Electro Fork Lift

Linde E12-01

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,467 h, load capacity: 1,200 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery year: 2014 Sideshift, 3rd valve, Ijdoxthiwjpfx Agtstp

Condition: refurbished (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with camera, laser and Renishaw probe system. Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2025. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Iedpsdy Uvmsfx Agtotp Measuring range of all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: about 800kg max. loading weight: glass plate 30kg Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s including camera including lasers including LED ring light incl. new frame grabber (Eagle) including 2-monitor operation incl. CNC control and PC including new Optichek 3D 5.0 evaluation software

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,200 h, load capacity: 1,200 kg, lifting height: 2,800 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,021 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Itedpfx Ajw Ntnfsgtep Sideshift, 3rd valve, roof cover, front windscreen,

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 3000 mm Ijdpfx Agew S N Igjtstp Measurements depth 2300 mm Measurements height 2700 mm Machine weight 9600 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper SK40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Media Chip conveyor Yes Additional Equipment Chip conveyor, coolant system, tool chain magazine, internal coolant supply, extended chip flushing, rotating viewing window, mist separator, blast air, optical measuring probe, tool breakage control, flushing gun, 3D control, NC swivel rotary table, preparation for handling system, signal light, electronic handwheel, screen display. Optional accessories for sale: 48x aluminum clamping plates (own construction); 48x vices HSG5 from Ceratizit (WNT), 5x shelves (own construction), tools and holders This 5-axis DMG MORI DMU 60 EVO was manufactured in 2016. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm and 120-fold tool change. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40 bar. Ideal for complex machining tasks, the DMU 60 EVO represents a robust addition to any workshop. For more information about this vertical machining centre, please reach out to us. Application Types Milling

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Iodsb Auu Rjpfx Agtotp Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Itsdpfxoiyx Uzo Agtsp Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: new, Year of construction: 2025, total length: 1,600 mm, total width: 2,200 mm, total height: 2,350 mm, overall weight: 250 kg, type of input current: three-phase, working width: 1,400 mm, Paint booth, paint wall, suction TQN1414 With right or left side discharge. Working dimensions (mm): 1400 (width) x 1400 (height) x 800 (depth) Overall dimensions (mm): 1600 (width) x 2350 (height) x 1250 depth SPECIFICATION: • Fan power 1.5 kW, • Efficiency 6,500 m³/h, • 2 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Cabin available immediately (Stock status) SELECT BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Iodpfxed S N I Nj Agtstp Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products have an EC certificate. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Working width 3500 mm Itodpfx Aed Rzc Rjgtsp Working height 2300 mm Number of cylinders 4 St.

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Itjdeiqt S Aepfx Agtsp Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. errors and omissions excepted-data given without obligation

Condition: good (used), travel distance X-axis: 2,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 810 mm, Manufacturer: Hedelius Type: Tiltenta T6-2300 Control: HeidenHain iTNC530 Year of manufacture: 2005 Optional NC-Rotary Table Working area 750 x 550 mm Table load 800 Kg Torque on table 1600 Nm Rotation speed 22 Rpm 2 x 850 mm pendulum job HeidenHain HR 410 handwheel HeidenHain iTNC530 Specifications Metric US Standard X - Axis 2300 mm Y - Axis 630 mm Z - Axis 810 mm A - Axis -92 to +92 ° Itodpfx Aewrq Upegtop B - Axis 360.000 ° Table length 2900 mm Table width 630 mm Table load 2000 Feed X - Axis 60000 mm/min. Feed Y - Axis 60000 mm/min. Feed Z - Axis 60000 mm/min. Tool holder 40 ISO/Bt/Mk Spindle power 26.5 kW Speed 12000 Rpm Tool changer 40 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (Estimate) Length 7500 mm Width 3250 mm Height 3250 mm Weight 16800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.