Diesel Forklift

Kalmar DCE160-12

Condition: good (used), machine/vehicle number: 3631, Year of construction: 2009, load capacity: 16,000 kg, lifting height: 5,500 mm, mast type: duplex, total length: 5,400 mm, total width: 2,950 mm, operation weight: 27,680 kg, additional equipment features: Centralized greasing system, NATO-socket, Equipment: lighting, Kalmar DCE160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic - Dual mounting Laodpfxezc R Dks Alyoh Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A Ledpfjv Uxrvex Alysah

Condition: used, operating hours: 2,345 h, lifting height: 4,800 mm, free lift: 4,800 mm, fuel type: diesel, motor manufacturer: Volvo, Year of manufacture: 2003 Lifting capacity: 18.000 kg Please contact Kristoff Van Havere for more information - Fork Positioner - Forks 2000mm - Sideshift - 500 hours service done Lodpez Nvi Nefx Alyoah - Perfect condition

Condition: used, operating hours: 26,552 h, lifting height: 4,970 mm, fuel type: diesel, mast type: duplex, fork length: 2,100 mm, Year of manufacture: 2007 Year of construction: 2007 Empty weight: 24.680 kg Lifting capacity: 16.000 kg Maximum passing height: 416 cm Number of valves: 3 Mast type: duplex Laedpjz I A Tdjfx Alysh = Additional options and accessories = - 3rd valve - Battery charger - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Roof window = More information = Make of engine: Volvo Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Laodpfxer A Hcbo Alysh Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, operating hours: 17,396 h, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, fork length: 2,100 mm, General information Year of manufacture: 2007 Year of construction: 2007 Weights Empty weight: 24.880 kg Functional Lifting capacity: 16.000 kg Maximum passing height: 440 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Ledpfx Alsz I A Saeyoah Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Roof window = More information = Make of engine: Volvo Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 27,600 h, load capacity: 16,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,400 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - Diesel Load center: 1200 Mast type: Duplex Condition: Ready for use and fully functional Lsdpfjz Hg E Ijx Alyeah Technical condition: Good Front tires type: Pneumatic Rear tires type: Pneumatic Description: Sideshift, fork positioner, height-adjustable forks 3rd valve, 4th valve, rear work light, front work light, heater, full cabin,

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available in Q1/2027. Used for re-sharpening involute milling cutters / beveloid gear milling cutters / cutting rotors / form cutters / industrial knives / circular knives / spur gears / skiving tools / deep-hole drills, and other workpieces / components. Control system: Siemens 840 D Lsdpfxox Tr H Ns Alyoah X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing table): 360° SK50 C-axis (rotary table): 270° X3-axis: electrically driven, with tailstock Grinding spindle: HSK80 (conversion to HSK50 possible) Dressing unit Tool changer: 10-position magazine Coolant system: Turbo Separator Extraction system: LTA CO2 extinguishing system Additional accessories available from the factory Software can be supplied customized according to customer requirements Pre-acceptance at the factory, commissioning, training, and final acceptance at the customer's site Financing / lease purchase possible Modifications possible

Condition: good (used), machine/vehicle number: 3628, Year of construction: 2008, load capacity: 16,000 kg, lifting height: 5,500 mm, mast type: duplex, total length: 5,400 mm, total width: 2,950 mm, operation weight: 27,680 kg, additional equipment features: Front mud guards, Centralized greasing system, NATO-socket, Equipment: lighting, Kalmar DCE160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic - Dual mounting Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Laedpfjzfqq Ijx Alyjh Wheel size – Steering wheel: 12.00-20

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 4,133 h, load capacity: 16,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,200 mm, drive type: Diesel, Diesel forklift Mast type: Standard Lodpfxjzuqdye Alyjah Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab,

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore Lasdpjztctqefx Alyeh MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, machine/vehicle number: T331051593, Year of construction: 2006, operating hours: 5,323 h, load capacity: 16,000 kg, lifting height: 3,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,920 mm, power: 147 kW (199.86 HP), fork carriage width: 2,950 mm, fork length: 2,400 mm, empty load weight: 24,300 kg, drive type: Diesel, construction width: 2,950 mm, Heavy-duty forklift - diesel Chassis number: T331051593 Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Laodpfoyy Effox Alyeh ISO class: Terminal West Mast type: Standard Transmission: Dana Clark 342TE13310-20 Condition: Operational and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 12.00-20 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 12.00-20 Rear tires condition: 20 - 40% Description: Overhauled transmission with warranty (repaired for €17,000.00) 2,950 mm wide fork carriage Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, fully enclosed cab,

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 9,587 h, load capacity: 16,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 3,945 mm, power: 147 kW (199.86 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Rear tire type: Pneumatic Description: Side shifter, fork positioner, Lsdjzwrgnepfx Alysah 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, LED.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Lasdpew Dcdyefx Alyjh Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 17,582 h, load capacity: 16,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 3,945 mm, power: 147 kW (199.86 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load centre: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Duplex Laodpozwrgbsfx Alyoh Condition: Ready for use and fully functional Technical condition: good Front tyre type: Pneumatic Rear tyre type: Pneumatic Description: Sideshifter, fork positioner, Terminal-West quick-change system 3rd valve, 4th valve, rear work light, front work light, heater, full cab, air conditioning, LED,