ER-USP 5

ENGEL

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Bdjdpfxe Afw Hye Agkei Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm Bsdpfx Agsx Nr Ryekjdi • Number of Hydraulic Cores (FS/MS): 1 fixed side and 2 moving side • Number of Hydraulic Cascades: 0 • Number of Hot Runner Control Points: 8 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Bjdo Afw Dropfx Agkodi Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: excellent (used), Year of construction: 2006, _M 46_ Bjdezu R H Uopfx Agkjdi _Engel VC 1050/220 HL_ Clamping force: 220 t Year of manufacture: 2006 Control system: CC 200 Screw diameter: 55 mm Screw type: POM Min. mold height: 300 mm Max. opening stroke: 750 mm Max. platen distance: 1,050 mm Ejector stroke: 180 mm Tie-bar spacing (H × V): 860 × 830 mm Platen size: 560 × 600 mm Quick clamp: Yes Core pull: 2× Needle shut-off: 2×

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 9,64,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Bdjdpfxezqbk Ns Agkji

Condition: good (used), Year of construction: 1997, _Engel ES 1050/200 HL_ Clamping force: 200 t Bdsdpfx Aeztadgjgkoi Year of manufacture: 1998 Control system: CC 100 Screw diameter: 45 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Max swept volume cm³ 792 • Screw speed max r/min 250 • Injection rate cm³/s 765 • Spec. Injection pressure bar 2330 • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Clamping system: Tiebarless ENGEL clamping system • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) Bsdjz Dgrpjpfx Agkodi • Including GEKU robot

Condition: new, Year of construction: 2024, The conveyor belt TYPE L is used to feed or remove products and waste of all kinds in vegetable processing and transportation. Bdodpfjrckn Rsx Agksi ProdMa configures the conveyor belt according to the customer's requirements! The ALPHA 30 AA BLUE belt, equipped with guide rails and dividers, is ideal for transporting various foodstuffs and has been verified for the food industry.

Condition: ready for operation (used), Year of construction: 2007, clamping force: 800 kN, Hydraulic injection moulding machine manufactured in 2007. This Engel VICTORY 330/80 Tech features a clamping force of 800 kN and an injection pressure of 1,600 bar. It has an opening stroke of 456 mm and an ejector stroke of 100 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 330/80 Tech machine we have for sale. Contact us for further details. Bdodpfx Age Agvcyskei - Defective / Non-operational (control unit KEBA Kemro CP 251/Z fails to boot and displays error code "8")- Design: Tie-bar-less (Holmlos) - Injection Volume: 154 cm³ - Injection Pressure: 1,600 bar - Opening Stroke: 456 mm - Ejector Stroke: 100 mm - Total Weight: 5,300 kg - Dimensions (L × W × H): Approx. 4,000 × 1,400 × 2,300 mm - Controller: KEBA Kemro K2-200 CP 251/Z (CC 200) - Optional available (not included): Automation, 3-axis handling system, conveyor belt

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Bdedpezx Hkkefx Agkoi terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Bodjzhudkspfx Agksdi

Condition: ready for operation (used), Year of construction: 2015, clamping force: 900 kN, controller manufacturer: ENGEL, controller model: cc300, This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details. Bsdps Af Tyzsfx Agkodi ENGEL Victory 200/90 tech- Clamping Force: 90 tonnes - Injection Unit Size: 200 - Total Operating Hours (Machine): 15,903 h - Operating Hours in Automatic (Robot): 12,086 h - Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP - Centring Diameter: 125 mm EUROMAP - Magnetic Clamping System: Stäubli magnetic clamping plate - Ejector System: Central ejector with ejector safety interface - Heating System: 230 V ceramic cylinder heating bands ENGEL Viper 6 RC300- Maximum Manipulation Weight (Payload): 5 kg- Robot Axis Strokes: X-Stroke: 400 mm Y-Stroke (Single): 1,000 mm Z-Stroke: 2,360 mm C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part) - Max. Vertical Part / Gripper Head Size (TV): 200 mm - Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes) - Part Deposit Side: Machine rear side - Entry Movement: Vertical

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Bdjdpfx Ageu Eu Tnsksi Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: new, Year of construction: 2026, Angled conveyor belt available in various lengths and widths, as well as different speeds. Bsdpelkdbyefx Agkodi - Can be moved on steerable stop rollers. - Angle is adjustable. - Cleat height: 30 mm. - Spring-assisted height adjustment.

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Bsdpfx Agez Nxilskjdi Holmabstand: HOLMLOS Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch