Tugger

Volk DFZ 120H

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong Nkedpfx Adsfg E Hpswot reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Tyre type front: Pneumatic Tyre size front: 400/70-24 Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light. Nkedpjw Eqddefx Adwjt

Condition: used, mileage: 3,99,130 km, power: 300 kW (407.89 HP), first registration: 04/2008, overall weight: 33,000 kg, fuel type: diesel, color: orange, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, parking heater, * Mercedes Benz Actros 3341 LAK 6x6 * Radstand ca. 3,80 m * Winterdienstfahrzeug * Anbauplatte vorne + 2 hydr. SW * Zusatzbeleuchtung vorne * Sonnenblende * Rundumlicht * Salzstreuerhydraulikanschlüsse * Anbauplatte seitlich + 1 hydr. SW * Euro 5 * Ad- Blue * Telligent Automatik Getriebe * Klima * Federung: Blatt/Luft/Luft * ABS * AHK + Duomatik + Druckluftanschlüsse * Stanheizung * Differenzialsperren * el. FH el. Spiegel, Spiegelheizung * Frontscheibenheizung * Steuergerät für Anbauplatte vorne * Steuergeärt für Anbauplatte seitlich * 2x Luftsitz * Dachluke * Telefonvorbereitung * Lufthörner * Radio MB Truckline CC 70 * Reifen 385/65R22,5 ca. 80% * 315/80R22,5 ca. 60% * 315/80R22,5 ca. 40% * 1. Hand * Behördenfahrzeug Njdpewi Aupsfx Adwokt * deutsches Fahrzeug * Gegen Aufpreis: * Meiler Kipper+ Hilfsrahmen mit Zylinder * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m Nedpfod Izmajx Adwjkt CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: good (used), functionality: fully functional, empty load weight: 6,500 kg, overall weight: 18,000 kg, tire size: 580/65 R22.5, Year of construction: 1996, Model: 16000TS Nksdpfotq Uurjx Adwot 16.000 liters with suction

Year of construction: 2000, condition: like new (used), PADELTTHERM through-hull glow ovens Type: ROH 50 X 15 X 150 - E Circuit diagram no.: 6 - 16 -4. Bp Order no.: 9070/4 Nksdpfx Adocn Tr Ijwot Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Rated power 32 KW Protection class IP 54 Rated current 58 Amp. max. temperature 1050° C Weight 2250 Kg very little used in a UNI

Condition: new, table length 2200 mm table width 1500 mm stroke height 1850 mm weight max. in kg 2000 kg 260 mm total power requirement 1,5 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,45 t dimensions of the machine ca. 2,2 x 1,5 x 0,26 m Nodpfsupxwksx Adwskt The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg Nksdpfx Adeb A Tcfswjt

Condition: excellent (used), SK 50 holders (28627) Various manufacturers: Bilz Kelch Sandvik Clarkson Approx. 90 pieces Nksdpowl U Tcsfx Adwot

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Technical condition: New Nkodsw Eqdqopfx Adwst Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch