Component

Heidenhain UVR 160DW . 560 106-01 SN:28293633G - generalüberholt mit 3 Monaten Gewährleistung-

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UVR 160DW, part number 560 106-01, SN: 28293633G, offered on an exchange basis (exchange service). The unit has been professionally refurbished, fully tested, and comes with a 3-month warranty. It is 100% functional and the scope of delivery is as shown in the photos. Please note: For the exchange process, your returned defective unit must not have any mechanical damage such as cracks or breakages, as these are irreparable. If such damage is present, an additional charge of €500 including VAT will be invoiced. Hnsdpfsvknabjx Adwog

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Hnjdpfev Drigox Adwog Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: good (used), throat depth: 1,600 mm, drilling capacity: 50 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 28 rpm, quill stroke: 310 mm, spindle mount: MK 5, power: 4 kW (5.44 HP), Armlength: 1600 mm Drillingcapacity steel: Ø 50 mm Tappingcapacity steel: M50 x 1,5 mm Hnedpott I T Iefx Adweg Spindle nose: MK 5 Spindle speeds: 28 - 2500 Rpm Spindle feed: 0,05 - 2 mm/rev. Spindle stroke: 310 mm Spindle -> Floorplate: 1500 mm max Drilling table: 1000 x 750 mm Size floorplate: 1820 x 986 mm Featured with: - Cooling unit - User manuals Spindle motor: 4 kW Country of origin: Czech Republic Machine weight: 4500 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Hnjdpfx Aox D Epcedwjg Dimensions Machine Depth 2050 mm

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2021 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Hedpfoxybxfjx Adweng Mainspindle: Technology:Belt-driven spindle Speed:3.000 rpm Power (max.):42 kW Torque (max.):858 Nm Bar capacity:91 mm Workpiececlamping:3-Jaw chuck, Samchully HS-12 Toolcarrier (X/Z): Technology:Turret with 12 stations Taper:BMT65 Tooldive:5.000 rpm, 5,6 kW, 40 Nm Movement in X/Y/Z:245/1.040 mm Rapid travers in X/Y/Z:24/30 m/min Tailstock: Technology:Towed with hydraulic Quill Cone:MT5 Quill-ø:110 mm Stroke:100 mm Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Oilskimmer and Highpressure, 10bar Toolmeasurement:Automatic Measuringarm, Marposs Rawmaterialfeed:Interface Barloader prepared Finished Partremoval:Parts catcher with Box Oilmistseparation:Interface machanical prepared Setup operations:Electronic Handwheel Further Equipment:Rinsing pistol

Condition: excellent (used), Year of construction: 2004, operating hours: 18,000 h, functionality: fully functional, turning diameter over cross slide: 300 mm, turning diameter: 246 mm, spindle motor power: 20 W, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 50 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, total height: 1,890 mm, total length: 3,890 mm, total width: 1,553 mm, overall weight: 3,500 kg, For sale: Gildemeister CTX 320 Linear lathe, year of manufacture 2004. The lathe is fully operational and well-maintained, with regular servicing throughout its entire usage period. It is possible to connect and inspect the machine on site. Additional advantage: Very low running hours – approximately 18,000 operating hours. For this model, this is an exceptionally good result; the machine has retained its precision and smooth operation. Technical specifications Machining range: Working area Maximum turning diameter: 246 mm Swing over bed: 400 mm X-axis travel: 210 mm Z-axis travel: 450 mm Distance between centers: 600 mm Main spindle Bar capacity: 50 mm Spindle diameter: 100 mm Chuck size: 170/210 mm Power: 20/16 kW (40/100% duty cycle) Maximum torque: 200 / 155 Nm Speed range: 20 - 6000 rpm Axes and feed Rapid traverse: X: 60 m/min Z: 45 m/min Turret/tooling Tool stations: 12 positions Tool interface: VDI30 Tailstock Hnsdex A T E Aepfx Adwsg Quill stroke: 400 mm Taper: MK4 Force: 400 daN Additional information CNC control: Heidenhain Plus iT Machine weight: approx. 3500 kg

Condition: used, Year of construction: 2010, We will sell a STORK 900 injection molding machine, injection molding machine parameters below: Year of production: 2010 Installed power: 132KW Maximum injection speed: 400mm/s Maximum injection pressure: 1650bar Hnjdpepmr H Ijfx Adwjg Screw diameter: 98mm Maximum injection weight for PP: 3180g Closing force: 9000KN Clearance between columns: 1010x1010mm Minimum form height: 300mm Maximum table opening: 1190mm Maximum height of ejector pin: 700mm Diameter of centering pins: 250mm Maximum ejector stroke: 300mm Dimensions of mold mounting plates: 1570x1560mm Unit volume: 5857g Mouthpiece opening diameter: 8mm The machine is equipped with a Sytrama robot. The injection molding machine in good condition is still used in current production, it is possible to see it on site or send a video with an example of operation.

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 Injection Molding Machine Year of manufacture: 2015 Very compact, hydraulic, three-plate clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mold space. High-precision and wear-resistant linear guides guarantee maximum mold longevity and increased machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, clamping, injection) that can be adapted to specific applications. The highest plasticizing performance and optimal melt quality are ensured by selecting process-appropriate components. Servo-electric metering drive and state-of-the-art valve technology guarantee energy-efficient operation. Technical parameters Certification: CE in accordance with EU Directive 2006/42/EC (EN 60204, etc.) Mold installation height: 600–1050 mm Injection unit drive: metering axis speed up to 420 rpm, torque 2400 Nm Injection unit Injection speed: maximum dynamics thanks to high-performance servo valve technology Screw: 62 mm diameter, 25.2D length, version B – Three-zone screw made of hardened, wear-resistant tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Clamping unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology for maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide bushing R = 35 mm, through-hole D = 5 mm Mold plate hole pattern: Euromap standard Centering and ejector system Centering on nozzle-side plate: D = 125 H7 x 20 mm (Euromap) Through-hole in moving platen: D = 80 mm Ejector hydraulics positioned on the operator offside Ejector hole pattern: Euromap Ejector controlled Mold hydraulics 4 hydraulic circuits for auxiliary functions (ejector, cores, nozzle pins) Electrically controlled check valves in circuits A + B Free configuration of functions with position protection Nozzle hydraulics with needle shut-off 4 hydraulic circuits Flow speed and pressure manually adjustable Hnsdpfx Adexl Ul Aswjg Open/close function Special software: cascade control Pneumatics and cooling Water cooling battery and hot runner circuit – 4-section, switchable Pneumatics: 2x 3/2 valve, capacity 890 l/min Location: on operator offside at nozzle-side platen Electronics / Software / Interfaces Frequency: 50 Hz Power supply: 400V, 3P + N + E, tolerance ±10% (transformer required for larger deviations) Surge protection Mold heating: – 4 circuits at 3.3 kW each – 8 circuits at 0.75 kW each Connectors: HAN 16E for power and sensors, Euromap 14 Sockets: – 2x 16A CEKON (main switch-controlled) – 1x 32A CEKON with RCD (FI) switch Interfaces: – Euromap 15 – full implementation (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control of 5 heating/cooling units) – Euromap 67 (robot interface for ejector and hydraulics) External fault signals: 2 inputs in control cabinet Operator identification: PIN

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 2791, throat depth: 1,300 mm, drilling capacity: 50 mm, We are selling our radial drilling machine, which is still in use and in working order. Weight approximately 2.5 tons. Hnjdpfx Aowku H Todwjg Will be gladly loaded to the buyer; shipping/transportation costs are borne by the buyer.

Condition: excellent (used), Year of construction: 2010, Netstal SynErgy 2400-1700 Injection Moulding Machine Year of manufacture: 2010 Clamping Unit: Clamping force [kN]: 2400 Min./max. mould height [mm]: 260–600 Maximum opening width [mm]: 1110 Maximum ejector stroke [mm]: 110 Injection Unit: Screw diameter [mm]: 62 – 25D Injection volume [cm3]: 749 Injection weight PS [g]: 696.57 Injection pressure [bar]: 2296 Electrical-hydraulic equipment: Hnsdpfx Asxvcgpsdwog Rated pump motor power [kW]: 75 Heater power [kW]: 37.8 Dimensions and weight: Net weight with control cabinet [t]: 15.8 Languages: Polish, German, English, French