Hot water diesel 200-500bar 21-30l/min.

PTC JTR-H

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards Itodpfx Adefgyicowsb · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Year of construction: 2011, condition: excellent (used), IWN Crusader Crate / Utensil / Tunnel Washer Year 2011 All Stainless steel Power wash and rinse system with digital adjustable temperature controller Chemical dosing facility for wash and rinse system Itedpfx Aegqutcsdwob Gas fired burner with reset facility Complete with extractor fan and ducting In excellent working condition, ready for use.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve Itodpfx Adjfg E Hleweb • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 3,000 l, power: 300 kW (407.89 HP), year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 131 l/min, Woma 325Z P30 diesel-driven high-pressure unit 1000 bar 131 l/min Well-functioning machine, ready for immediate use Machine built into a MAN TGA 26.320 6x2 year 2007 Euro 4 only 64,000 km truck is in top condition EXPORT ONLY Itodpfxjxb Dp Aj Adweb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Itedpswra Ewofx Adwob Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Itodpfsppucajx Adwjb Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: good (used), in total 14 pieces available 3 x SEEPEX Nemo 1 x NETZSCH NM045, GETRIEBEBAU NORD, year: 2001 2 x NETZSCH NM021BY, HANNING 0,75 kW, year: 2014 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 3 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW Iodpfxslhr Hfs Adwstb

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Ijdpfjga Tzxsx Adwjtb Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Hydraulic bag cylinder Motor protection switch Automatic end stop

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, fuel: diesel, rotational speed (min.): 1,800 rpm, type of cooling: water, power: 160 kW (217.54 HP), year of last overhaul: 2025, water pressure: 2,400 bar, pump capacity: 35 l/min, Equipment: type plate available, Hammelmann HDP164, 2400 bar, 35 litres Conjet 324 Numerous accessories included: UHP hose, gun, nozzle, mobile diesel tank, etc. Itedjx Hv N Iepfx Adwsb Contact on WhatsApp!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, operating pressure: 350 bar, pressure: 350 bar, fuel: diesel, power: 3 kW (4.08 HP), New High Pressure Unit Also looking for a New HD unit, we make them to measure for you, here we introduce our latest HD unit, this is unique and is a real all-rounder that has not yet been offered in this way by anyone!!!. Details VIHT2350/20/40/100 (demo) Itedpfxernkgis Adwsb Motor 30 kW at 1500 rpm / 36 kW at 1750 rpm 2 x mazzoni pump 21 liters per minute per pump!!! at 1450 rpm set to 350 bar. Due to the low speed, this engine is nice and quiet. Pressure control by speed and manual adjustment of 2x zero 350 valves, hoses virtually pressureless (10 bar) with closed handle. this allows you to work safely because the hoses and pumps are virtually pressureless, and they build up the pressure when the handle is opened. 2 x burners for making hot water up to 120 degrees, on request we can also offer V+ Steam where we have 140 degrees at the nozzle. This machine makes it possible for 2 employees to work independently at the same time. so with different temperatures and pressure. the drive is specially developed and ensures a long life and easy maintenance. on board are 2 diesel tanks, 1x90 liters for the engine and 1x90 liters for the burners. The machine is developed in such a way that it can run 24 hours a day. it is also equipped with 2 water tanks of 325 liters each, so you have 650 liters of water in stock. The Vibemo easy start panel gives you protection against overheating and low oil level (engine stops) and indicates by means of a sign what is wrong. there is also a protection for low water level, and valve open during operation. You can also check the operating hours, speed and dynamo charging current here. The temperature control is made simple and shows the set and actual temperature. As an extra, we have mounted a 3-way tap as standard that allows you to spray with 350 bar and 40 liters per minute (also with hot water up to 100 degrees max). so it can also be used for example for sewer cleaning or stable cleaning. Furthermore, it is equipped with an emergency stop, internal lighting in the engine room and in the reel room. Reels are made of high-quality stainless steel, just like the burners. Hoses are all standard 50 meters long. Furthermore, equipped with pre-filter water, an intermediate filter per pump. 2 x handle, with 2 x lance flat jet 25 degrees 20 liters, 2 x lance with dirt fear 20 liters, 1 x lance flat jet 25 degrees 40 liters, 1 x lance with dirt fear 40 liters. 2 x pressure gauge for reading the set pressure. 3 x level measurement for diesel tanks and water tank, so everything neat and tidy. Everything built in tandem axle trailer 2500kg lxbxh 300x150x150 We provide a 1 year warranty and a full service package. Delivery time approx. 6 to 8 weeks. Photos are an example and may therefore differ slightly from reality.