Cable stripping maschine ,wire stripper

GRS Feinwerkmechanik GRS 4 Neues Modell

Condition: used, Eldan Granulator HG129 Hnsdpjt Uyvrofx Anvjn

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Hnodpon Tpmujfx Anvon

Year of construction: 2023, condition: new, Chillers with different refrigerants and low GWP values can be ordered ex works. We will be happy to advise you on the various refrigerants, application purposes, installation conditions. Hnodpfx Anohtfggovjn

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Hnsdpfxsq E Ti Hj Anvsn

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Hnjdpfxoytdkfj Anvsn Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Discharge conveyor overhauled, magnet unit replaced. Tools 85%. Service newly performed. New paintwork. Immediately ready for use.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Hnsdpfxov T I Evj Anvsn Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: GLT135SHE -2200333157, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,428 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.7 m³/h, pump pressure: 2.51 bar, total width: 2,190 mm, total length: 4,530 mm, total height: 2,425 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller, Type: Galaxy GLT 135 SHE Manufacturer: MTA S.p.A. Hnedpfx Aexqnydjnven The Galaxy GLT 135 SHE units are compact air-cooled chillers designed for outdoor installation (operational from -20°C to +43°C). Features include a plate evaporator, scroll compressors, control and switch cabinet, compressor shut-off valves, equipment suitable for low ambient temperatures down to -20°C (EC fans), P2 pump, 510-liter buffer tank, electric frost protection heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.7 Available pump pressure (bar): 2.51 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Capacity steps (%): 0-17-33-50-67-83-100 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 167.7 Max. current (A): 273.3 Starting current per circuit (A): 421.8 Protection class: IP54 Dimensions: Length (mm): 4530, Width (mm): 2190, Height (mm): 2425 Weight (kg): 4428 Connection: Victaulic DN 125 Serial number: 2200333157 Year of manufacture: 2018 Condition: Cosmetically: 2, Technically: OK & tested Used Price: on request in EUR (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request, a functional test of the chiller together with the buyer prior to collection at the Nettetal branch. Used machines may have visual imperfections due to previous use. (Subject to technical changes and prior sale!)

Condition: reconditioned (used), Total length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm, max. tensioning force per saw blade 6.5 tonnes If required: Hnsdjr Ezyxepfx Anven Magnetic gauges with 3 tubes, 2 magnets and 1 hole for insert sheets are in stock for the following wood dimensions: 18/20/24/25.5/38/40/45/48/50/58/60 and 75 mm, as well as inserts with 12 mm Ø fixing bolts in various widths from 2 to 12 mm

Year of construction: 2022, condition: new, Cable stripping machine G.R.S. 9 Hjdpfx Anohpcnqovsnn This incredible machine strips 33 meters cable per minute. You need 380 volts and 3 kW, but the processing capacity of about 2 mm to 80 mm, is reasonable. With a mass of 405 kg, you can move the machine short distances on it's own wheels - for longer distances a other transport method is necessary. The criteria for this machine: Very fast and reliable processing of cable thicknesses between 2 mm and 80 mm. Technical Data: Cutting speed: 33 Meter / min. (forward) 23 Meter / min. (backwards) Processing capacity: Ø 2 mm — Ø 80 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 405 Kg Dimensions in cm: 108 × 85 × 120 Color: blue

Year of construction: 2015, operating hours: 292 h, condition: used, Empty weight: 14.400 kg Chassis type: rigid Dimensions of cargo space: 620 x 245 x 250 cm General condition: very good Technical condition: very good Visual appearance: very good Delivery terms: EXW Hnedpoxy Rf Ujfx Anvon Production country: CH Please contact Vink Machinery for more information Menzi Muck M545 * 2015 * Diesel drive * Demo model * 292 operating hours * 4x4x4 * Air conditioning * Independent suspension