Used Hermle Uwf 802 M for sale (159)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Isdpfx Asxbz A Hoabebc Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 Ibedpowbi A Dsfx Aabec - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 6500 kg Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Tools Number of index 30 Type of tool holder HSK63 Ibjdpfxow Uag So Aabjc This 5-axis HERMLE C 20 U was manufactured in 2006, featuring a vertical machining center with a 30-tool HSK63 and a maximum speed of 18000 rpm. It includes a measuring probe, although the X and Y guides will require servicing soon. Consider the opportunity to buy this HERMLE C 20 U vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm Ibodpfx Asflrg Tsabsc carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 12263, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, quill stroke: 75 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC table: 500 mm C-axis: 360° B-axis: ±30° Rotational speed: 11 rpm Resolution: 0.001° Component accuracy: ±15'' Table load capacity: 300 kg Ibsdpfx Asw Rc Absaboc Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed range: 20 – 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 – 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Feed screw diameter and pitch: 32 / 10 mm Measuring system Direct path measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm Tool system Spindle taper: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool stations: 16 Tool diameter: 80 mm Tool diameter with free adjacent stations: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Control unit: Heidenhain TNC 410 Electrical data Operating voltage: 400 V / 50 Hz Total connected load: 14 kVA Dimensions & Weight Dimensions (L x W x H): 3.0 x 2.3 x 2.2 m Weight: 4,800 kg

Condition: used, Hermle H 2 milling machine with accessories Ibsdpsugv Nwefx Aabec

Condition: good (used), Year of construction: 2006, operating hours: 1,19,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 Ibjdpexcp Srefx Aabec - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X axis travel (mm): 600 Y axis travel (mm): 450 Z axis travel (mm): 450 A axis travel (mm): +/- 110 C axis rotation (degrees): +/- 360 Number of pallets: 1 Table dimensions (mm): - Table load capacity (kg): - Cutting feedrate (X, Y, Z) (mm/min): 20,000 Rapid traverse (X, Y, Z) (m/min): 35.0 Main spindle speed (rpm): 50 - 10,000 Spindle power (kW): - Spindle taper type: ISO SK40 Spindle torque (Nm): - Tool magazine type: Chain Tool magazine capacity (positions): 30 Ibedpfx Aaexak A Hsbjc Max. tool diameter (mm): - Max. tool diameter (adjacent pots empty) (mm): - Max. tool length (mm): - Max. tool weight (kg): - Coolant tank capacity (l): - Through spindle coolant (bar): - EQUIPMENT EROWA MTS Zero Point Clamping System: Included RENISHAW OMP60 Probe / Through spindle cooling: Included MACHINE DIMENSIONS Length (mm): 2,130 Width (mm): 2,300 Height (mm): 2,750 Weight (kg): 6,500

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 Ibsdpetmtxmefx Aabsc x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: used, Year of construction: 2005, x-travel 850 mm y-travel 700 mm z-travel 500 mm c-axis 360 0 a-axis 135 (-110/+25) Grad 0 Ibodjxbtnhopfx Aabsc

Condition: excellent (used), Year of construction: 2006, Opportunity to purchase this outstanding 5-axis HERMLE C30U including RS automation, an additional tool magazine ZM157 and multiple pallets. Available for immediate delivery and can be inspected in operation upon appointment. More information on request. Control HEIDENHAIN iTNC 530 X-axis travel 650 mm Y-axis travel 600 mm Z-axis travel 500 mm Spindle speed range 18000 rpm 1/MIN Spindle hours 54225h Tool taper SK 40 Tool Magazine Additional magazine ZM157 (157 positions) Nc swivel rotary table diameter 280 mm Features: Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided Oil Mist Extraction: Provided Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Table axis: a-axis off-center Ibjdpfx Asxbr Rhjabec Table specification: 6-way rotary feed through Internal coolant supply: 80 Filter: paper belt filter Conveyor: scraper belt conveyor Automatic cabin door: yes Polycarbonate safety glass: windows Frequency: 50 hz Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 1998, operating hours: 20,086 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: Heidenhain TNC430, workpiece weight (max.): 250 kg, table width: 540 mm, table length: 540 mm, overall weight: 8,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 20,086 h, coolant supply: 3 bar, spindle nose: ISO 40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, This Hermle C800 U has been taken out of production in working order and can also be viewed in our showroom in working order. Comes standard with machine feet, LANG clamping table for centre clamps, documentation. Swivel range; 20° to the machine / 90° against the machine at 250 kg. Ibedpev Ikucefx Aabsc Coolant reservoir capacity 300L (40 L/min at 3 bar) Machine dimensions; 2.70x2.21x2.93 (LxWxH) Weight approx. 7500 kg

Condition: good (used), Year of construction: 2004, operating hours: 1,09,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Isdpfx Aajxcp Slsbsbc Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, Year of construction: 1999, table diameter 800 mm table load / t table height 870 mm required space 1,60 x 120 x 0,87 m This CNC rotary table was removed from a HERMLE C1200 U machine. Isdpfjw Idxfsx Aabobc Condition: used (untested)

Condition: good (used), Year of construction: 2004, Manufacturer: HERMLE Type: U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 Machine weight: approx. 8500 kg Tool holder: SK 40 X travel: 1300 mm Y travel: 720 mm Z travel: 630 mm Speed range: 18000 rpm Max. table load: 700 kg Operating hours: 50,775 Spindle hours: 21,654 Space required: approx. 3600 x 4500 x 2800 mm Table size: 800 x 1000 Number of tools in magazine: 28 positions Internal coolant supply: 80 bar 3D measuring probe: TS 640 5 axes simultaneous Ibedpfx Aaev S Alnobjc

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 35980007, HERMLE Labortechnik GmbH Benchtop Refrigerated Centrifuge, 35980007, Z 513 K Model: 35980007 Type: Z513K Condition: Used Isdpfxew Dbqrs Aabebc Technical specifications: 230V AC 50/60Hz 15.0A 2530W General information: High-capacity laboratory centrifuge / acceleration device for accelerating electronic components. Manufactured in 1998 Maximum allowable speed: 12,000 rpm Permissible density: 1.2 kg/dm³ Permissible kinetic energy: 65,700 Nm The Z 513 K model is a refrigerated benchtop centrifuge. Various rotors are available for this unit. Speed/RCF value, run time, and temperature are easily set via rotary knobs and displayed on large LED screens. The preset operating parameters are saved after each run. The lid is locked and unlocked by an electrically operated lid lock. The centrifuge features a maintenance-free, brushless induction drive for quiet operation. It is also equipped with a CFC-free, hermetically sealed cooling system (refrigerant type R 404 a). Accessories: Operating manual in German Scope of delivery as pictured

Condition: excellent (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 16000 U/min control HEIDENHAIN TNC 430 Number of axles 5 simultan table rotating 360 ° taper ISO SK-40 table diameter 280 mm rapid traverse 30wer m/min tool change unit 30 -fach weight of the machine ca. 6,5 t dimensions of the machine ca. 3100 x 2400 x 2500 m his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h Ibjdevwgm Topfx Aaboc - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] Isdpfsup Hwxex Aabebc - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply Isdpfxjxcp R Io Aabobc - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: refurbished (used), Year of construction: 2004, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 16429, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, feed length X-axis: 600 mm, feed length Y-axis: 450 mm, feed length Z-axis: 480 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 16,000 rpm, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis Hermle C600U with Heidenhain iTNC530 controller The machine is very well maintained, ready to work immediately. Y-axis bed guide replaced. Geometry adjusted. Available for immediate delivery. Year of construction 2004 X-travel 600 mm Y-travel 450 mm Z-travel 480 mm Heidenhain iTNC 530 Spindle: SK40 Speed range 16000 rpm Feed range 1-30000 mm/min Rapid traverse 35 m/min Number of tool positions 30 Diameter of rotary table 280 mm Swivel range A-axis +20 / -90° Swivel range C-axis 360° Total connected load 30 kW Weight 6500 kg Iodpfx Aewtc Tysabebc With the following accessories: Table probe for tool measurement Electronic handwheel Electronic temperature compensation IKZ 40 bar Swarf conveyor Enclosed cabin roof section Coolant unit Cabinet cooling unit ( RITTAL ) 3 pcs. Height adjustable machine feet 2-circuit factory built-in hydraulics. Can be controlled with M code! Instructions for use Ballbar protocol included

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Ibsdolc N Stepfx Aabsc

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 560 mm, TECHNICAL DETAILS Travel distances Ibjdowynucspfx Aabec x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm Table Clamping surface: 1,000 × 560 mm Spindle Milling spindle speed: 10,000 rpm Tool holder – diameter: SK40 mm Control CNC control: TNC430 Tool magazine Number of tools: 30 MACHINE DETAILS Electrical data Total power requirement: 35 kW Weight and dimensions Machine weight: approx. 8.50 t Space requirement: approx. 2.90 × 3.50 × 3.00 m EQUIPMENT Swivel vice integrated into the left side panel with counter bearing (controlled 4th axis) Centre height 160 mm / centre width 500 mm Wireless measuring probe MP10 Chip tray with coolant pump

Condition: ready for operation (used), Year of construction: 2002, operating hours: 15,346 h, Control Unit Brand HEIDENHAIN Model 426 Main Drive Spindle speed range 7000 rpm Number of axis 3 This 3-axis HERMLE U1000T was manufactured in 2002. A universal machining centre, it offers advanced capabilities for diverse machining needs. If you are looking to get high-quality milling capabilities, consider the HERMLE U1000T machine we have for sale. Contact us for more information. Application Types Milling Ibodpfxswyqg Us Aabsc

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 Ibedpfxoup Hw Eo Aabsc - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 6,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, This listing is exclusively for a robotic cell that originally serviced two Hermle C40U machines. Only the robotic cell is for sale, without any machines. This is ideal for retrofitting automation onto existing machines or as a source for spare parts. - Year of manufacture: 2008, KUKA robot KR210-2 2000, maximum pallet weight 200 kg - Controller: KRC 2 - Designed for pallet handling, not for individual parts - Rack with 51 pallet positions - Setup station - Configured for two machines - Scope of supply: Robotic cell with KUKA robot, controller and KPC2 panel, 16 matching pallets, and adapter plates for integration with machines Very well maintained condition The robot was fully functional until it was dismantled. Note: The robotic cell is immediately available. Iedpsw Sdc Sjfx Aabsbc