Sewage sludge dryer

jumbo SPEED Rotationstrockner STR-12A

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Pgsdpfx Agjwp Rqfe Tji The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. Pgsdpfxovu D Dws Ag Tei The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor.

Year of construction: 2024, condition: new, For sale: drying system - 1T 184 TPR Model, (Mobile Conveyor Belt) We offer a high quality drying system, ideal for drying wood sawdust, produce, recyclable waste, food ingredients. Below we present the design details and features of the drying system: Design data: - Product handled: sawdust - Physical appearance:Loose - ˃ 1 mm - Initial moisture content: 55%, 50%, 40% - Final moisture content: 12% - Wet production: 4,00 t/h, 4,50 t/h, 5,65 t/h - Dry production: 2,05 t/h, 2,55 t/h, 3,85 t/h - Drying air temperature: 80 °C - Thermal energy consumed: 1.800 - 2.350 kWh - Max. evaporated water per hour: 1.800 - 1.955 Kg/h Pjdpfx Aoua D U Isg Tsgi Installed electrical power: - Feeding cooker: 5,5 kW (x2) - Drying belt: 2,2 kW - Unloading equipment: 5,5 kW - Exhaust fans: 22,00 kW (x3) - Cleaning fans: 4 kW (x2) - Total installed power: Approx. 92.70 kW Water-to-air heat exchanger: - Recommended thermal capacity: 2.600 kW - Water temperature: 90 °C on - 70 °C off Dimensions: - External dimensions of dryer frame: Approx. 22 m long, 6 m wide - Drying belt surface: 72 m² - Unloading equipment: 5,500 mm x Ø 300 mm - Feeding trough: Approx. 1.00 m³ - Number of exhaust fans: 3 - Number of water-to-air heat exchangers: 4 Technical description: - Feeding system: Adjustable pulley conveyor with level sensor. - Drying table: Modular design with inspection windows. - Drying belt: Polyester fabric conveyor belt with steel rollers. - Thermal insulation: 50 mm thick rock wool with Magnelis® cladding. - Mixing brush: Painted steel mixing brush. - Base frame: Folded steel plates with reinforcing profiles. - Drying belt cleaning system: High pressure air and water spraying system. - Water spraying system: Closed circuit water spraying system. - Stairs and access: Secure access stairs and walkways. - Unloading equipment:Steel pulley unloader with motor. - Heat exchangers: High efficiency steel finned heat exchangers. - Air exhaust fan: Centrifugal fans with vibration damping connections. - Heat recovery: Hot air return duct. - Machine enclosure: Prefabricated enclosure made of insulated sandwich panels. - Dust filters: dust filters on the air intake grille. - Paint cycle: Phosphating, passivation, polyester powder coating. - Electrical control panel with PLC: SCHNEIDER electrical and PLC components, HMI control panel. - Humidity control system: PT 100 temperature sensors. - Remote service: direct connection via Internet. - Input and output humidity sensors: 4-20 mA adjustment. For further information and quotation please contact us! We look forward to your interest! Price: 530.000 Eur

Condition: used, functionality: unexamined, The belt dryer was not put into operation by me; it was purchased used. It is being sold as used, without warranty or liability. Pgedpeyf Uhlofx Ag Tsi The right switch cabinet door is damaged (hinges torn out).

Year of construction: 2019, condition: refurbished (used), Raptor of the company Pamminger model 2350 DBS machine was in use for 1 year Pgedpsic U Eksfx Ag Tji incl. lifting station (blue) and if required with driven roller conveyor. Cover sheet function Set program with corner edges.

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: 439944, power: 335 kW (455.47 HP), Hammermill 1500RPM 335 kW and air separator for sale. Pgedsxby Tkjpfx Ag Tei

Condition: new, Year of construction: 2021, functionality: fully functional, power: 315 kW (428.28 HP), CPM pellet press for the production of 6mm wood pellets; output approx. 4–5 tons/hour; including roller and 1 die; including CPM continuous mixer type LL 7.5kW. The plant is in its original packaging and stored in a dry warehouse. Inspection possible at any time. The photo is for illustrative purposes only. Pgjdpfx Aeyaavkeg Tsi

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Pgjdpfx Ageyr Aiqe Tei

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. Psdpsx S Ibgofx Ag Togi For additional information, please write on Whatsapp.

Year of construction: 2015, condition: excellent (used), The Cyklop CST 940 is a fully automatic stretch wrapping machine that ensures fast and reliable pallet wrapping at high volumes. Beneath the casing is an Atlanta Stretch Mytho A – a model renowned for its robust construction and dependable operation. With a capacity of up to 45 pallets per hour, it is an excellent choice for logistics centers, warehouses, and production facilities seeking to combine efficiency with operational reliability. Thanks to its minimal use and pristine condition, the machine gives the impression of being brand new, but comes at the price of a pre-owned unit. Operation is simple via a user-friendly 5.7” touchscreen featuring multiple program selections, and the machine can be customized for different load formats and wrapping requirements. With adjustable speeds for both the rotary arm and film carriage, as well as various pre-stretch levels, a flexible solution is created, delivering high performance and secure, stable packaging. The solution can be adapted and extended upon request, as additional conveyor sections of the same model can be offered. Compressed air required. Freight and installation, if applicable, are not included. Pgodpew U Rd Usfx Ag Tji