Corner Cleaner

Urban SV 815/4

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm Guodjht Rl Eepfx Ag Seh

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm Gedpsh Nvyzjfx Ag Ssuh -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar Gujdsu Nigkjpfx Ag Seh total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Guedpfsfpb Nmex Ag Soh Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW Gsdpfx Aemiik Tjg Sjuh universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) Gsdpfxoum Uflo Ag Sjuh - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: good (used), Year of construction: 1994, Molecular filling system / diagonal filling weight 520 kg Guedpfeir Efuox Ag Ssh

Year of construction: 2017, condition: ready for operation (used), A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible. Gujdpfx Aszg Itieg Seh

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Adjustable profile support arms, facilitating positioning and ensuring operator safety. Machine in perfect working condition, subject to regular annual maintenance, complete with manual. Gsdoyw Rx Ejpfx Ag Souh

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement Guedpfxetycdks Ag Sjh