Forklift

Toyota 8 FD F 30

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 10,454 h, load capacity: 3,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,420 mm, drive type: Diesel, Diesel forklift Nledjyt Txropfx Alhec ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Sideshift, 3rd valve, heating, full cabin,

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, empty load weight: 1,800 kg, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Condition (Technical): New Njdpfoumvb Iox Alhslc Description: The CAT DE110E2 is an emergency power generator for construction sites, industry, and events. With its economical diesel engine and robust design, this generator is ideally suited for providing power during power outages and for mobile and continuous use. Durable, versatile, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this device, we also offer aerial work platforms and telescopic loaders for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,168 h, load capacity: 3,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: simplex, construction height: 2,160 mm, drive type: Diesel, Diesel forklift truck ISO class: ISO class 3 = 2,500 - 4,999 kg Nljdpey A Uxysfx Alhjc Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab,

Condition: used, machine/vehicle number: 52-8FDF30-84089, Year of construction: 2022, operating hours: 29 h, lifting height: 5,000 mm, free lift: 1,270 mm, fuel type: diesel, fork length: 1,200 mm, Empty weight: 5.080 kg Lifting capacity: 3.000 kg Maximum passing height: 242 cm Dimensions of cargo space: 287 x 133 x 242 cm Remanufactured: Yes Front tyre size: SE Rear tyre size: SE Please contact Karl Leitner for more information = Additional options and accessories = Nlsdpfx Alsu Dwgnehoc - 4th valve - Heater

Condition: used, Year of construction: 2012, operating hours: 4,500 h, CAT POWER GENERATOR/FLOODLIGHT SYSTEM Type: GEP 18 LT Generator 16.5 kVA Diesel Nlodowb Nhtepfx Alhjc 4-cylinder Mast with 6 floodlights 4-point outriggers 80 km/h high-speed Hot-dip galvanized chassis Height-adjustable drawbar Ball head and jaw coupling etc...

Condition: like new (used), functionality: fully functional, Year of construction: 2015, fuel type: diesel, Equipment: cabin, Forklift with sideshift, left-right fork positioning, and triplex mast. Nodpfx Aex Sxvzslhelc

Year of construction: 2009, condition: excellent (used), I sell the throughfeed CNC drilling machine HIRZT Livra/B, Year 2009. Working width up to 820mm Nledsnxqdwepfx Alhjc Configuration: 14 + 6 + 2 pcs. drilling units Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Total area covered: 2000 x 2000 (+800 +800mm) Total weight: 1350 kg. With full documentation and CE. Very good condition. Available immediately.

Condition: used, Year of construction: 1998, pressure 3500 t stroke 900 mm Distance table / ram, stroke down 1000 mm distance table / ram, stroke up 1900 mm table surface area 3150 x 2150 mm ram surface 3150 x 2150 mm Total Weight of Tool max. 30,0 t Weight of Tool Top Part max. 20,0 t speed down 400 mm/s working speed 0,9 - 9,2 mm/s Hydraulic Operating Pressure 280 bar oil volume 5500 l rated current 760 A voltage 400 V frequency 50 Hz power requirement 425 kW weight 231,0 t SPECIAL DEAL as is where is, stored in dismantled condition WITHOUT putting into operation / WITHOUT additional work free loaded to truck Hydroformpress / IHU-Press maximum preforming force approx. 1000 t Total tool weight approx. 30 t upper tool weight approx. 20 t · Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed · Parallelism control: over the length side of the press · Light curtain: front and back side · Light barrier: left and right side · Slide locking: TDC-Position · Two-hand control panel: 1 · Independent high pressure circles water hydraulic system: 2 · Max. working pressure: 3.000 bar · Displaced volume of each Intensifier: 3,74l Nodpfx Alovuukhshslc · 2 Filling pumps: volume and pressure depending the power grid · Location of pressure intensifier: to be determined · Main pumps: located on the press crown/oil tank · One die change table: 6,7 x 2,15 m · Max. die size: 3,15 x 2,15 m · Clamps on slide: Hydraulic · Clamps on the bed: Mechanical · Electrical control: Schuler Multiview HF Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price

Condition: used, Diesel Forklift Truck LUGLI Type 455e Front forklift, compact forklift Factory No. 5364010504 Year of manufacture: 2001 Rated capacity: 4,500 kg Lift height: 4,000 mm Fork length: 1,500 mm Njdpfxju H R I Do Alhjlc Fork carriage width: 1,300 mm Overall height: 2,720 mm Overall width: 1,460 mm Overall length without forks: 2,900 mm Unladen weight: 6,800 kg - Duplex clear-view mast with 150 mm free lift - Hydraulic side shifter (200 mm) - 4-cylinder PERKINS diesel engine, Type 1004.42, 60 kW - Hydrostatic drive with double pedal control (like Linde) with Linde/Poclain components - Fully enclosed operator cab with heating and removable doors - Fully hydraulic steering - HUSS particulate filter with electric cleaning via 230-volt plug connection - 2 front work lights, 1 rear work light - Yellow warning beacon on protective roof - Solid rubber tyres (front NEW 250 x 15, rear 23 x 9 - 10) - 5,650 operating hours (displayed) - New TÜV UVV inspection (surcharge EUR 150 net) Good condition

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 548 h, load capacity: 5,000 kg, lifting height: 4,800 mm, free lift: 1,610 mm, fuel type: electric, mast type: triplex, construction height: 2,320 mm, fork carriage width: 1,440 mm, fork length: 1,200 mm, empty load weight: 8,434 kg, total length: 3,000 mm, drive type: Elektro, construction width: 1,475 mm, Electric 4-wheel forklift Load center: 500 Njdpju Dyxtsfx Alhslc Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tires type: Superelastic Front tires size: 28x12.5-15 Rear tires type: Superelastic Rear tires size: 21x8-9 Battery voltage: 80V Battery Ah: 930Ah Battery year of manufacture: 2023 Description: In addition to this Clark model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this GEX50 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, Full free lift,