Industrial robot

KUKA KR210-2 2000 & NEW MEGMEET WELDING SET

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg Bjdpfx Afsikqz Sshjcu

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Bsdpfx Aeh Dwr Usfhscu Without cable and control cabinet. Addendum to the measurement report!

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. Bcsdpfx Aetrd T Tofhou 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), functionality: fully functional, Year of construction: 1989, number of rollers: 3, Over roll 280mm, 12mm Prebending, capacity 18mm 3x top roll diam. Bedjwtp Haepfx Afhecu Weight 7,100kg

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Bcsdpfxelhwr Ro Afhsu Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Bodpfot Hw Uvox Afhecu Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2006, condition: good (used), functionality: fully functional, Screw press Farmet FS1000 for rapeseed, soybean, sunflower. Capacity from 800kg to 1.000kg, depending on motor. It is complete, in good condition. Manufactured in 2006 Bcjdetxc Itepfx Afhsu

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Bcsdpfxjtzctme Afhju Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Bcjdpfx Afjh Dwrxjheu Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet Addendum to the measurement report!

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Bcodpfx Afsi D Da Aehsu Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.