Tube filling machine

Romaco Unipac U2080

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20037E2006, total width: 700 mm, total length: 700 mm, total height: 1,540 mm, type of input current: three-phase, filling weight (max.): 250 g, filling weight (min.): 5 g, compressed air connection: 6 bar, overall weight: 500 kg, year of last overhaul: 2025, Used Axomatic AXO 700 tube closing machine suitable for filling and closing aluminium tubes. Method: This machine automatically fills the tubes, closes the aluminium tubes through 4 folding stations, puts a code in the seal and automatically ejects the tubes. The tubes are fed and oriented manually. This machine is set up in our showroom where we are happy to demonstrate the machine. Contact us for an appointment. Technical details: - Min/Max diameter aluminium tubes: 13 – 42 mm. - Tube length from 60 to 250 mm. - The tube holder with tube is lifted 55 mm over the filling pipe during filling. - Min/Max dosage: 5 – 250 ml. - The dosage quantity can be set outside the machine and can be read on a counter. - Capacity: max. 1,200 tubes/hour (mechanical speed). The actual achievable capacity is partly dependent on the operator, the tube quality and the viscosity of the product to be filled. - Electric drive by means of an electric motor of 0.37 kW, 380 Volt, 50 Hertz. - All product contact parts are made of stainless steel 316, suitable for pharmaceutical and cosmetic products. - Rotating table, adjustable in height, with readout of the set heights. - No tube/no filling device. - Coding unit for the tubes - Automatic ejection device for the tubes. - 7-station table. - Standard hopper with lid 55 liter capacity. - Machine frame and plating are made of stainless steel and is equipped with an anti-drip lock on the base, so that no product can enter the drive section. - Stepless speed control from the dashboard. Crjdswnrrbjpfx Aa Neb - Security doors and casing made of stainless steel frame with plexiglass and door security. - Direct machine drive without chain. - Electric control box housed in the frame of the machine.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 913 mm, total length: 634 mm, total height: 1,700 mm, warranty duration: 12 months, compressed air connection: 6 bar, overall weight: 200 kg, power: 1.9 kW (2.58 HP), input voltage: 230 V, Semi-automatic tube filling machine. Efficiency up to 13 tubes per minute. Dose from 5ml to 270ml Tube diameter from 19mm to 50mm Tube height from 70 to 210mm Made in Poland Machine available to view and test at the firm's premises. Jedliński Packaging sp. z o.o. ul. Wodna 3 Credpfxexx Uihe Aa Njb 05-090, Raszyn Poland

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZTF01, Equipment: CE marking, The fully automatic tube filling and sealing machine is a highly automated device for filling and sealing cylindrical metal tubes or composite tubes with paste materials. It adopts SS304 piston pump to fill the paste materials driven my servo motor, that meets GMP standards, and high accurate in filling. It uses PLC programmable control and a photoelectric identification mechanism for accurate and reliable trademark positioning; it uses frequency conversion speed regulation, a composite opening mechanism for indexing and positioning, and is equipped with the latest international folding and sealing mechanism.Widely used in cosmetic, chemical, adhesive and food industries. Codpfxjxum Als Aa Norb

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Norden 700 Plastic Tube Filler Provides outputs of up to 70 tubes per minute and is designed and manufactured to produce the highest possible packaging quality standards at maximum operational efficiencies. Cjdov Hxu Uepfx Aa Norb Plastic and laminate tubes may be sealed using the Norden´s patented Hot-Air Sealing system. Year: 2006 Model:700 Key information: – Production capacity: 70 tpm – Filling volume: 1-300 ml – Tube length: 50-250 mm – Tube diameter: 10-60 mm – Infeed system: cassette – Blow off filling nozzle - Fully working condition

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-120ml; accuracy: ±1%; tube diameter: 10-28 mm (one mould is required for each tube diameter); tube length: 50-180 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900kg. Credpfxev Nldhe Aa Neb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 1992, Manufacturer : Norden Model : Nordenmatic 700 Year : 1992 Type: Automatic tube filling and sealing machine Capacity: 70 tubes max Filling volume: 1 - 300 ml Dosing accuracy: +/- 0.1-0.5% Tube size range: Length: 50-250 mm / Diameter: Ø 10-50 mm Empty tube feeding : automatic Cleaning + Tube orientation device with a stepper motor Sealing Module: HA - Hot Air Number of buckets: 22 units Crjdpfx Aex R D Exja Nob Product feed hopper + dosing pump Vulcanic Vulcatherm cooling unit (year: 2004) - 3.5 kW (10°C - 35°C) / Outlet temperature: 25°C max - min 3°C Laminar flow Machine dimensions: 135 x 190 x 210 cm Weight : 2 400 kg Spare parts sold with the machine. Choose from two formats among many available formats (additional formats can be added as an option). Full documentation available Video in operation available

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Tube holders for plastic tubes Ø 35 mm and 48 mm Crsdpfx Aox Rqlfoa Nob Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-300ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 50-210 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L2270xW960xH2100 mm; machine weight: 1200kg. Codpfsv Nldnjx Aa Nerb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.