Float and Laminated Glass Cutting Line

HEGLA ProLam 46 LTR-TD

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 1600.4 Max. Glas-height: 1.600 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Fodpfxevxf Uxj Ag Rsft Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 200300381, total length: 5,220 mm, workpiece weight (max.): 3,000 kg, Glass Washing Machine Bavelloni LV1604-20 Operating direction: right to left Ffsdpfsvkxzpox Ag Rot Illuminated discharge area for quality control. 3 washing zones, each with its own water tank: - First tank for brush pair No. 1 is electrically heated and filled with detergent/water mixture. - Second tank for brush pair No. 2 contains cold water for rinsing. - Third tank is for washing zone 3, equipped with spray nozzles for rinsing with pure water. A drying zone follows, utilizing air nozzles powered by a fan. The machine is designed for glass heights up to 1600mm but is open at the top, allowing the transport of taller glass panes. Glass thickness: up to max. 20mm Infeed section length: 1400mm; main machine length: 1820mm; outfeed section length: 2000mm. Automatic stop of the feed rollers when the glass reaches the end of the outfeed section. Operating manual, spare parts list, and wiring diagram are available. The machine has been regularly maintained and is operational; it will be dismantled in calendar week 31/32 of 2025. For further details and dimensions, please refer to the photos or feel free to inquire. Demonstration and inspection can be arranged by appointment. Dismantling, loading, and transportation should preferably be organized by the buyer, but can be handled by us upon agreement. A forklift and various assisting tools can be provided. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee is given for completeness or accuracy! Subject to prior sale. Sold without any warranty or guarantee, as viewed.

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) 2000x2500mm(78 "x98") 60mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Rotating inclination changer with measuring unit 1080 FPS-25/20U2 gas press / surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 cork applicator / spacer cork 1110 VFL-1/20D Sealing robot Incl. shapes + triple glass 2x 1120 DOS-1PUD Mixing incl. 2 x 200L + Hardener press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension : 350 x 180 mm Max dimension : 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Level: not possible, step nozzle is missing Georgian Bars: No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min dimension : 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Step: not possible, step nozzle missing Sprouts: No Gas type: Argon Models: according to the LIsec model catalog radius limitation 250 mm The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) 2000 x 2500 mm(78 "x 98") 60 mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Drehbarer Neigungswechsler with messeinheit 1080 FPS-25/20U2 gas press / Surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 Korckapplicator / Spacer cork Fedpfx Ajrr Sy Aeg Reft 1110 VFL-1/20D Sealing robot IncL. Shapes + Tripple glass 2x 1120 DOS-1PUD Mixing inkcl. 2 x 200L + Harderner press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension: 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Level: not possible, step nozzle is missing Gorgian Bars : No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min. dimensions: 350 x 180 mm Max. dimensions: 2000 x 2500 mm Total ISO thickness: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Step: not possible, step nozzle missing Georgian bars: No Gas type: Argon Models: according to model catalog LIsec radius limitation 250 mm Sealant: PU

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual Ffjdpfsha E S Tjx Ag Rst - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: excellent (used), Year of construction: 2008, Maximum cutting lenght : 3000 mm Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Ffjdpfx Asxc Tyysg Rot Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying WINDOWS 2000 Software

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove Ffsdpfxjwhu Hhj Ag Rot

Condition: used, functionality: fully functional, Year of construction: 2014, 1600 mm open top vertical glass wasching+ drying machine glass thiknss : 3 - 19 mm inlet conveyor : 2 m outlet conveyor : 2 m total lenght : 6 m total power : 9 Kw Fsdpfjwwivpox Ag Rsft Machine fully fonctional in very good condtion

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm • Machine length: 6470 mm • Machine height: 2610 mm • Machine depth: 1110 mm • Weight: approx. 2800 kg • Price on request Ffedpfju Sm H Hex Ag Ret

Year of construction: 1996, condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Fjdpsugv R Isfx Ag Rjft

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Max. working width: 1.300 - 4.500 mm Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection Fsdpowd Hbiefx Ag Reft - Inkl. turning station