Pfeiffer Prism Plus Rga QME 220

Pfeiffer

Year of construction: 1974, condition: used, Pressure: 340 T Length of stroke: 200 mm Down table size: 100x800 mm Distance between up-down: - open 510mm (daylight) - closed 310mm New hydraulic and electric systems Tjdpfx Ae Du Uwsc Nef

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours Tedsu Afu Djpfx Ac Nef • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing pad for the polishing head Location: on stock PICTURES of an identical machine built in the same year

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Todpfx Acefi Tmcs Nsf

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Todpfjdwf Dbsx Ac Nsf

Condition: like new (used), Year of construction: 2022, Helium leak detector Manufacturer: Leybold Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Tjdpfx Acot Urlro Nsf Delivery time: ex stock (u.ü.V.)

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW Todpfx Aeha E S Toc Nsf We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Year of construction: 2023, condition: as good as new (ex-display), Up-stroke construction pressing force 300 kN pressing surface 300 x 300 mm specific force 3,3 N/mm² opening 200 mm Todpokuz T Ujfx Ac Nef heating platen as solid steel plate electrical heated up to 300°C (570 °F) control Siemens S7-1200 with 12" Touchpanel mechanical safety door data collection

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are selling an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 benchtop model Config: E1-F1-G1 50KN Year of manufacture: 2022 Weight: 151Kg Load transducer: 50KN 2530-50kN/165541 Load transducer: 5kN 2530-5kN/166885 Tsdpfx Aswz Iktsc Njf Last service and calibration August 2024 Next service and calibration August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring the patent-pending Instron operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are suitable for performing tensile, compression, bending, peeling, puncture, friction, shear, and numerous other tests and can be used with a wide range of clamping devices and testing fixtures from our extensive accessories catalog. Total height: 1604mm Maximum vertical test space (daylight test - from base to bottom of crosshead): 1198mm Test type: Tension, compression, and zero-crossover operation Basic control mode: Displacement control Load capacity - kN (lbf): 50 (11240) Maximum speed - mm/min (in/min): 508 (20) Minimum speed - mm/min (in/min): 0.05 (0.002) Maximum force at maximum speed - kN (lbf): 25 (5620) Maximum speed at maximum force - mm/min (in/min): 254 (10) Return speed - mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of the set speed at a steady rate and without Load Travel (Crosshead Position) Display Accuracy: In no-load condition, ±0.02 mm (0.0008 in) or ±0.10% of the displayed reading, whichever is greater. Travel (Crosshead Position) Repeatability - mm (in): ±0.015 (0.0006) Load measurement accuracy: ±0.5% of the reading up to 1/200 of the force transducer's rated force. Strain measurement accuracy: ±0.5% of the displayed reading up to 2% of the full scale value, with an ASTM E83 Class B or ISO 9513 Class 0.5 strain transducer.

Condition: refurbished (used), Year of construction: 2015, measuring range X-axis: 1,300 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 1,000 kg, type of input current: AC, Very large 3D CNC measuring machine without measurement software. RC1 controller, motors, scales, etc. were completely overhauled (retrofit) in 2015. Fitted with PH10 rotary swivel head, Renishaw TP20, and probe changer station. The machine frame base dates from 1998. Net measuring volume: X=1300mm, Y=1500mm, Z=1000mm. 3D positioning speed: 666 mm/s. Max. acceleration: 1000 mm/s. Resolution: 0.5 µm. MPE E: 5 + 6L / 1000. Machine is currently in our warehouse. Includes PC-DMIS 2025.1 Pro measuring software and computer with desk. Fully functional. Tjdpfspiqilex Ac Njf

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Purchased new in 2021. Was commissioned but has never been operated, Condition is as new. Tjdpfx Acswalzyj Nef