Electronics / Drive technology

SIEMENS 6SC 6101-4B-Z

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm Giodpfxstvf Hto Anyow - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: new, Year of construction: 2025, Laser Engraving Software PhotoGraV, current software version 3.1 Software for the preparation of photo data for laser engraving With "PhotoGraV" you prepare your photos optimally for the laser output and optimize these with regard to the material to be engraved in advance, before you send the file to the laser. The software provides optimal results and this without time-consuming detours and special knowledge in image processing. Delivery range: PhotoGraV software, PDF manual, bonus seminar as PowerPoint presentation and more. applications Godpfx Aocwgq Nonyoiw Delivered as a download (on request on DVD, plus shipping costs). Upgrade from version 2.xx available for: 173, - Euro plus VAT

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Gijdpeu Idfrsfx Anyew Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: excellent (used), Brand: DMTG DALIAN Model: CKE 6180 Z Cnc : FAGOR 8055 iT Turning diameter : 800 mm Turning length: 2.000 mm Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm Gsdpou U Htcofx Anyeiw

Condition: excellent (used), Year of construction: 2006, X 610 Y 405 Z 510mm, ISO 40, cooling trough spindle, Fagor 8055 Giodpstiybqofx Anysw

Condition: used, Year of construction: 1991, KODIA Machining Center Model: B-500 Year: 1998 Gjdpfx Asupkifsnyjiw 10kW

Condition: used, Year of construction: 2004, frequency 50 Hz weight of the machine ca. 2,510 t 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30" x 14.3" Max Table Load: 550 LBS Gisdpfjxgv D Aox Anyew X Axis: 24" Y Axis: 12" Z Axis: 20.47" Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16

Condition: used, Transistor pulse converter for three-phase feed drives with analog control, servo controller SIEMENS, Type Simodrive 610, 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse converters were developed to power the three-phase servo motors 1FT5/1FS5. The dynamic characteristics of these motors are to be utilized optimally. By using appropriate components in the power unit, the pulse converters can be used for a wide variety of tasks. This flexibility is further increased by expansion modules for the power unit area. Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in the scope of supply)) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 % Gedpeh D Syvsfx Anyeiw Number of feed axes: 4 Speed setpoint: +-10 Volt Auxiliary voltage: 24 Volt Relay contact for alarm/ready messages Dimensions WxHxD: 339 x 440 x 300 mm Weight: approx. 25 kg The servo controller is still operational and is installed in a Gildemeister GDM42. Further components from the Gildemeister can be found under the following stock numbers: 60343, 60347, 60348

Condition: used, Year of construction: 2005, Weight 350 kg Dimensions (L/W/H) 1930,0 × 1850,0 × 2490,0 mm x-axis 610 mm y-travel 305 mm Gijdpfxowg Huuj Anyew z-travel 520 mm table length 760 mm table width 360 mm

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 670 mm, total height: 2,700 mm, overall weight: 5,350 kg, spindle speed (max.): 8,000 rpm, product length (max.): 5,440 mm, number of axes: 3, This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine. Giodpfx Aneyg Hapoyow • Table dimensions: 1.500 x 660 mm • Max. table weight: 1.000 kg • X/Y/Z rapid traverse: 20 m/min • Tools station: 24 positions • Max. tool diameter: 80 mm (150 mm) • Max. tool length: 300 mm Technical Specification Taper Size BT 40