L-glass storage rack for large dimension

Hegla TL 50-3V

Year of construction: 2010, condition: excellent (used), machine/vehicle number: RESHGFW, DEMAG KBK crane canopy crane runway - various cranes with different dimensions in stock - please inquire ! Payload / lifting capacity 125KG - 1000Kg - please ask Technical data of the system: Crane runway made from Demag KBK2/KBK2-L rails with raised trolley - crane girder is between the two runways for maximum lifting height Ksdpfsrwi Slox Aadodw System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable towing, brackets/hangers etc. incl. chain hoist Crane is dismantled and immediately available Various cranes are available, pictures are for illustration purposes only Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2008, condition: ready for operation (used), A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible. Kdedpfx Aswr Dv Headjw

Condition: new, plate thickness 2,5 mm Kodpfx Aefv H Ehoadodw roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Kdedpfoh Uudvex Aadow Number of drawers - 30 Size of panes - 2550 X 3210 for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track We export our products all over the world.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, HEGLA, ProLam 46 Autom. Laminated Glass Cutting Line Year: 2014 In very good technical condition. Inspection is possible by appointment. Available: NOW Kedsv I Ed Espfx Aadodw

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries. Kdodpeha E S Tofx Aadjw

Condition: used, Year of construction: 2009, No. 3228 Cutting and processing center Schirmer BAZ 1000-G6NU Tandem Used, year of construction 2009 G6 module Center seal punch Drilling and trimming unit VU saw 90° saw Belt conveyor Horizontal circulation buffer Automatic steel infeed station Bar processing center Screwing stations Drilling stations Milling stations Closing part setting stations Bar sorting system Sale on behalf of customer, ex location Slovakia, without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Ksdpewluhmofx Aadodw Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Kdjdpfx Ajwd Hbijadow Double Edger Max. working width: 1.300 - 4.500 mm Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection - Inkl. turning station

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 200300381, total length: 5,220 mm, workpiece weight (max.): 3,000 kg, Glass Washing Machine Bavelloni LV1604-20 Operating direction: right to left Illuminated discharge area for quality control. 3 washing zones, each with its own water tank: - First tank for brush pair No. 1 is electrically heated and filled with detergent/water mixture. - Second tank for brush pair No. 2 contains cold water for rinsing. - Third tank is for washing zone 3, equipped with spray nozzles for rinsing with pure water. A drying zone follows, utilizing air nozzles powered by a fan. The machine is designed for glass heights up to 1600mm but is open at the top, allowing the transport of taller glass panes. Glass thickness: up to max. 20mm Infeed section length: 1400mm; main machine length: 1820mm; outfeed section length: 2000mm. Automatic stop of the feed rollers when the glass reaches the end of the outfeed section. Operating manual, spare parts list, and wiring diagram are available. The machine has been regularly maintained and is operational; it will be dismantled in calendar week 31/32 of 2025. For further details and dimensions, please refer to the photos or feel free to inquire. Demonstration and inspection can be arranged by appointment. Dismantling, loading, and transportation should preferably be organized by the buyer, but can be handled by us upon agreement. A forklift and various assisting tools can be provided. Kdsdpfx Aaevkxzpedew All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee is given for completeness or accuracy! Subject to prior sale. Sold without any warranty or guarantee, as viewed.

Condition: excellent (used), Year of construction: 2011, Lisec glass washer RL-20VN, left to right, consisting of: RTVB-38/20WE, washing machine inlet conveyor 3800 mm Ksdjtpux Sopfx Aadedw RTL-20VN, washing machine with 6 brushes for low-e, including a full demineralization plant as seen on the photos RTVB-32/20ST, washing machine outlet conveyor 3200 mm The machine can still be seen in operation and will be available from end of May