Oak threshold sleeper threshold

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 1,000 mm W-axis travel: 250 mm Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg Bledpjya U U Ujfx Afhjc MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Paper band filter Electronic handwheel Original documentation

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Bedpet U Ivtjfx Afhslc

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: PHILIPS CNC 532, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Table clamping surface: 630 x 500 mm Spindle taper: SK 40 Spindle speeds: 20 - 6,300 rpm Feed rate: 30 m/min MACHINE DETAILS Bljdpfx Afsya Hcqohec Control: PHILIPS CNC 532 Internal coolant supply: 40 bar Total power requirement: 50 kW Dimensions & weight Machine dimensions: 4.98 x 2.78 x 2.93 m Machine weight: approx. 13.3 t EQUIPMENT Chip conveyor Coolant system Rotary pallet changer Hydraulic swivel head (horizontal/vertical)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AB0702, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, controller model: FANUC 21 iMB, table load: 500 kg, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 530 mm Table clamping surface: 800 x 500 mm Spindle speeds: 60 - 8,000 rpm Spindle taper: SK 40 Spindle taper standard: DIN 69871 A Maximum table load: 500 kg Blsdpfjya E Thsx Afhsc Rapid traverse X/Y/Z-axis: 30 m/min Tool changer: 30 positions Tool diameter with full magazine: 80 mm Tool diameter with 2 free positions: 120 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg MACHINE DETAILS Control: FANUC 21 iMB Total power requirement: 30 kVA Dimensions & Weight Machine dimensions (L x W x H): 2.4 x 2.2 x 2.46 m Machine weight: 4.5 t EQUIPMENT NC rotary axis with tailstock, manufacturer MECA-DIVIMEK (Spain), DCH 160 C 2 machine vices Coolant system

Condition: used, Year of construction: 2023, Samasz Fisher pruning saw PT3-190 Bledouk Sghjpfx Afhoc Year of construction 2023, demo machine used 1.90 m working width 3 saw blades Hydraulically driven, pressureless return required Mounting suitable for Claas Scorpion or JCB Q-fit available incl. parking supports | Internal no.: 11198883

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,500 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm Pallet size: 1,740 x 650 mm Spindle taper: SK 50 Spindle speeds: 25 - 6,000 rpm Spindle overhang: 665 mm Bedpfxjya E Rys Afhelc Distance spindle nose to table: 200 / 850 mm Spindle motor power: 18.5 kW Max. spindle torque: 758 Nm Feed rate - longitudinal/cross/vertical max.: 8 mm/min Rapid traverse longitudinal and cross: 26 m/min Rapid traverse vertical: 20 m/min Drilling capacity (solid): 50 mm Tapping capacity: M 45 Tool changer positions: 60 Tool diameter: 125 mm Tool diameter with 2 empty stations: 260 mm Max. tool length: 400 mm Max. tool weight: 20 kg EQUIPMENT Chip conveyor Coolant device

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91132846, Year of construction: 2018, operating hours: 8,616 h, The mast will be disassembled by the manufacturer prior to transport. The technical data is based on the original quotation. The seller assumes no liability for its accuracy. TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Mast type: DZ-V mast Lift height: 10,700 mm Height of mast (retracted): 4,100 mm Free lift: 3,456 mm Height of mast (extended): 11,344 mm Bodsyaawhepfx Afholc Fork tilt forward: 2° Fork tilt backward: 5° Fork length: 1,150 mm Fork dimensions: 40 x 120 x 1,150 mm Width between wheel arms/loading platform: 940 mm MACHINE DETAILS Height to top of overhead guard (cab): 2,263 mm Overall width: 1,282 mm Battery voltage: 51.2 V Tyres: Ø 343 x 114 Operating hours: 8,616 h EQUIPMENT ISM Online ETV 216i Drive & liftPLUS equipment package Drive wheel, 140 mm wide Load wheel cover Panorama overhead guard Panorama rear-view mirror Blue floorSPOT lighting M-Device; including 2 adapters Video; video preparation Seat; leather MSG20 with 3-stage heating Voltage converter; 125 W, 48/24 V Battery: Li-Ion 51.2 V 360 Ah Type IM Charger: SLH300 D400 48 V 150 A

Condition: used, power: 294 kW (399.73 HP), overall weight: 78,000 kg, Year of construction: 1997, operating hours: 11,280 h, machine/vehicle number: 72653, Backhoe excavator with digging bucket, extensive documentation available Bsdet S H A Hopfx Afhslc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 1,298 kg, load capacity: 120 kg, arm reach: 3,900 mm, controller manufacturer: KUKA, number of axes: 6, TECHNICAL DETAILS Axes: 6 Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % MACHINE DETAILS Robot control: KUKA Control protection class: IP54 Blsdpfx Aoycqb Aofhsc Robot protection class: IP64 Robot pedestal height: 1,500 mm Weight: 1,298 kg

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Bljdpfxoycp Tkj Afhoc MACHINE DETAILS (not available) EQUIPMENT (not available)

Condition: used, mileage: 2,26,206 km, power: 235 kW (319.51 HP), first registration: 10/1981, fuel type: diesel, number of seats: 27, gearing type: automatic, color: white, brakes: retarder, Equipment: air conditioning, bathroom, onboard kitchen, parking heater, This SG 221 HDS was originally intended for shuttle service to Southern Europe, but remained a one-off; nevertheless, it served as the foundation for two further high-deckers of a special kind: the S 215 HDS and S 216 HDS, which would soon bring Kässbohrer many new customers. Additionally, this coach introduced the 'S' designation: it stands for Super, because these new high-deckers truly lived up to their name. With a height of 3.63 meters, the elevated passenger compartment created even more space, accommodating not only more luggage (16 cubic meters) but also additional service facilities. Extra fuel tanks could also be installed without issue. Regardless of which of the two Super-Setras the bus operator chose, the engineering marvel of these two new Ulm models was that, except for the front section, they were 100% modular components from the Series 200 and shared identical bolted assemblies with other Setra touring coaches. The 216 HDS offered space for up to 16 rows of seats. In comparison, the underfloor cockpit variant provided more interior space. With the Setra SG 221 HDS, Kässbohrer had a vision, but due to the ban on running articulated touring coaches through France, they shifted focus in favor of solo vehicles. The SG 221 HDS was subsequently used as a demonstration and information bus at trade fairs and conferences; with its generously equipped kitchen on board, it became a central meeting point for representatives and customers. +++ Unique Vehicle +++ +++ATTENTION!!!!!+++ +++pure restoration project+++ +++not roadworthy / only the engine runs+++ Engine: Mercedes-Benz Mileage according to odometer Transmission: 5-speed automatic Seating: 24+2+1 sleeping seats ---- Safety Retarder * Fog lights Passenger compartment Bodpfx Afermlp Eehslc Stand heating * Air conditioning * Tables * Curtains * Jet ventilation * Reading lamps * Double glazing * Footrests * Tap system with bar and large kitchen in rear area * Separate bar area in the center * Lounge area at the front convertible to sleeping area * Refrigerator + additional * Microwave * Rear WC * Driver microphone Exterior Power steering * Tachograph with disc * Sleeping cabin * Driver door * Roof hatches/fans/roof ventilator Other German vehicle documents * Vehicle dimensions: length 18.00m, width 2.50m, height 3.95m * Twin tires * Tires: Front axle approx. 40% Our internal vehicle number: 7271 Subject to errors. Pictures and text may differ from the actual vehicle. Over 180 vehicles always in stock.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Bedpeyanr Tjfx Afhelc Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap Bedpfx Aeyanplofhelc • Automatic pallet changer • Work area lighting • Positioning laser diode • Oil spray device • Piercline • FocusLine • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 9,040 kg, The compact screening plant is equipped with a powerful 2-deck screen box. The hydraulically folding conveyor belts and the unique compact design make it possible to it, that the screen can be folded up and transported very easily. The aggressive screen box can process up to 180 tons / hour and can be used for a wide range of applications. of applications including recycling, demolition, crushed stone, sand and gravel, soil and compost. compost. The simple drive unit and hydraulics result in easy maintenance, operation and maintenance. Bodpfeum I Hpjx Afhelc Technical description: * Deutz engine * Dimensions feed hopper: 2200 x 1200 mm * Dimensions upper screening deck: 2865 x 1200 mm * Dimensions lower screen deck: 2430 x 1200 mm * Key start * Simple hydraulics * Conveyor belts for fine and medium-fine products * Discharge conveyor for oversized products * Webtec for controlling the belt speed * Screen mesh - 1 set of desired screen mesh / several combinations available * Weight: 9,040 kg * Transport dimensions: 8000 x 2200 x 2700 mm (lxwxh) * 1 year warranty from start of operation

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT Bljdjycp Nljpfx Afhoc FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.