Electronics / Drive technology

HEIDENHAIN HR 330 - Handrad

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center Bwodpfew Ei E Hex Agkoi DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z SK 40 spindle taper 20 bar internal coolant supply 60-position tool changer Chip conveyor Renishaw probing kit for SIEMENS control

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø Bsdpfx Aew Intaogkswi --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: new, Year of construction: 2025, Universal milling and drilling machine. X 600 mm Y 500 mm Z 450 mm - Heidenhain TNC 620 with ABENE/HEIDENHAIN software for easy operation - 2-stage gearbox, with frequency-controlled spindle motor 55 - 4,000 rpm. - 1 LED machine light 24 V / 70 W - HR-510 electronic handwheel for X, Y and Z axis - Complete electrical equipment for 400 V 3 phases 50 Hz. - Transformer for 24 V control voltage. - All fuses in the electrical cabinet are automatic. - Mechanical longitudinal, transversal and vertical feed - AC motor spindle, 7,5 kW - Spindle for Z axis, diameter 40 mm, ball screw. - Spindle for X and Y axis, with backlash free ball screw. Ø 32 mm. - All guides are hardened and ground. - An automatic central lubrication system lubricates all guides and ball screws. ball screws. - AC servo motors with infinitely variable control by Heidenhain TNC 620. - Chip tray, extendable - Collision protection monitoring in all axes by electronic threshold value monitoring - Keys, operating instructions, spare parts catalog and acceptance protocol. - Mechanical handwheels in all axes (option) - Table enclosure - Key switch to select between manual and automatic mode. We offer you a machine that is ideally suited for education and training. Our machine is characterized by its robust construction and allows precise machining of the workpieces. Bwedpfxei Hqhmo Agkoi Thanks to its features, it is ideal for use in the training workshop or in professional training. The machine makes it possible to gain practical experience in CNC manufacturing and to deepen the understanding of CNC technology. Our machine is located in our warehouse in Pfullingen and can be inspected at any time. We would also be happy to allow you to perform a test machining to demonstrate the machine's capabilities. You will quickly discover how easy and efficient our machine is to operate. We offer you the machine at a fair price. Feel free to contact us for more information or to request a quote. We are confident that our machine will meet your requirements and look forward to your inquiry.

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces Bsdpfxety A Eho Agkjwi - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Bsdpfx Agsxapdcjkewi Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy acc.to DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: excellent (used), Milling Machine MAHO MH 600 W Bwsdpfx Agsw I T Rwokei * Max. travel in longitudinal X-axis: 600 mm * Max. travel in transverse Y-axis: 400 mm * Max. travel in vertical Z-axis: 400 mm * Clamping surface/table dimensions: 900 x 480 mm * Spindle power: 5.5 kW * Spindle taper (ISO): ISO 40 * Speed range: 40 - 4000 rpm * Digital readout: Millplus CNC * Weight: 2900 kg

Condition: used, Year of construction: 2018, Operating hours: 600 h Technical Data: Travel range X/Y/Z: 450 / 350 / 400 mm Distance spindle nose to table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Feed rate X/Y/Z: 10 - 2000 mm/min, stepless Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (fixed angle table) Max. table load: 30 kg (fixed angle table) Vertical milling head: Speed range: 10 - 5000 rpm Power: 10 kW Bsdpfxjxu I Txo Agkowi Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2,270 kg Equipment: - Swiveling control panel - Digital display based on Sinumerik 828D - Forward/reverse rotation of main spindle - Linear guides - Milling spindle with quadruple radial/axial bearing - Main motor with spindle brake - CE compliant

Condition: new, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, number of slots in tool magazine: 30, controller manufacturer: Siemens, total height: 2,826 mm, total length: 2,900 mm, total width: 2,239 mm, overall weight: 6,200 kg, table length: 1,300 mm, table width: 600 mm, controller model: 828D + Shopmill, coolant supply: 25 bar, distance table center to spindle nose: 910 mm, rapid traverse Z-axis: 36 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rotational speed (max.): 10,000 rpm, rotational speed (min.): 100 rpm, spindle nose: SK 40, table load: 1,400 kg, tool diameter: 76 mm, tool length: 300 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Including equipment such as: Robust roller guides on all axes Spindle cooling system (oil cooling) Fast double-arm tool changer with preselection and vertical magazine with 30 tool positions Hinged belt chip conveyor Coolant through the spindle with 25 bar high-pressure pump Air blast through the spindle Coolant gun Movable electronic handwheel Bwedpfx Agsu T Ir Roksi

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake  Bwodpfx Agoyiafbeksi   X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 40 h, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Bjdpox D Havsfx Agkswi Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling