Oil tempering device, 250°C

S.I.S.E 250H18 DC76

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Dedpfx Asdmn E Hsp Dewc

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Dwjdpfxjvy Aipe Ap Djc Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 1968, condition: good (used), for aluminium Dwjdo A Dimopfx Ap Dec strip width: max. 1.050 mm strip thickness: 10 - 20 mic

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. Dwedpfx Aewf Anhsp Dsc 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1999, Steel frame, cast iron arms and slides Mounting on 4 profiled rollers on ø25mm slides Blade ø350mm AL30 Cutting height 110mm Cutting capacity 680mm Dedpfx Apsppmtue Dowc Engine power 3kw 3000 rpm extra-flat motor Voltage 380V Engine tilt to the left from 0° to 75° Crank up and down on the front of the machine Suction outlet diameter 120mm 180cm/170cm/H160cm +- 420kg

Condition: used,

Year of construction: 1991, condition: used, pressure 100 t passage width 810 mm Dwjdpfx Aolp U D Nop Doc stroke 400 mm table surface area 1140x740 mm ram surface 1140x740 mm dayligth 670 mm weight of the machine ca. 8 t dimensions of the machine ca. 1800x1800x3000 mm

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Dedsg Rhx Ujpfx Ap Dewc Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min Dedpfofxyh Hsx Ap Djwc return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Year of construction: 1998, condition: good (used), Through-flow spindle oil cooler Manufacturer: SCHMIPKE, Type: DK34-V/SO, Year of manufacture: 1998 Previously installed in a CNC machine. 2 units available. Price per unit. Dimensions: Length 1.4m, Width 0.5m, Height 1m, Weight approx. 250kg. Dwsdpfxod Nmnus Ap Djc