Cleaning unit

TENNANT Tennant 7100

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Dwedpfx Acev Twi Rjged

Condition: used, scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm Dsdpfxsc R S E So Acgswd -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm Dsdpou Icmhsfx Acgjwd -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Dsdpfxoh Hd A Ss Acgowd Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options. Dwodpfsd I Aw Esx Acgsd

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle Dedpfx Acjx D Iuzsgowd • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control Dodpfx Aou Nu R Iocgowd *

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons Dwjdpfx Acsb A Ny Ejgsd -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right Djdpfxjz Rl Eij Acgewd - Sliding roof - Nozzle changer - CoolLine

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm Dwodpom Nb Riofx Acgjd