Sideloader

Fantuzzi SF 40 U

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 10,346 h, load capacity: 4,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,750 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Standard Tjdou Ac A Sopfx Abteb Technical condition: normal

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,000 kg, lifting height: 25,000 mm, Year of construction: 2023, operating hours: 1,336 h, total length: 8,830 mm, construction height: 3,150 mm, drive type: Diesel, load capacity: 6,000 kg, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Technical condition: very good Tjdpfx Abjumvfyjtjb Description: The Magni RTH 6.25 is a versatile rotating telescopic handler for assembly, lifting, and material handling on construction sites and in industrial applications. With a lifting height of up to 25 m, a lifting capacity of 6,000 kg, a large reach, and a rotating upper carriage, this machine is ideally suited for working at height and in confined spaces. Robust, powerful, and easy to operate. High off-road capability for a wide range of applications. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,230 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 3,350 mm, fork carriage width: 1,220 mm, fork length: 1,200 mm, empty load weight: 6,350 kg, total length: 4,300 mm, drive type: Treibgas, construction width: 2,000 mm, Sideloader Load center of gravity: 600 Fork width: 170 mm Fork thickness: 55 mm Mast type: Standard Condition: Ready for use and fully functional Tedpfx Abowaca Tjteb Technical condition: Very good Front tires type: Pneumatic Front tires size: 27x10-12 Rear tires type: Pneumatic Rear tires size: 27x10-12 Description: In addition to this Fantuzzi model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this SF40U. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Telescopic forks Heating, full cab Platform height: 820 mm

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Tsdpfxju Rni Hj Abtsb Cutting zone lighting Stroke counter Machine feet *

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Todpfxep Stgns Abtjb Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge Todpfx Asuagxpsbtsb - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Tedsga T Dpspfx Abtsb Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,274 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Technical condition: very good Todsvgi A Nepfx Abteb Description: The Magni RTH 8.27 is a powerful rotating telescopic handler for assembly, lifting and material handling on construction sites and in industrial applications. With a lifting height of up to 26.6 m, a lifting capacity of 8,000 kg, the continuously rotating upper carriage and all-wheel drive, the machine is ideal for heavy loads, work at height and operations on difficult terrain. High reach and excellent off-road capability. Robust, powerful and easy to operate. Further information and a non-binding inquiry can be found on our website - Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sale, service & repair. With us, you get everything from a single source. Lease-purchase, financing and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2017, For sale: CNC bending machine CIDAN FORMA 40 Multifold Condition: Used. Operating hours: 6568 hours. Manufacturer: CIDAN Machinery AB (Sweden) Model: CIDAN FORMA0 40 High-end CNC-controlled sheet metal bending machine designed for the precise and fast production of various shaped profiles. Tsdpfx Abjy U I I Eetob Technical specifications: Year of manufacture: 2017.11 Total weight: 5660 kg Control: CNC with PROLINK Operating hours: 6568 h Table height adjustment: from 0 to 36 mm Mechanical bend compensation adjustment (Crowning system) Working length: 4100 mm Max. bending thickness: 2.5 mm Equipment: Automatic rear support – flexible U-shape model (4.5 m x 1.2 m x 1.74 m) Swiveling upper beam – COMBI MULTIFOLD type Segmented tools for lower and bending beams with SBG 15 table CNC control with PROLINK graphical user interface (intuitive, easy programming) Quick change system for tools High accuracy and repeatability Application: This machine is designed for bending, forming and profiling sheet metal. Ideal for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm Tedpfx Aeq Dta Ijbtob 8mm distance between columns . mm