Diesel Forklift

SveTruck 13660

Condition: good (used), machine/vehicle number: 3022, Year of construction: 2002, load capacity: 13,600 kg, lifting height: 4,090 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,890 mm, total width: 2,680 mm, operation weight: 18,200 kg, additional equipment features: Manual sliding cabin, Dual tread, Warning triangle, Equipment: lighting, SveTruck 13660-32 from Uniktruck Tjdpfx Acjul Dq Ue Nef

Condition: excellent (used), Year of construction: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE 12,000 BPH Speed: 12,000 Bph Blow molding machine SIPA Year: 2009 Number of cavities: 8 Preform elevator Preform orientator Chiller Formats of 05 L - 1 L - 1.5 L Monoblock TETRA PLAST RFA-40 Year: 1995 Filling type: aseptic Cap type: prethreaded plastic 38mm Caps elevator Dryer EUROPOOL Year: 2007 Tsdotqfcgopfx Ac Njf Type: air blades Labeling machine KRONES Type: roll-feed Sleever machine CLEVER 2019 With Steam Tunnel Bottle rejection system FMT dryer Year: 2011 Type: air blades SMI Bundler Year: 2009 TWIN PACK handle applicator Year: 2000

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway Tedpovtpcijfx Ac Nof - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, KHS Can Filler Filling Canning, Innofill, 50 Filling valves, Standard Can 500ml / 0,5liter, 50cl, Sleek Can 330ml / 0,33l, 33cl, Can end lid 202, with Ferrum can seamer F8, year: 2008, with can end lid magazine Tsdpfx Aowk Itasc Nof

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations Tsdpevphiysfx Ac Nsf * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Tedpokkiwxsfx Ac Njf

Condition: used, Clinching unit TOX - Pneumatic-Hydro Toxpress Hydro-pneumatic press TOX Pressotechnik KRAFT PAKET Type CRS 03.62 No.: 207599.2 Tedpfsdz Sqqox Ac Nsf Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 tons Projection: 20 mm Installation height: 32 mm - Built-in clinching tool - Pneumatic valve for control - Push-through joining or clinching - For creating a form-fit connection between 2 sheets without piercing or heating the sheets - Mounted on the stand - with simple electrical control and foot switch Own weight: 230 kg Comes from a production plant, sold without electrical control

Condition: used, Cantilever racking, heavy duty racking -without insert trays: none available -Double sided -consisting of: -Shelf: each with 3 uprights, 5.4 m high -Double-sided support arms: 500 mm long -Bolt load capacity: 795 kg Tedpfxocn Am Io Ac Nsf -Payload per side: max. 7000 kg -screwed -Number: 3x shelves available -Price per piece -Own weight: 1250 kg / piece

Year of construction: 2007, condition: ready for operation (used), Weight: 2t, an inspection is possible, with documentation. Tsdsrp E Nropfx Ac Nsf

Condition: new, Year of construction: 2025, functionality: fully functional, coil weight: 15,000 kg, sheet thickness steel (max.): 6 mm, coil width: 1,600 mm, coil outer diameter: 1,600 mm, type of input current: AC, air pressure: 6 bar, Cut to length line is used for cutting the sheet metals from coil to sheet horizontally, straightening the sheets and after cutting to length operation stacking the sheet at the end of the line. Standard CTL line is contained as machinery units on automatic cut to length machine are decoiler, straightening, feeding, shearing unit and stacking unit. Tedjvmghvjpfx Ac Nef All parts of the Cut to Length Line are manufactures in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Guillotine and Stacking Unit can be controlled from one point. The system is controlled by PLC system, set in the customer language.