Electric Pallet Trucks

Toyota SWE160L

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,010 h, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,694 mm, fuel type: electric, mast type: triplex, construction height: 2,171 mm, fork length: 1,150 mm, empty load weight: 1,439 kg, total length: 895 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Load center: 500 Mast type: Triplex Technical condition: normal Front tire type: Polyurethane Rear tire type: Polyurethane Pgedpfxoz Awyqe Alwst Battery voltage: 24V Battery capacity: 300Ah Battery year of manufacture: 2018 Impulse control, initial lift, full free lift, CE certificate.

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Pjdpfx Asq N E U Aolwogt Number of working hours 270 h electrical ja

Condition: used, functionality: fully functional, machine/vehicle number: 6612625, Year of construction: 2018, operating hours: 2,063 h, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, drive type: Elektro, High-lift pallet truck Chassis number: 6612625 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Inspected and maintained according to UVV regulations, technically and visually refurbished. Podpfxozyxbqo Alwegt

Condition: good (used), machine/vehicle number: 50815097536854, Year of construction: 2020, operating hours: 247 h, load capacity: 1,600 kg, lifting height: 4,150 mm, fuel type: electric, mast type: other, overall weight: 1,440 kg, 5223263 Der Toyota SWE160L aus der BT Staxio W-Serie ist ein leistungsstarker Elektro-Hochhubwagen, der speziell für Arbeiten auf unebenen Böden und Rampen entwickelt wurde. Mit einer Tragfähigkeit von 1.600 kg und Hubhöhen von bis zu 4,15 m ist er die ideale ... Pgedpjzp Ughefx Alwet

Condition: used, Year of construction: 2012, functionality: fully functional, The machine is in good condition and is equipped with a loader and a disc changer. Pedpfxsx Swyfe Alwsgt

Condition: good (used), machine/vehicle number: 54003544850774, Year of construction: 2020, operating hours: 358 h, load capacity: 1,600 kg, lifting height: 4,150 mm, fuel type: electric, mast type: other, overall weight: 1,440 kg, enginetype: Electric, manufacturer: Toyota Podpfxszp Ubrs Alwogt

Condition: used, functionality: fully functional, machine/vehicle number: 6569568, Year of construction: 2018, load capacity: 1,600 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,370 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Chassis number: 6569568 Load centre: 600 mm Pgjdexnfc Rjpfx Alwjt Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Transmission: Electric AC, stepless Condition: Ready for use and fully operational Technical condition: Very good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Description: Toyota BT Staxio SWE160L, 1,600 kg @ 600 mm, triplex mast 5,400 mm, overall height approx. 2,370 mm, 24 V lead-acid

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 8.5 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Picchio - └ Year of manufacture: 2018 - └ Main motor power [kW]: 2.5 - └ Capacity [m³/h]: 108 - └ Connection diameter [mm]: 80 - └ Oil free: Yes - CNC options: Laser for vacuum pod positioning, Offcut conveyor, Barcode reader - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Current consumption [A]: 47.2 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Pgodpfxsxtbgps Alwst Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, machine/vehicle number: 2488118, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, construction height: 5,056 mm, power: 1.8 kW (2.45 HP), battery capacity: 300 Ah, battery voltage: 24 V, battery weight: 270 kg, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, ground clearance: 19 mm, turning radius (outer): 1,493 mm, front tire size: 230, rear tire size: 85, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical specifications - Year of manufacture: 2019 - Drive: Battery Pgsdpfx Aloyqzkwewst - Operation: Walk-behind - Load capacity: 1,600 kg - Support arm lift: 2,000 kg - Lift height: 4.15 m - Height with mast extended: 5.06 m - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 – 6.0 km/h - Max. lifting speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, typical signs of use.

Condition: used, functionality: fully functional, machine/vehicle number: 2488108, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, power: 1.8 kW (2.45 HP), battery capacity: 300 Ah, battery voltage: 24 V, battery weight: 270 kg, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, ground clearance: 19 mm, turning radius (outer): 1,493 mm, front tire size: 230, rear tire size: 85, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical specifications - Year of manufacture: 2019 - Drive: Battery - Operation: Walk-behind - Load capacity: 1,600 kg - Support arm lift: 2,000 kg - Lift height: 4.15 m - Height with mast extended: 5.06 m - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 – 6.0 km/h - Max. lifting speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, typical signs of use. Pedpfeyqzk Dox Alwjgt

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Pedjvwbp Aepfx Alwsgt