Available from Q1 2026 Technical data Blister module (B 1770) Max. output 700 blisters/min Application area: solid products Max. format range [feed x width] 200 x 284 mm Cartoning module (C 2305/C 2504) Max. output Kdedpfxev D Ipie Abcoi 300 or 500 folding boxes/min. Application area: blisters Max. folding box size [A x W x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm For details, see PDF

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Kodpferkgy Uox Abcjdi

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer Kjdpfequuvrjx Abcedi 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: ready for operation (used), Year of construction: 2008, Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible. Kodpsvcpz Rofx Abcjdi

Condition: ready for operation (used), Year of construction: 2003, A Klöckner blister packaging machine and cartoner are available. 1) Blister machine Klöckner CP200, year of manufacture: 2003, output: 50/min, formats X/Y min./max.: 50mm x 22mm/156mm x 115mm, max. draw depth: 12mm, film width range: 100mm-168mm, forming film diameter: 450mm, lidding film diameter: 240mm. Documentation available. 2) Cardboard packaging machine Klöckner P1500, year of construction: 2003, packaging capacity: 200/min, formats X/Y/Z min./max.: 20mm x 15mm x 50mm/250mm x 115mm x 190mm, machine dimensions X/Y/Z: approx. 5200mm/1500mm/1900mm, weight: approx. 4000kg, control: Siemens S7 PLC. Documentation available. Some parts of the machines have been dismantled. Kdjdpfeucfw Aex Abcji

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. Kdodpferq D Nijx Abcsi The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, Year of construction: 2025, machine/vehicle number: YBW92020, fuel type: diesel, motor manufacturer: Caterpillar 3516B HD, General information Field of application: Construction Weights Empty weight: 18.290 kg Functional Generator capacity: 2.500 kVA CE mark: yes Other information Fuel consumption: 453 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 6,38x2,29x2,37 Production country: DE Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information = Additional options and accessories = Kdjdpfxon An A Ns Abcei - Control Panel

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Kdjdpfokucxlsx Abcoi Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: new, Year of construction: 2025, Horizontal Cartoner 60-ECO – Compact and Efficient Limited space is a common challenge in production environments. Our BASIS 60-ECO horizontal cartoner offers a compact and reliable solution. The machine was presented as an exhibition machine at a trade fair and is now available for sale. The total length including conveyor is only about 4 meters, making it ideal for facilities with limited space. The machine can process up to 60 cartons per minute. - Flexible product infeed adaptable to different products - Optional automatic product timing system - Carton size up to 220 mm (L) × 120 mm (W) × 400 mm (H) - Siemens PLC control and Siemens servo drives - Nordson hot-melt gluing system Kodpemftm Nefx Abcodi Customers are welcome to visit our facility in Germany to test the machine with their own products and set up the system according to their needs. The price is negotiable. We also offer a wide range of horizontal and vertical cartoners as well as flow-wrapping machines.

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Ksdjvddkvjpfx Abcjdi Very good condition