Thermoform, Fill and Seal Line

Hassia THL 28/22

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Knodoyvz Afspfx Aklja Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW Knedpfx Aksxbcudjlja * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: good (used), Toyo Jidoki pouch packing machine with vacuum option. Has come from major UK food factory but not used for at least five years. Ksdpfouf A Idsx Aklona

Year of construction: 2001, condition: used, • Heating plate size (mm): approx. 1500 x 2700 • Usable area max. (mm): 1250 x 2450 • Loading side (mm): 1500 Kodpfx Askt N Huoklona

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Kedpfsw Rpzqjx Aklona Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Stephan um40 with a jacketed 40 litre cooking vessel. With a s blade cutter and mixer with sidewall scrape. Kjdpfx Ajxdfcceklsna

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml Knedpfx Akjxdbwislea The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: Ksdpfx Ajtndpzeklona - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Kodpfx Akexlif Rsljna Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity: 25,000 l/h. Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. - Including original documentation. - Can be operated via Profibus central system - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. - Excellent condition. Ksdpfx Akswf Iq Uolsna