Centrifugal Machine
LANNER ME41-2

Name: LANNER ME41-2
Brand: LANNER
Availability: InStock

Condition

Used

Location

Germany

Machine data

Machine type:: Centrifugal Machine

Manufacturer:: LANNER

Model:: ME41-2

Condition:: used

Price & Location

Location:: , Germany

Call

Details about the offer

Listing ID:: A4716780

Reference number:: 1380-61733

Update:: 22.01.2025

Description

Technical details:

drum diameter: 400 mm
revolutions per minute: 980 U/min
Hsdpfsft Tipsx Acbofg
total power requirement: 2,2 kW

Lanner batch wringer ME41-2
for deoiling of metal chips
-turnkey delivery and easiest handling
-very long service life, operation free of vibrations
-compact and easy to maintain, i.e. low maintenance costs and quick return of investment
-standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control
-including control cabinet laterally placed, i.e. not in swivel range of crane
-drum volume 35 Liter/max. 50 kg
-rotation speed max. 980 min-1
-power 2,2 kW
Painting:
RAL 5012 light blue (batch wringer, crane support)
RAL 1003 signal yellow (traverse)
RAL 7035 light grey (control cabinet)
In each case silk gloss. Changes after consultation.
Also included in the scope of delivery:
-Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge.
-Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use
-Lifting beam: for lifting the insert drum.
-Documentation on CD-ROM and in paper form
Optional for extra charge:
-Additional insert drum with pivot, perforation: ø 3 mm
-Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray
Please, contact us for getting more information and pictures on mail(at) or

*

Seller

Registered since: 2011

50 listings online

Call

Send inquiry

Telephone & Fax

+49 2205 ... show

Fax:

These listings may also fit your interest.

Listing

Vacuum pump Gardner Denver/Rietschle V-VC 303

Bocholt

7,028 km

Vacuum pump
Gardner Denver/RietschleV-VC 303

Call

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Hedpjq S N Iiefx Acbofg Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

See details

Listing

Europe

6,478 km

Precision turning lathe
INDEXC200

Call

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Hfjdpfxsxxm Hfj Acbsg Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

See details

Listing

CNC cylindrical grinding machine - Universal M. + M. Mai GmbH MBF 453U

Großbettlingen

6,832 km

CNC cylindrical grinding machine - Universal
M. + M. Mai GmbHMBF 453U

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Hfsdpfx Aetrf Smjcbjg Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

See details

Listing

Cleaning system - Top loader Glogar TR450

Linz-Land

6,455 km

Cleaning system - Top loader
GlogarTR450

€17,350

Fixed price plus VAT

Call

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type TR450 The spray rotary cleaning system type TR450 is an automatic cleaning and degreasing system with a cover that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets measuring LxWxH 520x320x200h mm. The basket must be closed with a lid for the cleaning process. The cleaning result depends on the fact that the parts can be easily circulated in the basket in the case of bulk goods. The fill level in the basket must be observed for this. The system is also equipped with a flood tray under the basket, which enables the parts to be scooped up in a flood, thus achieving an even better cleaning result. including the following equipment: - Completely made of stainless steel 1.4301 inside and out Hfodpfjfbt Siex Acbog - Level monitoring and automatic fresh water refill - Insulation of the entire system - Hot air drying (output: 11.6 kW) - Steam vapor extraction - Oil skimmer for bath maintenance - Automatic fresh water refill - 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable lid Connected load: approx. 20 kW (32 amp plug)

See details

Listing

Thermo oil temperature control unit Regoplas RT50

Dn10 4Es

7,524 km

Thermo oil temperature control unit
RegoplasRT50

Call

Listing

Lipsko

5,864 km

E2 crate washer
Metalbud NowickiMP-300

Call

Condition: used, The NOWICKI MP-300 professional container washer is a device designed for intensive use in food, meat, fish, and dairy processing plants. Thanks to its robust construction and high capacity of up to 300 containers per hour, the machine is ideal for use wherever hygiene and efficiency are key. Technical specifications: Model: MP-300 Manufacturer: Metalbud NOWICKI Power supply: electric Hfsdpew Rdktofx Acbog Capacity: up to 300 containers/hour Dimensions: 370 cm (length) × 150 cm (width) × 190 cm (height) The device has been designed for easy cleaning and quick servicing. It guarantees a long service life and reliable operation even under intensive use. Advantages of the NOWICKI MP-300 washer: High efficiency Energy-efficient operation thanks to modern components Easy access to internal components for easy cleaning Compact design, adapted to production lines

See details

Listing

Contamine-sur-Arve

7,060 km

Swiss-type cnc lathe
BOLEYBC20-VI

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] Hsdpfxouha Ums Acbofg SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

See details

Listing

Bogie Hearth Furnace Nabertherm W 1000/A

Germany

6,760 km

Bogie Hearth Furnace
NaberthermW 1000/A

Call

Listing

Germany

6,760 km

CNC Lathe
TraubTNC 42/65 DGY

Call

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Hfjdpfx Acjv Scrhobog

See details

Listing

Contamine-sur-Arve

7,060 km

Cnc multispindle lathe
INDEXMS22-6

Call

Condition: used, TECHNICAL DETAILS Hsdpfxew Ah R Ns Acbjfg - Number of spindles : 6 - Max. bar diameter : 22 [mm] - Spindle speed : 10,000 [rpm] - Spindle power : 8.7/15 [kW] - Torque : 10/18 [Nm] - Number of counter-spindles : 2 - Spindle speed : 10,000 [rpm] - Number of slides : 10 - Travels : X x Z = 62 x 85 [mm] - Number of counter-operation slides : 2 - Travel : X = 62 [mm] - Dimensions : 3330 x 1830 x 2860 [mm] - Weight : 5700 [kg] - Connected power : 75 [kVA] - Production hours : 20,000 [h] EQUIPMENT - CN Siemens 840D SL - 2 NCU - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA counter-spindles - 2 parts catchers with conveyor belt - Bar scrap recuperator - Index bar guide - Bar feeder predisposition - Fire protection system

See details

Advertise here

Centrifugal MachineLANNER ME41-2

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Centrifugal Machine
LANNER ME41-2