Laser

Photon Energy Workstation XXL II Piko CEPHEUS 1012

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Ljdozb U Epopfx Alyjah Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm X-axis travel: 89 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe Lasdpfx Aoxflprelyeh For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: new, Year of construction: 2026, functionality: fully functional, OMAX 2652 är en kompakt och högpresterande abrasiv vattenstråleskärmaskin, betrodd av verkstäder och plåtbearbetningsanläggningar världen över för sin snabbhet, precision och pålitlighet. TEKNISKA SPECIFIKATIONER Skärområde: 1 320 x 660 mm X-axelns rörelse: 1 320 mm (52") Y-axelns rörelse: 683 mm (26,9") Z-axelns rörelse: 150 mm Maximal skärhastighet: 4 572 mm/min Skärtolerans: ±0,025 mm Maximal bordsbelastning: 1950 kg/m² Drivsystem: Slutna digitala drivsystem, borstlösa servomotorer Linjär rörelse: Förspända kulskruvar, cirkulerande kullager Muntycke: OMAX MAXJET 5i Z-axel: Programmerbar, motoriserad Mjukvara: Intelli-MAX® Suite (integrerad CAD/CAM) Rördragning: Sax-baserad hårddragning (inkapslade högtryckskomponenter) Vattennivåstyrning: Rapid Water Level Control – nedsänkt skärning under 80 dBA NYCKELFUNKTIONER • Skär praktiskt taget alla material – metaller, rostfritt, aluminium, koppar, mässing, sten, glas, kompositmaterial och plast • Ingen värmepåverkad zon – ingen deformation, ingen oxidation, ingen efterbearbetning behövs • Inga verktygsbyten – minimal uppspänning, snabb iordningställning • Miljövänlig – använder endast vatten och naturligt granatsand-abrasiv • Kompakt format – idealisk för yteffektiva verkstäder Lodpfoy Na U Hox Alyeah • Obegränsad utbildning ingår under maskinens livstid Skick: Fabriksny Leverans: Sverige och Danmark Service & reservdelar: Full support tillgänglig Kontakta oss för pris och mer information.

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate Laedpstr Avijfx Alyjh suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: excellent (used), Clamping range Ø 15-160 mm Max. Workpiece weight 15 kg Weight of the prismatic vice 3.0 kg Ledpfjrry Egex Alyjah

Condition: excellent (used), Year of construction: 1990, High-precision drilling and milling machine Aciera 22 VA Good condition, from a school workshop Year of manufacture approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle mount: Aciera quick-change system Laedpehqm D Nsfx Alyjh Automatic thread cutting Drilling capacity in solid material 25 mm Max. drilling capacity up to 30 mm Height adjustment via hand crank Motor: 1.1 kW Lamp Some quick-change chucks Dimensions WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical specifications subject to change.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,290 mm, overall weight: 3,200 kg, controller manufacturer: MAKINO, controller model: MGF, number of axes: 3, This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total area: width 3000 mm, y 2800 mm • Power: 12 kva, 400 v, 12 a • Table size: 500 mm x 350 mm • Tool positions: 8 Laedpfxox U U Hus Alyoh • Polishing edm is possible with this machine. Extra Information Polishing EDM is possible with this machineFaulty circuit board (machine won't start up) Dimensions Machine Depth 2000 mm

Year of construction: 2022, condition: new, pneumatic tapping arm Model: R1950-08 Power: M2-M8 speed (rpm): 700 Air demand: 750l/min pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Laodpfx Aleipmr Ijyeh Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 27kg Adapter mounting: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Standard accessories for all models: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: used, Column-guided bandsaw, semi-automatic, METORA - KALTENBACH, type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028, year of manufacture approx. 1993 Cutting range: round Ø 380 mm Square 380 x 380 mm Laodpjdzqtgjfx Alyjh Saw blade dimensions: 5650 x 34 x 1.1 mm Saw blade speed: 25-108 m/min, infinitely variable Material feed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor drive power: 4 kW Power supply: 400 volts, 50 Hz - Fully hydraulic bandsaw in a two-column design - Hydraulic saw head lowering with infinitely variable cutting pressure adjustment - Lowering speed infinitely adjustable - Hydraulic clamping of the workpiece with hydraulic bundle clamping from above - Hydraulic unit integrated in the machine base - Material feed roller on the feed side with gear motor (not mounted on the machine frame) - Coolant system with coolant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating element for coolant and hydraulics - Length stop, TRENNJAGER type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop base length 6750 mm, stop travel 5650 mm, stop arm can be hydraulically folded up without roller conveyor Footprint of the base machine L x W x H: 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of the stop system: approx. 800 kg in good condition

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, LOW USAGE - GE FANUC 20-T Ljdpjy U Ntpefx Alyoah