Diesel Forklift

Kalmar DCG 160-12

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 155 h, load capacity: 16,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,695 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,680 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,450 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG160-12. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also be happy to offer your vehicle for consignment sale. Side shifter, fork positioner, Fpedez Ewdxspfx Ap Den Heater, full cabin, air conditioning.

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min Fpodpfewwarujx Ap Djn diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 375 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 3,300 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 25,200 kg, total length: 5,400 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Fpsdjz Ewczjpfx Ap Don Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable conditions are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DCG160-12. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and special construction for forklifts from 8 tons upwards. We will also gladly offer your vehicle for consignment sale at our location. Side shifter, fork positioner Fork positioner opening range: 700 / 2360 mm Heater, full cabin, full free lift

Condition: used, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 5,260 mm, fork length: 2,400 mm, total length: 7,410 mm, · Spurweite (c-c), vorn – hinten (mm) 1855 – 1960 · Wenderadius, außen – innen (mm) 5175 – 600 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 8770 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5 – 10 · Seitenverschub ± bei Breite über Gabelblatt (mm) 415 – 1530 · Achslast vorn, ohne Last (kg) 10500 · Achslast vorn, mit Nennlast (kg) 35800 · Achslast hinten, ohne Last (kg) 11900 · Achslast hinten, mit Nennlast (kg) 2600 Fpedpfxjz Db Ufs Ap Den · Luftdruck (Mpa) Hydraulikservo – Lenkrad · Typ – gebremste Räder Ölgekühlte Lamellenbremsen (Wet disc brakes) – Antriebsräder · Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 18 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen* (l) 15 · Motor Leistung ISO 3046 – bei Drehzahl (kW – rpm): 164/233 – 2200 · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm): 945 – 1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6 – 6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Kupplung, Typ: Drehmomentwandler · Getriebe, Typ: Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts: 3 - 3 · Lichtmaschine Typ – Leistung (W) AC-1960 · Anlasserbatterie: Spannung – Kapazität (V – Ah) 2×12 – 150 · Ergonomisches Lenkrad: Es ist verstellbar und kann auch zu einer Seite geklappt werden. Dies verringert die Belastung des Fahrers beim Fahren und Zurücksetzen. · Komfortable Pedale: Ein neues, flexibles und sicheres Pedalsystem mit verstellbarem Pedalwinkel. Verbessert die Ergonomie und minimiert die Belastung der Füße des Fahrers. · Hochleistungs-Scheibenwischer: Sorgen für eine 90%-ige Deckung der gekrümmten Frontscheibe. Dachscheibenwischer sind auch integriert. · Ergonomischer Mehrfunktionssitz: Drehbar und voll integriert. · Klimapaket: Vollkommenes und flexibles Klimatisierungssystem, das den hohen Ansprüchen der klimageprüften EGO-Kabine genügt. Größere Lufteinlässe. Problemloser Filtertausch an der Maschinenfront. Vollkommener Fahrkomfort dank hervorragend dimensionierter und konstruierter Baugruppen. · Bedienkonsole: Problemloses Einstellen, Anpassen, Nutzen und Begreifen. Alle erforderlichen Bedienelemente, Schalter, Hebel und Anzeigen sind für effizientes Arbeiten leicht zugänglich. · Bedienungspult: Die vollendete Einheit für Fahrer, die das Minilenkrad oder den Lenkhebel nutzen. Integrierte Schaltknöpfe. Für optimale Ergonomie uneingeschränkt verstellbar und individuell getestet. Das ergonomische Lenkrad wird ohne Sichtbehinderung nach vorn geklappt. · Optimierte Sicht: Vollständig neues offenes Design. Mit cleveren Profilen und gekrümmten Front- und Heckscheiben. Optimierte Sicht aus allen Winkeln – mit außergewöhnlich guter Sicht diagonal nach vorn und nach hinten. Starkes Freiluftgefühl · Cummins‘ neue Dieselmotoren für EU Stage IIIB / EPA Tier 4i: Die neue Cummins-Dieselplattform kombiniert eine gekühlte Abgasrückführung mit einer verbesserten Hochdruck Common-Rail-Kraftsto0anlage (HPDR) und einem Partikelfilter. Dies ermöglicht eine sauberere und effzientere Verbrennung, die einen um bis zu fünf Prozent geringeren Kraftstoßverbrauch ohne Einschränkung der Leistung bewirkt.

Condition: used, Year of construction: 2018, functionality: fully functional, Hwacheon T2-2T YSMC dual turret and dual spindle CNC lathe, year 2018, equipped with SIEMENS SINUMERIK 840-D control, high-performance machine for complex and simultaneous operations, ideal for high-precision series production. Main technical specifications: Max. swing diameter over bed: Ø 880 mm Max. turning diameter: Ø 460 mm (main spindle) / Ø 390 mm (sub-spindle) Turning length: 444 mm (upper carriage) / 437 mm (lower carriage) Bar capacity: Ø 65 mm (main and sub-spindle) Axis travels: X1: 245 mm / X2: 210 mm Z1/Z2: 520 mm Y: ±50 mm (total 100 mm) B: 550 mm Rotary axes C and A: Resolution 0.001° (360°) Spindles: Speed: 50 ÷ 5,000 rpm Power: 11/15 kW Spindle nose: ASA A2-6 Sub-spindle chuck: Ø 210 mm Tool holders: Upper/lower turret: 12 stations each, driven Driven tools: 6,000 rpm, power 5.5 / 7.5 kW Tool size: 25x25 mm (turning), Ø 40 mm (boring) Rapid traverse: X1/X2/Z1/Z2/B: 30,000 mm/min Y: 15,000 mm/min Included accessories: TOP AUTOMAZIONI MAGIC bar feeder TOP AUTOMAZIONI RETURN D.65 automatic parts unloader Chip conveyor Coolant tank with pumps and two high-pressure pumps Various fixed and driven tool holders Tool presetting arm with dual head Manuals, electrical diagrams, CE declaration Complete and high-performance machine, perfect for high-productivity multitasking turning. Fpsdpfx Apswt S N Dj Dsn

Condition: good (used), machine/vehicle number: 3506, Year of construction: 2016, load capacity: 16,000 kg, lifting height: 10,000 mm, mast type: duplex, total length: 5,500 mm, total width: 2,890 mm, operation weight: 29,100 kg, additional equipment features: Dual tread, Front mud guards, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Fsdpjyuilkefx Ap Dopn Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: good (used), machine/vehicle number: 2708, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Engine heater, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Fjdpfoyuhr Njx Ap Djpn

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Fpedpeyk Uimsfx Ap Dsn Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: good (used), machine/vehicle number: 2707, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Engine heater, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Fpodeyuhr Aepfx Ap Don Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: good (used), machine/vehicle number: 3440, Year of construction: 2013, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,500 mm, total width: 2,500 mm, operation weight: 23,880 kg, additional equipment features: Centralized greasing system, NATO-socket, Dual tread, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Fpsdsyuihljpfx Ap Den Wheel type – Drive wheel: Pneumatic - Dual mounting Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: used, Year of construction: 2009, turning diameter max. 750 mm turning length 3.500 mm turning length Standard: 3.071 mm control Sinumerik 840 D Siemens Working height 1.300 mm x-travel 435 mm z-travel 3.071 mm max. workpiece weight between centers 2.000 kg turning speed range - main spindle 10 - 3.000 min/-1 power capacity - main spindel 61,2 / 195 kW max. Torque 779 Nm spindle head A 11 DIN 55026 Spindle speed range subspindle 10 - 3.000 min/-1 power capacity - Sub spindle 73 / 233 kW max. Torque 932 Nm spindle head A 11 DIN 55026 spindle diameter in front bearing 180 mm U-axis min. -5 - max. 430 mm w-axis min. 276 - max. 3.347 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm x-axis Y0: min. -25 - max. 410 mm x-axis Y+55: min 70 - max. 505 mm x-axis Y-55: min -120 - max. 315 mm y-axis -55 - +55 mm z-axis min. 676 - 3.747 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm feed speeds X: 0,1 - 18.000 mm/min feed speeds Z: 0,1 - 30.000 mm/min rapid power traverse in X-and Z direction 18 / 30 m/min Feed force 15 kN total power requirement 85 kVA weight of the machine ca. 26,5 t dimensions of the machine ca. 9,0 x 4,0 x 3,3 m CNC Lathe NILES SIMMONS - N 30/3LT - 3500 Fpjdpfx Aszluhwep Den - Extensive accessory package - NOT INCLUDED: Tools on the turrets! - Full-stroke clamping cylinders on BOTH spindles

Condition: used, Year of construction: 2025, lifting height: 4,500 mm, fuel type: diesel, motor manufacturer: Cummins-Diesel, Lifting capacity: 16.000 kg Please contact Sales Team for more information Fjdpfsznw E Dex Ap Dopn

Condition: good (used), machine/vehicle number: 3441, Year of construction: 2013, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, total length: 5,700 mm, operation weight: 24,000 kg, additional equipment features: Manual sliding cabin, Dual tread, Centralized greasing system, NATO-socket, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Fsdpfxjyuihro Ap Depn

Condition: used, Year of construction: 2014, functionality: fully functional, Brand: HYUNDAI-WIA Model: LM-1800 / ITSY Category: CNC Turning Center Year of manufacture: 2014 CNC Control: FANUC Series 31i – Model A Machine weight: 8,500 kg Machine Dimensions Length: 4,600 mm Width: 2,100 mm Height: 2,090 mm Working Capacity Max swing diameter over upper/lower carriage: No.1: Ø 290 mm / No.2: Ø 290 mm Max turning diameter (spindle / sub-spindle): No.1: Ø 230 mm / No.2: Ø 230 mm Max turning length: 673 mm Bar capacity (spindle / sub-spindle): Ø 76 mm Fpsdpjyargujfx Ap Don Axis Travels X1 / X2 axis: No.1: 165 mm / No.2: 195 mm Y axis (upper turret): 100 mm (± 50 mm) Z1 / Z2 axis: No.1: 700 mm / No.2: 720 mm ZB axis: 668 mm C axis (spindle and sub-spindle): 360° Min. programmable angle: 0.001° Main Spindle and Sub-Spindle Spindle speed: 50 – 5,000 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 210 mm Spindle motor power (max/cont.): 22 / 11 kW Turrets Configuration: Turret 1 + Turret 2 BMT-55 Stations per turret: 12 (live tool capable) Total stations: 24 Live tool speed: 5,000 rpm Live tool power: 5.5 kW Tool dimensions: Turning: 20 x 20 mm / Boring: Ø 32 mm Rapid Traverses X1 / X2 axes: 20,000 mm/min Y axis: 7,500 mm/min Z1 / Z2 / ZB axes: 40,000 mm/min Accessories TOP AUTOMAZIONI bar feeder – Fusion model Coolant collection tank with wash pumps Chip conveyor Fixed and driven toolholders Automatic tool presetting arm with M code Manuals, electrical diagrams, and CE Declaration Overhauls Carried Out Complete overhaul of turrets 1 and 2 with replacement of seals and bearings Overhaul of X2 and Z2 axis ballscrews with bearing replacement Complete overhaul of the axis lubrication circuit and replacement of pneumatic hoses Overhaul of piece ejector pistons (Z2 unload hand) with gantry replacement Complete interior repainting Replacement of operator side glass Complete overhaul of telescopic covers on all linear axes

Condition: good (used), machine/vehicle number: 3439, Year of construction: 2012, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, total length: 5,700 mm, operation weight: 24,020 kg, additional equipment features: NATO-socket, Dual tread, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Fpsdpfx Asyuihfep Don Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20