Sweeping Machine

Staplerkehrmaschine V 1751 GSKM

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Gedpfx Asv Rpxljh Hott Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, IMH-OBC-Optimized block saw Cuts blocks for four-way pallets. How does the machine work? The block material is loaded onto the chain conveyor and transported to the pusher, which feeds it to the cutting zone. The block material is measured by the machine before cutting and it also calculates which lengths need to be cut in order to optimize usage and produce no waste (or as little waste as possible). The machine can process 4 different block lengths in the same pass and each block can be optimized separately. Optionally, the machine can be equipped with a double drive, which enables the simultaneous processing of two different block materials. block materials at the same time. The feed chain and the circular saw blade are driven by a standard electric motor, while the linear module is driven by an AC servo for optimum performance and precision. The measuring arm, the material holder in the saw and the air blower are pneumatically operated. The machine is controlled and monitored by its own PLC via a control panel. The machine is designed for continuous and reliable processing of pallets. It combines professional precision with a user-friendly set-up. Changeover time 1-5 minutes Block length 75 mm* 45 blocks / min * Block material length 3 900 mm or longer. Block: 75-150 x 75-150 x 75-100 mm ( length x width x height ) Squared timber material: 800-5800 x 75-150 x 75-100 mm ( length x width x height ) Gtsdperkk Udsfx Ah Hst This machine is available in different versions. IMH has various additional machine modules that can easily be added to existing machines to achieve a higher degree of automation. This is just one example of the many possibilities that can be realized with IMH machines. Since 01.01.2024 we have taken over the exclusive representation for IMH machines in Germany. The range includes high-quality machines for pallet production that are known for their quality and reliability. Please contact us to find out more about IMH machines or to arrange a personal consultation. Gebrüder Göbel - your partner for IMH machines in Germany. We look forward to supporting you with your projects!

Condition: used, Year of construction: 2019, Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg Gedpfx Asr A S E Hoh Hott

Condition: used, Year of construction: 1995, functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 5,200 kg, Large chipper, ideal for pallets or similar. Gtsdpfx Aeu Apkijh Het Built like a tank, weighs 5 tons. Rotor width 1300 mm. Motor 37 kW. Travel to rotor approx. 1.3 m. With discharge screw.

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! Gtodpfsi E H Ikjx Ah Hot complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head Gtedpfjvb Dcaox Ah Het - complete splash housing - coolant device, chip conveyor *

Condition: used, Year of construction: 2012, x-axis 350 mm y-axis 250 mm z-axis 256 mm U-axis +/-70 mm V-axis +/-70 mm dimension of workpiece 750 x 550 x 256 mm Working hours 29.559 h Gtedpswtr Dzofx Ah Hst -edm hours 29559h

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 420 h, lifting height: 9,900 mm, lifting power: 454 kg/m, fuel type: electric,

Condition: good (used), Year of construction: 2009, functionality: fully functional, Recycled board end-cutting machine. Utilization of recycled board Gtodpfx Asurmqdjh Hjt

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; Gedstz H Egopfx Ah Hett * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE