Used Hermle C 600 V for sale (141)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Fixed table: 900 x 480 mm MACHINE DETAILS Control: HEIDENHAIN Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Rbjdpfx Adjxl Sunsbst Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Weight: 6,300 kg EQUIPMENT Tool changer

Year of construction: 1989, condition: used, control: Heidenhain TNC 355 table size: 900 x 465 mm travel: X-600 mm, Y-400 mm, Z-420 mm tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm Rbjdohd Rm Uspfx Adbet feed: 1-5000 mm/min

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm table-size 700 x 280 mm control Heidenhain TNC 145 tool adaptor SK40 turning speed range 40- 2.000 U/min Rjdpfxoxlufpo Adbebt rapid speed 1,5 m/min feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm weight 1,3 t total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Rsdpfx Adow D Evlebobt

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Rbsdpjlc N Stofx Adbet

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 Rbodocxxntspfx Adbst feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: good (used), Year of construction: 2004, Manufacturer: HERMLE Type: U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 Machine weight: approx. 8500 kg Tool holder: SK 40 X travel: 1300 mm Y travel: 720 mm Z travel: 630 mm Speed range: 18000 rpm Max. table load: 700 kg Rjdjv S Alnspfx Adbebt Operating hours: 50,775 Spindle hours: 21,654 Space required: approx. 3600 x 4500 x 2800 mm Table size: 800 x 1000 Number of tools in magazine: 28 positions Internal coolant supply: 80 bar 3D measuring probe: TS 640 5 axes simultaneous

Condition: good (used), Year of construction: 1983, Control: Positioning and linear control incl. screen HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working range X axis (longitudinal) from manual/automatic 410/390 mm Y-axis (transverse) from manual/automatic 310/290 mm Z-axis (vertical) from hand/automatic 400/380 mm quill stroke vertical 63 mm Rodeht Hbujpfx Adbjbt Angular table clamping surface 700 x 285 mm drive power (at 1500 rpm) 2,2 kW speed range 45 - 2000 rpm Number of speeds 12 Step change (geometrically stepped) 1.4 Tool holder (DIN 2079) ISO 40 EQUIPMENT/ACCESSORIES operation by hand and by CNC program vertical and horizontal machining vertical milling head tiltable vertical milling head angle adjustable spindle sleeve feed vertical, manual angular table Coolant device Coolant and chip tray Chip splash guard in working area Set-up elements Documentation

Condition: good (used), CNC - Universal Milling Machine HERMLE UWF 902-S -Heidenhain 426 - Control -Year of manufacture: 1997 -Traverse paths X/Y/Z: 600-450-500mm -Tool holder: SK 40 -Vertical - horizontal milling device -Quill feed -Coolant system -Angle table Rodpfx Adjxb Azwebjbt -Machine enclosure -Documentation Dimensions: LxWxH 3.9x2x2 meters / Weight 4000Kg Errors and omissions excepted.

Year of construction: 1969, condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model : FW 800 Machine No. : 304 Year of manufacture: 1969 Weight: approx. 1000 KG General / technical data: well preserved used horizontal milling machine with hydraulic program control (cam control bar) for automatic production process. admission: SK 30 travel: X 400mm Y 370mm Z 165mm Speed: 18 pieces mechanically switched in 2 motor steps 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm feeds: in X and y axis stepless hydraulic in z ( horizontal milling spindle) manual table dimensions (rigid table): 800mm x 220mm power supply / spindle motor power: 380Volt 50 HZ / 1,5 KW approx. space requirement of the machine: 1900mm x 1100mm x 1700mm (bxtxh) Accessories / special equipment: - Rigid fraestable - Item various tool holders - spittoon - cooling device Rsdpfxsdgrwdj Adbjbt - Machine documentation with program instructions Remarks The machine is in a very good condition according to its age. The machine is preferably designed for the production of small and medium series. The machine has a simple hydraulic program control controlled by a cam switch.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Rbodsvn Si Ijpfx Adbet Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: good (used), Hermle Centrifuge Z 200 A Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A takes up to 12 x 15 ml tubes with conical and round bottom. Specifications . Volume: max. 12 x 15 ml / 6 x 50 ml. Speed: max. speed/RCF: 6000 rpm / 4185 xg min. Speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: knob-controlled in 250 rpm steps Speed display: preset and actual speed - digital Running time: max. time: 30 min. / continuous run min. time: 0.5 min. Preselection: 0.5 - 30 min. / "Contin. Time setting: by push-button 0.5 min. increments Time display: remaining time - digital Brake: fixed braking force with soft stop Features: microprocessor-controlled - Microprocessor-controlled - DC motor, covered - ABS plastic housing shock and chemical resistant Safety: - Lid locking system - automatic unbalance indicator with safety cut-off - manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inch): Width: 28 / 11.0 Rjdpfxem Albds Adbjbt height: 26 / 10,2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm Rbodswmm D Nepfx Adbot NC rotary table 4th axis: Ø 800 mm Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER Rbsdpfxoup Hwxo Adbet - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 Redpfeup Hw Eex Adbobt - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: good (used), BHG Hermle CNC milling machine Type: UWF 1000 Control: Heidenhain TNC 355 X-path: 700 mm Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Year of manufacture: 1988 Including documentation and parameters Dimensions: 230x200x220 cm LxWxH Weight: approx. 4000 KG Rjdpfx Aeqwgzbsdbobt

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Rjdexx U Hyepfx Adbobt

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS Rodpfx Adjxnkfkjbsbt CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools.

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg Rbsdewbi A Dspfx Adbet - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: good (used), Year of construction: 1999, Hermle C 600 V, year of manufacture 1999, Heidenhain TNC 430 control, travel X/Y/Z 600/450/450 mm, machine from first owner, table size 800 x 465 mm, spindle speed up to 12,000 rpm, 30-tool changer, SK 40 taper, 3D measuring probe, 9,400 spindle hours. Rodpfx Adoxmg Eqjbsbt

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (min.): 16,000 rpm, The machine is in good technical condition, featuring a Heidenhain TNC 426 control system, a magazine for 20 HSK 63 tools, including a probe + 4th axis. Rjdpfx Aoxfg Ayjdbjbt

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Operating voltage: 400 v / 3-phase / 50 hz • Control voltage: 24 v Rsdpoyarzrsfx Adbjbt • Total current: 44 a • Magazine for 30 tools, sk40. Extra Information Machine still under power

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: Rbedpfx Asx Hhctsdbjt - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 8 000 min⁻¹ Rjdpfx Adsyfgtaebobt Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: HEIDENHAIN, controller model: TNC 430, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. • Electronic thermal expansion compensation • Ethernet interface • Tool positions: 30 • Mts single 24-position magazine plate • Heidenhain sk 40 infrared probe • Breakage monitoring • C-axis: rotary table with worm gear • Rotary table top Ø: 280 to 450 mm • Extended x-axis: 2010 mmApplication: Prototype construction. EROWA Robot easy automation is from 2011The automation system was manufactured in 2011 and has only been in use for a few hours! Hours of automation: No exact information is available as there is no hour meter in the automation system. Rsdsx D Iywopfx Adbobt Additional equipment • Oil mist extraction • Electronic handwheel • Chip flushing gun • Machine bed flushing • NC swivel table • Blow-off device • Closed roof • 200-liter coolant tank • Includes 24 pallets and MTS-Chuck S-P/A clamping additional clamping devices, tools, etc. spindle was replaced last ensive maintenance work was also carried out as part of the last WA Robot easy automation retrofitted in Single magazine plate with 24 slots.