Crane arm

Stapler Center Fritz GmbH Teleskopkran 5000 Kg bei LSP 600 mm

Condition: used, mileage: 2,26,206 km, power: 235 kW (319.51 HP), first registration: 10/1981, fuel type: diesel, number of seats: 27, gearing type: automatic, color: white, brakes: retarder, Equipment: air conditioning, bathroom, onboard kitchen, parking heater, This SG 221 HDS was originally intended for shuttle service to Southern Europe, but remained a one-off; nevertheless, it served as the foundation for two further high-deckers of a special kind: the S 215 HDS and S 216 HDS, which would soon bring Kässbohrer many new customers. Additionally, this coach introduced the 'S' designation: it stands for Super, because these new high-deckers truly lived up to their name. With a height of 3.63 meters, the elevated passenger compartment created even more space, accommodating not only more luggage (16 cubic meters) but also additional service facilities. Extra fuel tanks could also be installed without issue. Regardless of which of the two Super-Setras the bus operator chose, the engineering marvel of these two new Ulm models was that, except for the front section, they were 100% modular components from the Series 200 and shared identical bolted assemblies with other Setra touring coaches. The 216 HDS offered space for up to 16 rows of seats. In comparison, the underfloor cockpit variant provided more interior space. With the Setra SG 221 HDS, Kässbohrer had a vision, but due to the ban on running articulated touring coaches through France, they shifted focus in favor of solo vehicles. The SG 221 HDS was subsequently used as a demonstration and information bus at trade fairs and conferences; with its generously equipped kitchen on board, it became a central meeting point for representatives and customers. +++ Unique Vehicle +++ +++ATTENTION!!!!!+++ +++pure restoration project+++ +++not roadworthy / only the engine runs+++ Engine: Mercedes-Benz Mileage according to odometer Transmission: 5-speed automatic Seating: 24+2+1 sleeping seats ---- Safety Retarder * Fog lights Passenger compartment Stand heating * Air conditioning * Tables * Curtains * Jet ventilation * Reading lamps * Double glazing * Footrests * Tap system with bar and large kitchen in rear area * Separate bar area in the center * Lounge area at the front convertible to sleeping area * Refrigerator + additional * Microwave * Rear WC * Driver microphone Exterior Power steering * Tachograph with disc * Sleeping cabin * Driver door * Roof hatches/fans/roof ventilator Other German vehicle documents * Vehicle dimensions: length 18.00m, width 2.50m, height 3.95m * Twin tires * Tires: Front axle approx. 40% Dkjdpfx Afsrmlp Eouoi Our internal vehicle number: 7271 Subject to errors. Pictures and text may differ from the actual vehicle. Over 180 vehicles always in stock.

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 2,500 kg, maximum load weight: 2,500 kg, mast type: telescopic, Samojezdny żuraw akumulatorowy renomowanej włoskiej firmy JMG, model MC25S ze sterowaniem radiowym o udźwigu 2 500 kg. Urządzenie nowe, gotowe do oglądnięcia. Dystrybutor, gwarancja 12 miesięcy. KLASYFIKACJA ŻURAWIA ZGODNIE Z NORMĄ UNI ISO 4301-1: A3 DYREKTYWY EUROPEJSKIE: 2006/42/WE (Dyrektywa maszynowa) 2004/108/WE (EMC) 2006/95/WE (Dyrektywa niskonapięciowa) 2000/14/WE i kolejne zmiany. NORMY ODNIESIENIA: EN 13000:2010 UNI ISO 4301-2:2011 i kolejne zmiany. NAPĘD KÓŁ: Elektryczny NAPĘD WYSIĘGNIKA: Hydrauliczny ZASILANIE: Akumulator elektryczny MAKSYMALNY UDŹWIG: 2 500 kg MASA ŻURAWIA: 2 500 kg KAT NACHYLENIA WYSIĘGNIKA W GÓRĘ: 60 ° KAT NACHYLENIA WYSIĘGNIKA W DÓŁ: -15 ° RAMA: Zaprojektowana i wykonana przez firmę JMG. Ma budowę skrzynkową i odporną na skręcanie konstrukcję ze stali konstrukcyjnej o wysokiej wytrzymałości WYSIĘGNIK: Wykonany z wysokiej jakości blachy stalowej, formowanej i spawanej. Składa się z jednostki podstawowej, hydraulicznego układu teleskopowego i jednego przedłużenia mechanicznego. Odchylanie i wydłużanie jest realizowane hydraulicznie za pomocą siłowników teleskopowych SILNIK JEZDNY: 2 silniki elektryczne 2 kW, 24 V AC, klasa izolacji H SILNIK POMPY: Silnik elektryczny 3 kW, 24 V DC, klasa izolacji H NAPĘD: Elektroniczne sterowanie prędkością, typ MOSFET AKUMULATOR: 24 V 420 Ah, ze wskaźnikiem ładowania PRZENIESIENIE NAPĘDU: Przednia oś napędzana przez 2 przekładnie zębate KOŁA: Przód: superelastyczne, 18x7-8", 2 szt. Tył: superelastyczne, 15x4 1/2 -8", 2 szt. HAMULCE: Automatyczne na kołach przednich SKRĘCANIE: Skręcanie na tylnych kołach za pomocą silnika elektrycznego. Maks. kąt skrętu ± 90° STEROWANIE: Obsługa za pomocą radiowego pilota zdalnego sterowania UKŁAD HYDRAULICZNY: Zasilany wyciszoną pompą zębatą 3 kW. Siłowniki sterowane przez rozdzielacz elektro-proporcjonalny z radiowym pilotem zdalnego sterowania. Filtr i zawór bezpieczeństwa. Ciśnienie robocze maks. 22 MPa. ZABEZPIECZENIA: Elektroniczny wskaźnik i ogranicznik momentu obciążenia WYPOSAŻENIE STANDARDOWE ŻURAWIA: • Udźwig maksymalny 2,5 t • Napęd na przednie koła poprzez 2 reduktory (po jednym na koło) • Wysięgnik teleskopowy hydrauliczny rozsuwany (1 sekcja stała, 2 sekcje teleskopowane) • Ręczne przedłużenie mechaniczne wysięgnika • Bateria akumulatorów 24 V 420 Ah • Stacjonarna ładowarka akumulatorów Dkodpfx Afowtppzeuei • Oświetlenie robocze • Oświetlenie ostrzegawcze • Gaśnica • Sterowanie radiowe wysięgnika i kół jezdnych • Elektroniczny wskaźnik i ogranicznik obciążenia zgodny z normami CE • Kąt wychylenia wysięgnika +60° / -15° • Deklaracja zgodności z normami CE • Instrukcja obsługi, dokumentacja techniczna, deklaracje ZAMONTOWANE WYPOSAŻENIE OPCJONALNE: • Wciągarka hydrauliczna 2,5 t • Opony nierysujące • System uzupełniania wody w akumulatorach • Ładowarka mobilna zamontowana w pojeździe • Manualny 3 pozycyjny wysięgnik bocianowy 1,0 t

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 Dedewn H Auspfx Afuski 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: used, 4,000 running meters of construction profiles, C-shape galvanized Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Dsdjur Ikrjpfx Afueki Negotiated price: € 4.90/running meter net from stock Goods are in stock. Transportation and installation possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), 10,000 pieces Inserted gratings Gratings for pallet racks galvanized Inlay grids in different sizes, mesh sizes, load-bearing bar and weight load available: Negotiation price: from € 15,-- net per m² from stock Larger quantities on request! Insertion grid Mesh width Load bearing bar Load bearing bar direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99,5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Second-hand, very good condition, see pictures. Goods are in stock. Transportation possible on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas Dkedped Hvvgjfx Afuoi clean-swept premises Liquidations quick-

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Dksdpfjd Du T Iox Afuji Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Year of construction: 2026, condition: new, BEFARD XP602 Glass Mounting Vacuum Suction Cup • Maximum load capacity 600 kg • 8 suction cups • Two-speed vacuum system • Remote control for vacuum release • Battery powered • Manual rotation 360 degrees • Lock at every 90-degree rotation • Full vertical and horizontal adjustment Additional options: • HS spacers • spare battery • transport trolley • pallet box Dodpeiauz Nofx Afujki Other models available gripper with a load capacity of 300 kg, 450 kg, 800 kg, 900 kg, 1000 kg Available in the selected color

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Dkjdjg Ngixspfx Afuei Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights Dedpfxow S Ii No Afuoki - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: good (used), Year of construction: 2022, Stow Frames: 9000x1100x100 - 600 pcs - 95 EUR 9500x1100x100 - 200 pcs - 100 EUR 10000x1100x100 - 90 pcs - 105 EUR Beams: 2700x130 mm (3000 kg load capacity) - 8744 pcs - 11 EUR Dodpfjqzhncex Afueki 3600x160 mm (4000 kg load capacity) - 378 pcs - 14 EUR Leg protections - 890 pcs - 6 EUR/pc