Electric 4-wheel forklift

EP EFL353 S

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 60 h, load capacity: 3,500 kg, lifting height: 6,500 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 3,060 mm, fork length: 2,400 mm, empty load weight: 4,570 kg, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Load center: 5 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: superelastic Front tire size: 28x9-15 Front tire condition: 80 - 100% Rear tire type: superelastic Rear tire size: 18x7-8 Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 280Ah Battery manufacturer: EP Battery year: 2 Chodpfx Ajwzdq Asddef Battery condition: 80 - 100% Positioner with carriage width 1400, side shift left + right Rear work light, front work light, front windscreen, heating, load guard, full cabin, safety light, fan, rear window heating, side safety light, rear work light, rear BlueSpot, rotating beacon

Condition: excellent (used), Complete steel structure of the production hall. Dimensions - 31.5 x 30 x 9.85 m with the corresponding ROOF sandwich panels made of insulating panels. NOTE - hall is WITHOUT WALL PANELS The hall was built in 2010. In excellent condition! The total weight of the structure is approx. 60 tons. The structure is protected with primer and varnish. The outer columns are made of IPE 500 profile, and the middle one is made of IPE 600. The hall has preparation for a crane track. Chjdpjxu E Igsfx Addsf A project and static calculation have been made for the hall. The hall has been disassembled and transportation and loading can be arranged.

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Chsdpsimwp Ssfx Addsf Production 2022 Machine available on request New machine

Condition: new, Holzkraft minimax t 45c table router (5502044) Low-priced, with rigid milling spindle and cast iron work table. - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3500 to 10000 min¯¹ - Milling spindle with right-left rotation - Large dimensioned milling unit made of grey cast iron, directly fixed to the table - With suction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5,0 kW - Standard arc milling protection hood - Quality Made in Italy Equipment details Cast iron milling unit - Directly mounted on the milling table - Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life Chsdpskyt Uljfx Addof - 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors - Equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence - Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. - The integrated suction connection ensures a clear view Milling table opening - A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - versatile integratable stop for bridging the tool gap - enables safe working even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimum protection on every router table, individually adjustable to the task at hand - Universal basic elements for mounting AIGNER safety and working devices - Quickly adjustable due to simultaneous clamping of all individually adjustable rods - Made of high quality aluminum - Can be used universally on all HOLZKRAFT table routers - 500 mm: Item no.: 5851000 - 650 mm: Item no.: 5851650 TECHNICAL DATA Dimensions and weights Weight (net) approx.: 240kg Suction connection Suction port diameter: 2 x 120mm Work table Working table length:1000mm working table width: 575mm table height: 900mm Set up information Required space length: 1945mm Required space width/depth: 920mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Working area width/depth: 1600mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage: 400V Mains frequency: 50Hz Power drive motor: 5,0kW Milling spindle useful length of the spindle: 100mm spindle protrusion max. over table: 130mm Spindeldrehzahl(en): 3500/7000/10000min¯¹ spindle arbor diameter: 30mm Milling tool diameter max. Tool diameter max. lowerable: 180mm Tool diameter max. profile milling: 210mm SCOPE OF DELIVERY - arch milling protection cover - aluminum stop jaws Holzkraft dealer - accessories available on request!

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads Codpjhp N R Iofx Addohf - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), Panhans 240A spindle moulder (bottom spindle) Spindle diameter: 30 mm Spindle length: 130 mm Variable spindle speed: 3000/4500/6000/9000 rpm Electronic spindle height adjustment Chsdpjxg Iz Hsfx Addjf Electronic fence adjustment Electronic angle adjustment SCM 4-roller power feed

Condition: used, Year of construction: 2001, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 245 mm, working height: 100 mm, type of input current: three-phase, – Year of manufacture: 2001 Chjdpfewtzrhsx Addef – Optimization – Cutting to line – The machine has additional tables, allowing a maximum cutting length of up to 6500 mm; currently reduced to 3400 mm – 8 cutting beams TECHNICAL SPECIFICATIONS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s2 – Optimization according to length and value – Pneumatic material clamping – Five ejection units – Intelligent, controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 140mm Number of spindles 7 Arrangement of spindles Bottom 7.5kw Right 7.5kw Left 7.5kw Right 7.5kw Codorup Igepfx Addjhf Top 7.5kw Bottom 7.5kw Universal 360° 7,5kw ATS control system Corrugated table Pulling rollers in the work table driven Feed on cardan shafts Feed motor 5.5kw Feed speed 6-36m/min Total power 61kw

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Csdpfx Adjvvizkjdshf

Condition: as good as new (ex-display), Year of construction: 2024, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Cjdpfx Aeuzkxxjddohf Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg