Parts cleaner

Kärcher PC 60-130 T

Condition: excellent (used), Kärcher Type: PC 60/130 T / with oil separator (skimmer) attachment kit Kärcher parts cleaner Manufacturing, maintenance, workshops, metal processing - automatic parts cleaners have many applications. The parts cleaners work on the basis of aqueous solutions without solvents. The top loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm in diameter, 310 mm in height and 130 kg maximum weight. The items to be washed are cleaned using three-dimensionally arranged flat jet nozzles using solvent-free, heated Kärcher water-based cleaning agents. The items to be washed rotate on an electrically driven rotating basket during cleaning. The Parts Cleaner PC 60/130 T offers numerous practical details such as an integrated small parts drawer that reliably catches loose parts and coarse dirt particles. Equipment: Operating hour meter Holding ring (stainless steel for turntable) Swivel castors, 2 lockable Timer for cleaning cycle Water level control Oil separator (skimmer) attachment kit See Figure 7 Ffedpfxsfu Ikws Ag Rjt The oil separator (skimmer) extends the service life of the cleaning solution considerably. If the cleaning solution has settled, for example overnight, the oil that has been added floats to the top. The skimmer can now be switched on to remove this oil from the cleaning solution. Specifications Technical data: Pressure (bar/MPa) 1.5 / 0.15 Flow rate (l/h) 4500 Connected load (kW) 5.5 Working diameter (mm) 600 Usable height (mm) 310 Housing / frame stainless steel (1.4301) Tested (by) according to CE Heating power (kW) 4.5 Max. temperature (°C) 80 Adjustable cleaning time (min) 1 / 30 Payload (kg) 130 Sound pressure level (dB(A)) 65 Tank capacity (l) 100 Number of current phases (Ph) 3 Frequency (Hz) 50 Voltage (V) 400 Dimensions (D x W x H) (mm) 1080 x 1000 x 1250 Very few operating hours as can be seen in the photo. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Fedpfx Aswah R Rog Reft Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Ffsdpfx Agsixt I Hs Rjt Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket Ffsdpfx Asq Ewgkjg Rst - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: new, Year of construction: 2023, cutting diameter 1100 mm saw band length 11000 x 67 mm cutting width 1,6 mm capacity 90 degrees: square 1100 x 1100 mm capacity 90 degrees: flat 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 8700 kg dimensions of the machine ca. 2800 x 1700 x 5200 mm The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table Ffodjtq Dw Eopfx Ag Rst - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Type: Cobra DS 600 E Ffedpfx Agod Rafbs Rjt Status: very good condition Delivery time: from stock

Condition: used, Year of construction: 2009, Technical details: basket dimensions: 1160 x 600 x 500 mm Fjdpsu Nu Iysfx Ag Rjft heating capacity: 4 kW rated capacity: 16 kW rated current: 400V / 50/60 Hz A heating capacity: 4 kW temperature range: 0 - 60 °C weight of the machine ca.: 0,308 to dimensions L x W x H: 1,5 x 1,0 x 0,95 m Industrial Washing Plant The ultrasonic washing system (bath) is composed of external generator for two inserts. Type MW 2000 GT with 25 kHz sound power 2x2000 Watt with 9 levels adjustable continuous/pulse operation ultrasonic time adjustable The housing, the insert basket and the cover are made of stainless steel. The washing unit stands on a lower tub. Inner dimensions: L:1160 x W:600 x D:500mm (to drain 410mm) Protection class IP23 *

Condition: excellent (used), Year of construction: 1983, Force: 45 tons Daylight: 205/305mm Table: 700x450mm Ram: 700x360mm Ram adjustment: 50mm Stroke: 10 - 50mm Fedpfx Asgfvnnjg Roft Strokes per minute: 80-400 Requested power: 11 kW Weight: 7.200 kos. Height: 3.100mm

Condition: new, Technical Data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine suitable for sheet metal shops and repair workshops - Sturdy construction with modern design - Easy adjustment of the upper beam via foot pedal, keeping hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending operations - Excellent price-performance ratio - Fast and simple bending process using the handle Fodsct Rzbepfx Ag Roft - Non-slip rubber coating on the foot pedal for safe operation - Easy lower beam adjustment according to sheet thickness - High upper beam for manufacturing deep-flanged profiles

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling Fjdpsw Rdvvsfx Ag Roft • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request!